Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB 2.0L heads
Posted by: Benny v Feb 14 2015, 04:56 PM
Hello i'm looking for 2.0L 914 engine heads.please offer everything.
Thanks Benny
Posted by: Steve Snyder Feb 14 2015, 07:38 PM
I have a set of cylinder heads from a 1974 GA code engine at the shop. They had new valves, guides and dual springs installed two years and about 9,000 miles ago. They have no cracks, dropped valve seats or thread issues and all studs are in place. I won't be back to the shop until Tuesday, however, so I cannot send you any pictures for a few days.
I would be looking for $550 + shipping (which would be pricey if they are going to Belgium). Let me know if you want me to post pictures. PM sent.
Regards,
Posted by: Spoke Feb 15 2015, 01:10 PM
I have a set of cylinder heads from a 1974 GA code engine at the shop. They had new valves, guides and dual springs installed two years and about 9,000 miles ago. They have no cracks, dropped valve seats or thread issues and all studs are in place. I won't be back to the shop until Tuesday, however, so I cannot send you any pictures for a few days.
I would be looking for $550 + shipping (which would be pricey if they are going to Belgium). Let me know if you want me to post pictures. PM sent.
Regards,
Steve,
If the OP passes, I will take the heads.
Posted by: Steve Snyder Feb 15 2015, 01:28 PM
I wil post pictures on Tuesday (might slip until Wednesday).
Posted by: 9146986 Feb 15 2015, 09:41 PM
I've got three different sets of 2.0 heads that I had gone over by Mark Stephens High Performance about 17 years ago, all sitting in a box since I got them. Stock, improved, and big valve carb heads. PM me if you're interested, not cheap though.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)