Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ 23 mm master cylinder

Posted by: 72wrxporsche914 Jun 13 2015, 09:23 AM

23 mm master cylinder new never used in box . Asking 70 with shipping .


Attached thumbnail(s)
Attached Image

Posted by: fixer34 Jun 13 2015, 07:15 PM

Excuse my ignorance, but isn't that the part number for a 19mm master cylinder?

Was there even a 23mm one made?

Posted by: LukeD Jun 13 2015, 07:19 PM

If it's a 19mm I'll take it!

Posted by: 72wrxporsche914 Jun 13 2015, 11:13 PM

I'm pretty sure it's a 23 mm as its stamped on the body of the master cylinder . I have have one on my car and does it stop also have 83 911 brakes too.


Attached thumbnail(s)
Attached Image

Posted by: 72wrxporsche914 Jun 13 2015, 11:15 PM

QUOTE(LukeD @ Jun 13 2015, 06:19 PM) *

If it's a 19mm I'll take it!

Luke it's not a 19mm but I have the same one in car and it bolted up with no problems . I always say more is better but let me know if you want it.

Posted by: bdstone914 Jun 14 2015, 02:27 AM

No, more is not always better. A 23 mm master will give a very hard pedal with little feel. Not a good idea on a stock brake setup. Uro has a bad rep regarding quality. That is the part number for a 19mm. The 23 is probably a mold number.



Posted by: Eric_Shea Jun 14 2015, 08:22 AM

That's a 23mm.

Posted by: 72914wrx Jun 14 2015, 11:19 PM

Sold pending payment . Thank you Eric

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)