Printable Version of Topic

Posted by: Garold Shaffer Jul 10 2015, 03:55 PM

FS - Used Weltmeister 22mm front sway bar with the triangles that go under the gas tank for mounting. As you can see it will need some clean up and new bushings. It was from a 73 project car that I picked up. The PO installed the bar and some other "go fast " stuff on the chassis then pushed it outside behind the barn where it sat for approx. 10 years. New bars sell for $350 - $400 depending where you get them. Based on the condition of the drop links I will take $220 and that includes shipping to you in the USA.


Sold


Attached image(s)

Posted by: Nutter965 Jul 10 2015, 04:21 PM

PM'd you Garold

Posted by: bahnzai Jul 10 2015, 09:19 PM

Interested too.
Thanks
Danny

Posted by: madmax914 Jul 12 2015, 09:49 PM

I have that same sway bar, do you know where I can buy new bushings? Having a hard time finding them. These are not tapered like the ones Pelican sells.

Any help would be appreciated.

Posted by: john77 Jul 13 2015, 03:07 PM

Paragon have them, I bought a set about a month ago to replace the old ones that were on mine. The 22mm aren't listed on the site, only the 19mm, but if you contact Jason either through here (member: Paragon) or through their site he should be able to find you some.

http://www.paragon-products.com/

[Sorry for hijacking your thread, Garold.]

Posted by: bahnzai Jul 15 2015, 12:14 PM

Hi Garold,
Did this sell? Still interested if it is available.
Thanks,
Danny

Posted by: Garold Shaffer Jul 15 2015, 12:17 PM

Yes it is sold