Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB 914/4 front torsion bar
Posted by: kbaydurcan Jul 17 2015, 07:01 PM
I have a 1975 914/4 that needs a front torsion bar for the passenger side.
Posted by: 914Sixer Jul 17 2015, 07:21 PM
Stock bar was only 17 mm.
Posted by: kbaydurcan Jul 18 2015, 08:15 PM
Stock bar was only 15mm.
Stock is fine. I'll take one for stock since only the passenger side is needed but would be willing to buy the pair of a different size. The car is now on the side lines and is my daily driver so any help is appreciated, thanks.
Posted by: Larmo63 Jul 18 2015, 08:23 PM
Stock torsion bars are plentiful here. Someone will have one here that they will probably give you save for the cost of shipping. I may still have a set myself, I'll check.
Posted by: bdstone914 Jul 18 2015, 08:33 PM
I have a good right torsion bar. $20 plus cost of shipping from 92505 CA.
I could have it shipped Monday.
If you are interested PM your address for a shipping price.
If you do find one locally make sure if does not have wear marks. Most of the ones I have pulled are not usable do to heavy wear marks that are caused by distorted rubber bushing that allow the bar to rub on the inside of the A arm.
Posted by: ruby914 Jul 18 2015, 08:50 PM
Stock bar was only 15mm.
Stock is fine. I'll take one for stock since only the passenger side is needed but would be willing to buy the pair of a different size. The car is now on the side lines and is my daily driver so any help is appreciated, thanks.
I have a single. it's 18 mm. I was thinking this
was stock. Sending PM.
Posted by: ruby914 Jul 18 2015, 08:57 PM
In the time it took to find and clean it, I was thinking I better hurry or BD will have it boxed and shipped. Looks like He replied as I want looking for it. 
Posted by: kbaydurcan Jul 18 2015, 09:03 PM
In the time it took to find and clean it, I was thinking I better hurry or BD will have it boxed and shipped. Looks like He replied as I want looking for it. :D
I first thought the stock torsion bar for a 1975 914/4 was 21mm. I was told it was 15mm, 17mm, and now 18mm on this thread. I believe it is 17mm, no?
Posted by: bdstone914 Jul 18 2015, 09:36 PM
In the time it took to find and clean it, I was thinking I better hurry or BD will have it boxed and shipped. Looks like He replied as I want looking for it.
I first thought the stock torsion bar for a 1975 914/4 was 21mm. I was told it was 15mm, 17mm, and now 18mm on this thread. I believe it is 17mm, no?
Actually 17.9mm. Close enough. that is stock.
Posted by: bdstone914 Jul 18 2015, 10:37 PM
In the time it took to find and clean it, I was thinking I better hurry or BD will have it boxed and shipped. Looks like He replied as I want looking for it.
Thats right. I'm older and faster.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)