Printable Version of Topic

Posted by: Geezer914 Feb 21 2015, 01:57 PM

FS: 1 Set of 4 1.8L Ljet, Standard Motor Products S-697 Fuel Injector Connectors. $10 shipped.

All SOLD! Thanks, John


Attached thumbnail(s)

Posted by: bdstone914 Feb 21 2015, 02:06 PM

I will take a set if t hey are for D jet.
Bruce

Posted by: jacksun Feb 21 2015, 02:15 PM

I would like a set too, and if they are compatible with my 1.7L fuel injectors??

thank you

randal

Posted by: porsche913b_sp Feb 21 2015, 04:11 PM

I will take the last one. Let me know how to pay. Thanks
Will they work on my yellow 1.7 injectors. Have you tried them on some injectors

Posted by: Jeff Bowlsby Feb 21 2015, 05:03 PM

Them are LJet connectors boyz.... not correct for D-Jet.

Posted by: edrotol Feb 21 2015, 05:51 PM

will take a set for a 76 2.0 if applicable. thanks.

Posted by: Geezer914 Feb 21 2015, 05:54 PM

According to Standard Motor Products catalog the S697 will fit 1.8L and 2.0L injectors, not 1.7L

Posted by: Jeff Bowlsby Feb 21 2015, 07:47 PM

1.7L and 2.0L 914s are D-Jet not L-Jet. These are not correct for factory 1.7L or 2.0L 914s.

They are correct for 1.8L 914s only.

GLTWS

Posted by: Geezer914 Feb 21 2015, 08:59 PM

Jeff would know, he is the electric guru. Thanks for the info, John

Posted by: euro911 Feb 21 2015, 11:37 PM

Does anybody carry the correct ones for the 1.7L D-jet injectors?

Posted by: Big Len Feb 22 2015, 04:46 AM

I'll take a set. PM sent.

Posted by: Geezer914 Feb 22 2015, 06:06 AM

PM sent

Posted by: jacksun Feb 22 2015, 06:16 AM

tks for the pm, I will be dropping out as I would need D jet connectors.

tks

randal

Posted by: Geezer914 Feb 22 2015, 06:35 AM

Rock Auto lists the Standard Motor Products connectors for a 1.7L and 2.0L as SK21.

Posted by: 74ravenna Feb 22 2015, 06:41 AM

PM sent.

Steve

Posted by: bdstone914 Feb 22 2015, 08:56 AM

Try your local FLAPS. I bought some for a Subaru that were the same. They cost about $ 6 each.

Posted by: euro911 Feb 23 2015, 12:32 AM

Actually, I just need the booties for the connectors ... the boots are what really hold the connectors tight in the sockets on the injectors.

Posted by: G e o r g e Feb 23 2015, 01:00 AM

http://shop.914rubber.com/914-injector-covers-set-of-4-914IJ4.htm

Posted by: euro911 Feb 23 2015, 11:49 AM

A-ha!

Thank you

Posted by: Montreal914 Feb 23 2015, 02:15 PM

pm sent.