Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ -6 motor mount

Posted by: brant Jul 9 2015, 02:41 PM

This is unusual
I bought it about 10-12 years ago
it could be home made, the welds are very nice so it isn't poorly made
it is also very strong....

this mounts onto the early style -4 motor bar to allow for a "quick -6" type of 6 cylinder motor mount

however, the early -4 motor bars are very strong.
this would be much stronger than the old PMS quick -6 mount that used to be available.

I'd like get out of it for what I paid 10 years ago
the welds themselves are excellent

$100

Attached image(s)

Posted by: mr914 Jul 9 2015, 05:28 PM

Referred to as a Quick 6 mount

Posted by: brant Jul 10 2015, 03:28 PM

QUOTE(mr914 @ Jul 9 2015, 05:28 PM)

Referred to as a Quick 6 mount

only stronger...
I believe the old PMS quick six had a tendency to crack on the engine bar where it mounted to the chassis (a piece of tubing)

this will never crack with an early style -4 motor bar