Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ project engines 1.7,1.8,2.0

Posted by: 914ltd Feb 2 2015, 08:38 PM

Several engines for sale, 2.0 run tested 1 cylinder 90 PSI (low) No intake or exhaust, no noises, had water in the oil, flushed and fresh fill $400. 2.0 from 912E, no engine number, looks like it was rebuilt by Goober, big fin broken off 1 head. $350. 2.0 block, crank, rods, ideal way to build a cheap 2.0 or 2.1, $200. several available. 1.7,1.8 good block, rods, crank, 2 for $200. Good running, compression tested 1.7 $400. 1.8, $500 both with FI, no exhaust. Now is a good time to buy even if it's for a distant future project, look at the prices on 356 engine parts now. Brad

Attached image(s)

Posted by: 914ltd Feb 4 2015, 09:17 PM

Bump

Posted by: sled9146 Feb 15 2015, 09:38 AM

You have a PM for some core motors

Posted by: 914ltd Feb 25 2015, 10:03 PM

Lots of good core engines as well as a few ready to drive (usual need for reseal)
Brad P914LTD@yahoo.com