I've come to the conclusion that I am not going to build a 6 conversion in the future.
So, I'm offering the following parts from my stash to help finish the assembly of #269
SOLD 5 piece Metal Engine Cooling tin $400
SOLD Oil Tank
Filter Console/riser $125
Filler Neck, Dip Stick, Cap $225
Bosch CD box, 3 pin, worked when removed $300
Heat Exchangers, rusty but repairable $650
Heat Exchangers, VGC, bung added for MFI heat riser, painted with aluminized paint when stored $2000
914-6 Muffler $350
Quick 6 engine mount $120
I take PayPal for deposit or full payment, balance can be done by MO or cashier check.
All are plus shipping, unless, you are coming from the western states along I-80 you can pick them up in Nebraska
Keith
Tank, filter tower, filler neck, cap and dipstick
Attached thumbnail(s)
Heat exchanger and Muffler
the top side of the muffler is in fantastic shape and still has the grey paint, Unfortunately, the termites got the bottom side...
Attached thumbnail(s)
I'll take the 914-6 engine sheet metal "cooling tin", all 5 pieces original. Thx! Armando
Dang you Armando!
PM sent on Quick 6 mount
PM sent to Armando awaiting his response
Passing on the Quick 6, going another direction on 3.6 conversion! Thanks
new to this. what does the quick 6 consist of ?? can you post pictures . thks
The quick 6 setup is used to mount a 6 cyl engine using the 4 cylinder engine mounting pods. Where the factory 6's had a mount that went on the front center of the firewall/bulkhead.
Attached thumbnail(s)
Engine tin sold and shipped
Keith,
I'll take these two please.
- 1) Filler Neck, Dip Stick, Cap $225
- 2)Bosch CD box, 3 pin, worked when removed $300
Andy O'
PM sent to Andy O'Soto, NO RESPONSE IN 36 hours. Single post newbie
CD box and filler neck still available.
I have a couple of questions about the muffler. Can you email me at info@mobileinspections.com?
thanks,
George
Dayton OH
Mark
I sent Andy an email via 914world the following day.
Over the past few months, I've had several PMs from newbies that send me a PM saying they will take an item and then nothing....
I'll consider the parts pending.
Keith
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)