Printable Version of Topic

Posted by: Blue6 Aug 6 2015, 09:02 PM

I have 15 of these. If anyone has a broken up set and would sell one or two, let me know. Thanx

Posted by: bdstone914 Aug 6 2015, 09:46 PM

Close enough?


Attached thumbnail(s)

Posted by: Blue6 Aug 7 2015, 11:26 PM

With the lack of responses, I would deduct that there isn't any matching out there, so, yes Bruce I will take those. Also need some other bits from you including a front license plate bracket. If I can't wait until the next G&R&BS swap, I'll call you ... Thanx. Dave

Posted by: bdstone914 Aug 8 2015, 04:24 PM

Have not made the announcement but I am planning the next swap meet for Oct 11.

I have some that are a closer match on the head part that use a threaded stud instead of a one piece. Free on the lug nuts. Fell free to come out to the shop. I have front license plates brackets powder coated.

Bruce

Posted by: Bossman Aug 8 2015, 08:22 PM

Hey Dave, check JBugs.

Posted by: Blue6 Aug 9 2015, 12:09 AM

Thanks for the lead Dave,your a gentleman and a scholar....

Posted by: The Cabinetmaker Aug 9 2015, 06:24 AM

Is that a12mm thread and a14mm shank? It looks like the bolt for a Dan Gurney western wheel, but the gurney bolts are not turned down if I recall correctly.

Posted by: Blue6 Aug 9 2015, 11:44 PM

You are correct, it is for the Dan Gurney wheel . Putting them on my 74, but short one lug stud..

Posted by: The Cabinetmaker Aug 11 2015, 04:54 AM

I have a bolt but not the washer.

Posted by: Blue6 Aug 13 2015, 12:21 AM

Sent you a pm.....