Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ SOLD please delete
Posted by: ETMracing Apr 29 2015, 12:28 PM
Smoking deal for someone looking for a easy drop in and go motor. I am only removing because I am switching to a 6.
-this is in my car now and I can test drive or send video clips if shipped-
Car is fast and always starts, I have all the receipts. *if you have a 6 we can work a different deal*
$3,000 cash or paypal(you pay fee)
1.7 case(ea) with 2.0 pistons
-t4 cam .415x278 for carbs
-crank
-full rebuild 2001
-911 valve adj. lock nuts
-Mallory Unilite distributor
-Hyfire VI-AL ignition system
-Bosch blue coil
-Summit racing breather tank-oil-
-oil temp sensor
-*2011 CFR did pushrod seals.
-CB Performance 3.5lbs fuel pump and filter
-Dual Weber 44idf recent rebuild.
-New Tangerine Racing carb linkage/cables
-4-1 Kerry Hunter header to Supertrapp muffler and I can give you my older setup which was heat exchanger minus the heat to a Bursch muffler-removed last month, and I can give you heat exchangers I have had sitting at the shop.
*no leaks at all*
*recent valve adjust*
** so you get engine, carbs, fuel pump, exhaust, ignition, etc., everything you need to run!
301.213.5101 Chris
Posted by: rfinegan Apr 29 2015, 03:56 PM
What Crank was used.
Was the displacement?
estimated shipping to NC 27527
-Robert
Smoking deal for someone looking for a easy drop in and go motor. I am only removing because I am switching to a 6.
-this is in my car now and I can test drive or send video clips if shipped-
Car is fast and always starts, I have all the receipts. *if you have a 6 we can work a different deal*
$3,000 cash or paypal(you pay fee)
1.7 case(ea) with 2.0 pistons
-t4 cam .415x278 for carbs
-crank
-full rebuild 2001
-911 valve adj. lock nuts
-Mallory Unilite distributor
-Hyfire VI-AL ignition system
-Bosch blue coil
-Summit racing breather tank-oil-
-oil temp sensor
-*2011 CFR did pushrod seals.
-CB Performance 3.5lbs fuel pump and filter
-Dual Weber 44idf recent rebuild.
-New Tangerine Racing carb linkage/cables
-4-1 Kerry Hunter header to Supertrapp muffler and I can give you my older setup which was heat exchanger minus the heat to a Bursch muffler-removed last month, and I can give you heat exchangers I have had sitting at the shop.
*no leaks at all*
*recent valve adjust*
** so you get engine, carbs, fuel pump, exhaust, ignition, etc., everything you need to run!
301.213.5101 Chris
Posted by: ETMracing Apr 29 2015, 04:44 PM
2.0 crank was used in the 1.7 case, and 2.0 94mm pistons/cylinders. I would deliver for $200.00 since that way I can insure a quality shipment.
What Crank was used.
Was the displacement?
estimated shipping to NC 27527
-Robert
Smoking deal for someone looking for a easy drop in and go motor. I am only removing because I am switching to a 6.
-this is in my car now and I can test drive or send video clips if shipped-
Car is fast and always starts, I have all the receipts. *if you have a 6 we can work a different deal*
$3,000 cash or paypal(you pay fee)
1.7 case(ea) with 2.0 pistons
-t4 cam .415x278 for carbs
-crank
-full rebuild 2001
-911 valve adj. lock nuts
-Mallory Unilite distributor
-Hyfire VI-AL ignition system
-Bosch blue coil
-Summit racing breather tank-oil-
-oil temp sensor
-*2011 CFR did pushrod seals.
-CB Performance 3.5lbs fuel pump and filter
-Dual Weber 44idf recent rebuild.
-New Tangerine Racing carb linkage/cables
-4-1 Kerry Hunter header to Supertrapp muffler and I can give you my older setup which was heat exchanger minus the heat to a Bursch muffler-removed last month, and I can give you heat exchangers I have had sitting at the shop.
*no leaks at all*
*recent valve adjust*
** so you get engine, carbs, fuel pump, exhaust, ignition, etc., everything you need to run!
301.213.5101 Chris
Posted by: wndsnd Apr 29 2015, 06:32 PM
Smoking Deal...
Posted by: ETMracing Apr 30 2015, 07:42 PM
Replied to must pms, yes I can do a discount if certain items are unwanted, carbs/headers/ignition... and I have videos being uploaded of a start up and a Drivers Ed. http://smg.photobucket.com/user/etmracing/media/Mobile%20Uploads/InstaShot_20150430_213325_zps0tctb3pb.jpg.html
Posted by: billh1963 May 1 2015, 08:49 AM
How many miles on the engine? Rebuild was in 2001?
Posted by: rfinegan May 4 2015, 01:36 PM
PM sent
-Robert
Posted by: rfinegan May 5 2015, 04:57 AM
Thanks For the video, Lets work out a plan when you can pull the motor and Im thinking I will pick up.
I will take it!
-Robert
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)