Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ Wtb spacers for 914 rear calipers so I can use 911 rotors

Posted by: yrret7 Feb 27 2015, 11:17 PM

How can I use 911 vented rotors with the stock 914 caliper? Does anyone sell spacers to widen the caliper up? I would buy 914-6 calipers but there aren't any for sale:(
Help!

Posted by: G e o r g e Feb 28 2015, 12:47 AM

look down the page to 914/6 parts by Blue 6, he has a pair of /6 calipers for sell.

Posted by: euro911 Feb 28 2015, 01:40 AM

... or contact Eric at PMB. I think he's modified them (with spacers) in the past.

Posted by: davep Feb 28 2015, 08:10 AM

I have the set of spacers that you need.

Posted by: gcrotvik Feb 28 2015, 11:22 AM

You will also need to have 2MM (I believe) milled off the height of the 911 rotors. Again, check with Eric at PMB. He has all the parts (and know-how) you need.

Greg

Posted by: Jeff Hail Feb 28 2015, 04:21 PM

On the shelf ready to go $375 shipped anywhere in the US.

Rebuilt with new piston seals, speed bleaders, rubber caps, o-ring seal for the parking brake. Inner halves zinc coated. Outers finished in any color you want as long its red.

Spacers 14mm with 16 new and correct o-rings between the halves.
Longer stainless steel pad pins.

ARP custom specification M7 12 point bolts.

New pad retaining springs.

Attached image(s)