Printable Version of Topic

Posted by: ric birks Aug 29 2015, 11:47 AM

950.01 for the 5 lug suspension and breaks (911)SOLD.
$900.01 for the 14 X 5.5 Fuchs alloy wheels and tires, no caps. SOLD.
$50.01 for the steering wheel.SOLD.
$50.01 for the back glass.
$250.00 for the quick six mount.
$200.01 for the dash/ash tray.
$500.01 for the body, hood, deck lid, doors, engine cover.
$100.01 targa top.
$350.01 for the 5 speed transmission. SOLD.
$550.01 for the Oe 914-6 oil tank, found 1 pin hole in the top area when filling it with solvent. Will need to be brazed up.
$650.01 for the Oe 914-6 oil cooler.SOLD.
$500.01 for the Oe 914-6 heat exchangers, ends have been removed for custom mufflers.
$400.01 for the 911 gages.
$150.01 rear sway bar.
$9.00 for the vintage Alpine am/fm cassette stereo SOLD.


Attached thumbnail(s)

Posted by: bdstone914 Aug 29 2015, 12:25 PM

I will take the steering wheel pending confirmation of the part number. It appears to be a leather wheel. Is that correct?

Can you also provide more details regarding 5 lug suspension? Front or rear or both?
What year 911 did it come from? What calipers are included?
Pictures will help.

Thanks.

Posted by: mepstein Aug 29 2015, 02:00 PM

Looks like later wheel


Attached thumbnail(s)

Posted by: ric birks Aug 29 2015, 03:51 PM

Not a 914-6 wheel. It looks like leather but is not.

Posted by: ric birks Aug 29 2015, 03:55 PM

Front suspension is from a later 911 with a under body sway bar attached. Not really sure on the rears but the rotors haven't been drilled for the 5 lug hubs. Pics would surely help. Will get them as soon as can.

Posted by: bdstone914 Aug 29 2015, 08:10 PM

It could be 914-6 rotors but would be good to know if 911 hubs and axles were used.
Measure the diameter of a CV and the thickness of a front rotor. Late 911 will be 24mm earlier is 20mm. Picture of strut will show if it is Boge or Bilstein or Koni.

Posted by: gcrotvik Aug 30 2015, 11:29 AM

PM Sent regarding the body condition.

Posted by: Beakster Aug 30 2015, 11:46 AM

PM sent for the Door Panels .. Thanks

Posted by: Beakster Aug 30 2015, 11:55 AM

What year 911 is the oil temp/ pressure gauge from and would you sell that separate ? Thanks

Posted by: Jmedeiros Aug 31 2015, 07:29 AM

PM Sent. :-)

Posted by: two914-6s Aug 31 2015, 09:20 AM

Hi Ric,
I'm just interested in the A -arms and the underbody sway bar. Are you willing to sell those parts separately?

Posted by: ric birks Jul 16 2016, 08:16 AM

Bump to the top.

Posted by: MasterCylinder Jul 16 2016, 09:53 AM

Can you post pictures of the heat exchangers?
What year and engine is the 911 tach from?

Thanks

Posted by: ric birks Jul 16 2016, 10:31 AM

Will do on the exchangers. Not sure of the year on the gauges. Tach must be out of an E as it redlines at 7K.

Posted by: ric birks Jul 16 2016, 10:46 AM

Here you are. More like headers now, but still somewhat exchangers! [attachmentid=564
253]


Attached thumbnail(s)

Posted by: ric birks Jul 16 2016, 10:49 AM

Bottoms are bad and will need some work to be used as exchangers.

Posted by: ric birks Jul 17 2016, 02:47 PM

Hope the pics help!

Posted by: mb911 Jul 17 2016, 04:33 PM

I know I could fix those exchangers if someone wanted.

Posted by: Nor.Cal.914 Jul 17 2016, 07:38 PM

Pictures of the engine mount please? Thanks in advance!