I know I'm cheating on the rules, oh well sue me.
I need most of the upper engine tin for a 72 bus, I think all the T4 carb years work.
cylinder tins
firewall tin
the #1 cylinder (carb preheat) upper and lower tins (3 pieces IIRC)
All the heat exchanger riser tubes
the 3 pcs fan area tins.
Looking for solid, I already have rusted out junk tins.
Solid and good shape, but it doesn't have to be all pretty, it's getting blasted and powdercoated.
Shipping to Canada, I'll pay actual shipping cost, so you don't have to figure out the shipping, just give me a price on the parts. Needed ASAP.
I will only deal with a known member.
Thanks
Hi,
I have all the tin for a '74 1800 bus. Not sure what the market is for type 4 tin, but it's been going up.
I'm in SoCal - 92354. Look into shipping and make me an offer?
These are the main tin bits i need. Plus the firewall tin and and the cylinder tins, I'll get pic's of these.
The three in the bottom pic (rear pulley area tins) might be useable.
The risers I need (in the 1st pic) are the down tubes from the fan to the exchangers.
I do have good riser tubes to the flappers and good flappers, those are the most expensive bits.
Tom that is one of the tins I'm after, but the shipping on just the one piece is expensive to Canada. So thanks but I'll hold out to see if someone has the complete set first.
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)