Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ FS: 5-Bolt Rear Wheel Hubs

Posted by: earossi Jan 27 2015, 10:50 PM

Rear Wheel Hubs from a 1987-89 Carrera 911. Excellent condition. These are OEM hubs from a 911 for the 5-bolt conversion - not drilled out 914 hubs. Perfect for /6 conversions where additional torque handling is needed. Porsche P/N 911-331-065-33. $125 plus shipping.

Attached image(s)

Posted by: DMCF1Fast Jan 28 2015, 12:12 AM

Interested.... PM sent.

Posted by: restore2seater Jan 28 2015, 12:13 AM

Sent PM.

Posted by: andrew15 Jan 28 2015, 07:35 AM

I have a set of stub axle flanges for these if the buyer needs them - looking for $100/pr shipped
They are for the 108mm CVs and came from a early 70's car

Regards
Andrew M

Posted by: forrestkhaag Jan 28 2015, 09:39 AM

Andrew: Would this bundle of hubs and stubs mate to my 71 914 rear end? I would take all if so; please advise as soon as possible and i will forward payment.

Posted by: andrew15 Jan 28 2015, 09:56 AM

forrestkhaag - earossi, the guy at the top of the ad, is the one with the hubs - I've got the stubs that fit in them and together, they would fit the 914 trailing arm - hope that clarifies

Posted by: bdstone914 Jan 28 2015, 10:20 AM

QUOTE(forrestkhaag @ Jan 28 2015, 09:39 AM)

Andrew: Would this bundle of hubs and stubs mate to my 71 914 rear end? I would take all if so; please advise as soon as possible and i will forward payment.

They also need a 5mm spacer installed between the bearing and hub to make up for the longer bearing used in the later hubs. You need a pair of course spline output flanges for the stock 914 trans as well as 911 CV's and custom length axles.

Posted by: earossi Jan 28 2015, 05:41 PM

Hubs are SOLD,