Printable Version of Topic

Posted by: Brian_Boss Aug 25 2015, 12:32 PM

I'm looking for:
The cable that goes from the heat lever to the flapper valves
The barrel connectors on the ends of said cable which connect to the flappers. never mind
The double male to male QD connector that is on the engine bay heater blower.



Hopefully all from one person.

Posted by: 914Sixer Aug 28 2015, 03:20 PM

Brian,
The barrel connectors are VW bug.

Posted by: Mblizzard Aug 28 2015, 06:17 PM

I think I got the barrel connectors from 356 Devoation.

Posted by: mepstein Aug 28 2015, 06:40 PM

I found some at flaps

Posted by: Brian_Boss Aug 29 2015, 07:14 AM

Yeah, I'm embarrassed to say i found them on my own website once I searched by p/n (311129777) for $1.20 ea. Was hoping to let it slide into obscurity without admitting my mistake

Note: ebay is not good place to buy these - mother of all markups...

If anyone has one of these connectors, I still could use one. I hate to cobble up something right at the top of the engine bay.

Posted by: The Cabinetmaker Aug 29 2015, 08:21 AM

3.95 each at bughaus. Item #111937077

Posted by: bdstone914 Aug 29 2015, 09:10 AM

The heater cables are available new. About $30 OEM Porsche. 75-76 are a different length. We got a new one ( not sure which PN) which does not have the plastic coating and the bend was in the wrong spot. Heated the bend, straighten it and rebent it compared to the original. Was too long ( of a 72) at each heater box so we added zig-zags to take up the slack. It worked.

70-74 PN = PCG42407501
75-76 PN = 91442407503