Printable Version of Topic

Posted by: infraredcalvin Dec 29 2014, 04:29 PM

Anyone interested in a well used 2 post lift? Company I work for bought a used car dealership with a rear covered service area. Prior owners left in a hurry and left these behind.

I have 2, will need to be cleaned up and serviced, missing a few parts, a quick search looks like parts are readily avail.

Pick up only, they are currently installed, but no power to verify operation.. Located in Fullerton, CA.

Looking to get about $300 for the BendPak & $500 for the Western. Prices are OBO.

I'll post pics in a bit, please feel free to ask any questions here.

Thanks,
Pat

Posted by: Mark Henry Dec 29 2014, 05:18 PM

Great price!

The first question anyone should ask is are they single or 3 phase hook-up?

Posted by: JmuRiz Dec 29 2014, 06:43 PM

Someone out west snatch this smoking deal up ASAP!
I already have a 4-post, at that price I'd add a 2-post too.

Posted by: euro911 Dec 29 2014, 09:07 PM

Pat, can you send me some pix? I'm in Torrance, CA

Posted by: infraredcalvin Dec 29 2014, 10:55 PM

Some pics... Sorry they are big, had to upload to photobucket, I also apologize for the extraneous junk in the pics, I wasnt really dressed to get dirty...

The Western has most of its parts. Looks to need a couple of pulleys and the structural inserts for the lift arms. Three are a few in ground lifts at the site with the inserts, whoever buys is welcome to scavenge parts from them. Looks to be operating off 220v.

The Bend Pak looks much more abused. The motor is missing, replacements can be had online, I would stay away from anything with a 110 feed. The arms are there but the pad inserts are missing (also avail online).

Both could use a good degrease/clean, paint, and lube. I'd also replace cables hoses and associated hardware.

I was going to keep, them for my shop, but I have a lift already and need to focus my efforts on my cars not my shop!!!

Western:
http://s1033.photobucket.com/user/infraredcalvin/media/Western%20Lift/imagejpg10.jpg.html

Bend Pak:
http://s1033.photobucket.com/user/infraredcalvin/media/Bend%20Pak%20Lift/imagejpg1.jpg.html

Posted by: rgalla9146 Dec 30 2014, 08:30 AM

Also, for inside use, better check your ceiling height.

Posted by: forrestkhaag Dec 30 2014, 09:26 AM

Would you be available for me to drop by today to see the offer? I am a cash Buyer
Forrest

Posted by: infraredcalvin Dec 30 2014, 09:42 PM

(Delete)

Have full access to site now...

Posted by: infraredcalvin Jan 6 2015, 11:57 PM

Bump

Yes these are small projects, but reap big rewards...

Posted by: infraredcalvin Mar 16 2015, 11:41 PM

Bumping this again. Still have these... Make me an offer, also willing to trade... I need conversion/race parts...

Posted by: McMark Mar 19 2015, 03:14 PM

Height measurement is critical.

Posted by: bfrymire Mar 19 2015, 05:15 PM

Forwarded this to a buddy.

Posted by: infraredcalvin Mar 19 2015, 11:44 PM

Thanks, never thought to measure, I'll do so and post next time I'm out. I'm guessing around 10' tall.