I need the fitting that connects the tunnel shift rod to the base of the shifter on a side shift assembly. It is the fitting that claps on the then splined end of the shift rod in the tunnel and is #19 in the photo at this link:
http://www.pelicanparts.com/914/Parts/Peda...ge_side_big.htm
There are two #19's the shift linkage and the fitting itself. I just need the fitting.
Thanks, Bill
Link does not work but I think this is the part you are describing. There is also a bushing that is used with the bolt that attaches it to the shifter. Let me know if that is what you need.
Bruce
Attached thumbnail(s)
Thanks. I have the bushing, I just need the link #19. Bill
Oops
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)