Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ Parting out 1975
Posted by: jkuehn Oct 1 2015, 09:01 PM
To rusty to save buts it's all there so email me with what you need jeffkuehn1@charter.net
Sold Items
EFI Wiring Harness
Driving lights
Trunk Lock
Jack / Straps
wheels
Front Bumper Shocks
Headlight Motor covers
Front Trunk Floor Section
Center console gauges
Frt brake baking plates
Seat belts / Receivers
Seat Brackets / Slides
Windshield Trim
Attached image(s)
Posted by: BeemerSteve Oct 1 2015, 09:09 PM
To rusty to save buts it's all there so email me with what you need jeffkuehn1@charter.net
I'm in need of a sheet metal item.....the top flat area of the rear trunk just above the center support. They only re-manufacture the lower panel. I need this only if you are cutting the car.
Thanks in advance!
Steve
Posted by: jkuehn Oct 1 2015, 09:23 PM
To rusty to save buts it's all there so email me with what you need jeffkuehn1@charter.net
I'm in need of a sheet metal item.....the top flat area of the rear trunk just above the center support. They only re-manufacture the lower panel. I need this only if you are cutting the car.
Thanks in advance!
Steve
I can cut whatever u need as long as have specifics of what exactly
Posted by: 396 Oct 1 2015, 09:26 PM
Pm on rear set of brake calipers
Posted by: RazorbackFan78 Oct 2 2015, 05:10 AM
If in decent condition, I'm interested in:
Driver side Mirror, assuming it's the Late version mirror
Steering Wheel
oh and the driver side door catch pin
email sent
Posted by: altitude411 Oct 2 2015, 06:49 AM
interested in the sail trim and window trim. What's the condition? pics please.
Posted by: BeemerSteve Oct 2 2015, 07:31 AM
To rusty to save buts it's all there so email me with what you need jeffkuehn1@charter.net
I'm in need of a sheet metal item.....the top flat area of the rear trunk just above the center support. They only re-manufacture the lower panel. I need this only if you are cutting the car.
Thanks in advance!
Steve
I can cut whatever u need as long as have specifics of what exactly
Thank you Jeff! I'll send you an email later today with a photo of what I need.
Posted by: mrfourteen Oct 2 2015, 07:42 AM
how much for the rims?
Posted by: BENBRO02 Oct 2 2015, 08:52 AM
How much for the windshield shipped to Virginia?
Posted by: Kalani Oct 2 2015, 09:37 AM
How is the targa latch pad .....i take it is in reasonable shape
Posted by: BeemerSteve Oct 2 2015, 10:54 AM
To rusty to save buts it's all there so email me with what you need jeffkuehn1@charter.net
I'm in need of a sheet metal item.....the top flat area of the rear trunk just above the center support. They only re-manufacture the lower panel. I need this only if you are cutting the car.
Thanks in advance!
Steve
I can cut whatever u need as long as have specifics of what exactly
Thank you Jeff! I'll send you an email later today with a photo of what I need.
Also, I'm in need of the headlamp assemblies too. Email sent!
Steve
Posted by: jkuehn Oct 2 2015, 11:12 AM
How much for the windshield shipped to Virginia?
Windshield is cracked or else i would be using it as i need one also
Posted by: 396 Oct 2 2015, 11:36 AM
Any updates on my pm on the rear set of brake calipers?
Posted by: BENBRO02 Oct 2 2015, 12:04 PM
How much for the windshield shipped to Virginia?
Windshield is cracked or else i would be using it as i need one also
How about the jack, tool kit, and manuals?
Posted by: fsh2liv Oct 2 2015, 12:26 PM
side marker light/lenses
pm sent
Posted by: KevinGieg Oct 2 2015, 12:52 PM
The rear trunk button lock shiped to 94583. How much for the steering wheel? p.m. sent Thanks
Posted by: jkuehn Oct 2 2015, 12:57 PM
Any updates on my pm on the rear set of brake calipers?
I actually have two sets one off the car and the ones still on neither of which i have had a chance to take a pic of
Posted by: jkuehn Oct 2 2015, 12:58 PM
How much for the windshield shipped to Virginia?
Windshield is cracked or else i would be using it as i need one also
How about the jack, tool kit, and manuals?
Don't have those sorry
Posted by: RazorbackFan78 Oct 2 2015, 01:05 PM
Whereabouts in Missouri are you? I'm in Northwest Arkansas. I could drive up if its not too far.
Posted by: BeemerSteve Oct 2 2015, 01:13 PM
To rusty to save buts it's all there so email me with what you need jeffkuehn1@charter.net
I'm in need of a sheet metal item.....the top flat area of the rear trunk just above the center support. They only re-manufacture the lower panel. I need this only if you are cutting the car.
Thanks in advance!
Steve
I can cut whatever u need as long as have specifics of what exactly
Hi....did you receive my email?
Thank you Jeff! I'll send you an email later today with a photo of what I need.
Also, I'm in need of the headlamp assemblies too. Email sent!
Steve
Posted by: 396 Oct 2 2015, 02:50 PM
Any updates on my pm on the rear set of brake calipers?
I actually have two sets one off the car and the ones still on neither of which i have had a chance to take a pic of
Great, picture of the parts and asking please. You can pm me your reply if you want.
Ps, I'm looking for the late model ones...74-76.
Thanks
Posted by: brooks944 Oct 2 2015, 03:59 PM
Interested in the drivers side front bumper shock. Price and shipping to zip 37763?
Posted by: Beakster Oct 2 2015, 05:36 PM
Door Panels ? What condition are they in .. And how much ? Thanks
Posted by: jkuehn Oct 5 2015, 08:58 PM
Whereabouts in Missouri are you? I'm in Northwest Arkansas. I could drive up if its not too far.
I'm in St Louis
Posted by: Jonnydaub Oct 6 2015, 09:14 PM
Interested in all the windshield trim pieces, i have a 73 would it fit?? How much to ship to 68152??
Posted by: Catorse Oct 7 2015, 03:17 PM
I would like the chrome trim on each side of the car - the upright sail panel. See pic. 
Posted by: altitude411 Oct 7 2015, 06:00 PM
I would like the chrome trim on each side of the car - the upright sail panel. See pic.
Interested in all the windshield trim pieces, i have a 73 would it fit?? How much to ship to 68152??
Guy's, please notice post # 6 as I was first in line for these parts and haven't received an answer as of yet... Thanks
Posted by: Jonnydaub Oct 7 2015, 06:40 PM
Apologize but your post said window trim not windshield trim
Posted by: altitude411 Oct 7 2015, 07:19 PM
Apologize but your post said window trim not windshield trim
It sure does damnit...
Sorry about that. I concede the windshield trim on that point. I'd still like first right of first refusal on the sail trim if available.
Posted by: Jonnydaub Oct 7 2015, 07:33 PM
Haha no biggy, you did comment first. Ball is in your court. Ill gladly take it if you dont
Posted by: 80cap Oct 8 2015, 04:51 AM
how are the fog lights ?
Brian
Posted by: brant Oct 8 2015, 05:42 AM
I need to find a 1975 fuel pump cover in the front trunk
Shipped to 80503 please
Posted by: Catorse Oct 8 2015, 09:37 AM
So do I get my chrome trim as per my post above? What do we need to do to close this deal? I don't think anyone else asked for the same pieces.
Posted by: altitude411 Oct 8 2015, 01:54 PM
So do I get my chrome trim as per my post above? What do we need to do to close this deal? I don't think anyone else asked for the same pieces.
Did you read post #6? Those are the pieces I asked about but haven't heard if they are available or not.
Posted by: Catorse Oct 9 2015, 10:06 AM
So do I get my chrome trim as per my post above? What do we need to do to close this deal? I don't think anyone else asked for the same pieces.
Did you read post #6? Those are the pieces I asked about but haven't heard if they are available or not.
Whatever. I'm out. This is a gong show.
Posted by: 396 Oct 9 2015, 10:47 AM
So do I get my chrome trim as per my post above? What do we need to do to close this deal? I don't think anyone else asked for the same pieces.
Did you read post #6? Those are the pieces I asked about but haven't heard if they are available or not.
Whatever. I'm out. This is a gong show.
Im afraid we think alike . I f
you look, I too inquire and requested a reply. My thoughts last week, if this person ever replies, Im simply go to decline. If they can't followup with a reply, just think what would happen if you had a problem with the parts you've paid for. Im out too.
Posted by: jkuehn Oct 13 2015, 02:15 PM
So do I get my chrome trim as per my post above? What do we need to do to close this deal? I don't think anyone else asked for the same pieces.
Did you read post #6? Those are the pieces I asked about but haven't heard if they are available or not.
Whatever. I'm out. This is a gong show.
Im afraid we think alike . Ifyou look, I too inquire and requesteda reply. My thoughts last week, if this person ever replies, Im simply go to decline. If they can't followup with a reply, just think what would happen if you had a problem with the parts you've paid for. Im out too.
If you read my initial post i asked that you email me directly with what your after and if you had done so you would've gotten reply.
Posted by: euro911 Oct 14 2015, 02:48 AM
Wow, noticing a lot of drama starting up in the classifieds these days ...
Posted by: jkuehn Oct 21 2015, 12:50 PM
how much for the rims?
$300 for all 5 wheels, one has a littls rash
Attached image(s)
Posted by: bob_emm Oct 22 2015, 09:07 PM
I need an ignition lock and key. Injectors too.
Posted by: mikolmikol Oct 25 2015, 10:34 AM
pm'ed for the window rollers
Posted by: 396 Oct 25 2015, 11:51 AM
pm'ed for the window rollers
If its not available, Bruce Stone in Riverside should have them. Look at his f/s posting.
Posted by: malcolm2 Oct 25 2015, 12:33 PM
hey what does the rear targa pad look like? I would be interested if you can snap a few photos.
Clark
Posted by: Easyb Oct 26 2015, 06:58 AM
Hi. I'm interested in:
- the Door Locks assembly or internal parts for the passenger side.
- Cylinder drive
ed2111AT GMAIL>COM
Posted by: Jett Oct 26 2015, 09:18 AM
Hello I'll take the two front bumper shocks and two headlight motor side covers (black side covers). The PO painted them 
Posted by: euro911 Oct 26 2015, 11:28 AM
Did you post the VIN # ?
http://www.914world.com/bbs2/index.php?act=membervins
Posted by: aharder Oct 26 2015, 06:33 PM
Looking for a rear bolster on the targa.
Do you still have one?
Posted by: TBanda Oct 26 2015, 09:16 PM
Hi, I am looking for the window handles, sun visors and most importantly the engine lid rain pan/catcher. Let me know and thanks,
Posted by: mgp4591 Oct 27 2015, 04:04 AM
Email sent...
Posted by: jkuehn Oct 28 2015, 10:30 AM
hey what does the rear targa pad look like? I would be interested if you can snap a few photos.
Clark
Attached thumbnail(s)
Posted by: easy e Oct 28 2015, 10:50 AM
Wheels: SOLD
Posted by: easy e Nov 6 2015, 02:14 PM
Hi Jeff,
On 10/29 you said the wheels might ship on the 30th.
It's a week past the 30th.
Can you provide an update?
Posted by: jkuehn Nov 10 2015, 11:50 AM
Hi Jeff,
On 10/29 you said the wheels might ship on the 30th.
It's a week past the 30th.
Can you provide an update?
Sorry for the delay in responding but was out of town last week at SEMA, anyway your wheels also shipped last week so if you don't already have them you will soon.
Posted by: napasteve Nov 10 2015, 02:18 PM
I'm interested in the seat rails. Sending PM.
Posted by: gabeurgelles Nov 10 2015, 09:44 PM
Interested in the front sway bar
Posted by: Dunc Nov 15 2015, 11:40 AM
To rusty to save buts it's all there so email me with what you need jeffkuehn1@charter.net
Sold Items
EFI Wiring Harness
Driving lights
Trunk Lock
Jack / Straps
wheels
Front Bumper Shocks
Headlight Motor covers
Front Trunk Floor Section
Price for:
1. Fresh air box with fan
2. Heater controls
3. Roll bar padding
Thanks
Dunc
Posted by: pilothyer Nov 15 2015, 08:45 PM
Do you have a headlight switch ? How much shipped to 35603 ? I tried email but it bounced back...................Jerry
Posted by: jkuehn Nov 18 2015, 02:33 PM
To rusty to save buts it's all there so email me with what you need jeffkuehn1@charter.net
Sold Items
EFI Wiring Harness
Driving lights
Trunk Lock
Jack / Straps
wheels
Front Bumper Shocks
Headlight Motor covers
Front Trunk Floor Section
Price for:
1. Fresh air box with fan
2. Heater controls
3. Roll bar padding
Thanks
Dunc
1. Fresh air box with fan - Just sold
2. Heater controls - Rusted out
3. Roll bar padding- Cracked
Posted by: jkuehn Nov 23 2015, 07:23 PM
Do you have a headlight switch ? How much shipped to 35603 ? I tried email but it bounced back...................Jerry
I have a switch but not sure i want to part with it
Posted by: R_u_dd Nov 23 2015, 11:29 PM
I would like the seats and seat back and the rails if Napasteve does not take them.
I also need the triangular piece next to the right rear jack point (usually rusts our from under the battery tray).
I need the large washer that goes underneath the engine mount. It's about 3" wide and served to keep the engine from shifting too much. Don't know what it's called.
Thanks,
Chris
Posted by: napasteve Nov 24 2015, 02:39 PM
Seat rails/brackets just arrived as advertised. Thanks Jeff.
Posted by: Jerodhelt Nov 24 2015, 04:28 PM
How much for the passengers side upper engine tin, with shipping to Los Angeles?
Posted by: jkuehn Dec 1 2015, 04:40 PM
How much for the passengers side upper engine tin, with shipping to Los Angeles?
Which one specifically, the one that covers the head / pistons?
Posted by: jkuehn Dec 21 2015, 11:27 AM
bump
Posted by: R_u_dd Dec 21 2015, 01:00 PM
I would like the seats and seat back and the rails if Napasteve does not take them.
I also need the triangular piece next to the right rear jack point (usually rusts our from under the battery tray).
I need the large washer that goes underneath the engine mount. It's about 3" wide and served to keep the engine from shifting too much. Don't know what it's called.
Thanks,
Chris
Rails no longer needed. jack point no longer needed. Found my washer.
I need the seat backing and seats if available.
Posted by: rhd914 Dec 29 2015, 01:13 AM
How much for carbon canister shipped to riverside Ca?
Thanks
Posted by: Puebloswatcop Jan 3 2016, 02:12 PM
Do you by any chance have the engine lid grill?
Posted by: 80cap Jan 3 2016, 05:32 PM
I am in need of the letter { c } on the engine grill also the lower sail panel trim for both sides. I also need a front valance.
Thanks Brian
Posted by: cuddyk Jan 3 2016, 08:18 PM
interested in the window channel pieces that hold the fuzzies and squeegees...unless someone else has laid claim already.
Posted by: tygaboy Jan 5 2016, 06:22 PM
I'm working on a custom console and need a tunnel from the floor cross brace forward. I need it intact, in terms of the flange so I can use it to spot weld it back in, as though it was going in as a replacement part.
I'd be happy to take care of the spot welds if you'd be willing to slice out the floor and front section of the body.
Let me know if this is do-able? Thanks,
Chris
Posted by: Dunc Jan 8 2016, 09:10 PM
Blower box and motor?
Posted by: Confused Jan 10 2016, 05:17 PM
Do you still have the front and rear sway bars?
Posted by: audio_file Jan 13 2016, 11:12 AM
Email sent re: passenger mirror
Posted by: getkirk Jan 31 2016, 09:44 AM
I am in need of a pair of heater flap boxes.
Thanks,
Posted by: jdunn Jan 31 2016, 01:07 PM
pm sent for steering box/rack & pinion.
Jack
Posted by: mboss Feb 19 2016, 04:30 PM
Looking for the left engine lid trim piece next to the opening hatch mb912e
Posted by: JOEPROPER Feb 19 2016, 04:54 PM
pm sent...
Posted by: H2OSB Feb 20 2016, 08:04 PM
Do you still have the cylinder heads? If so, are they usable? If yes to both, how much?
Posted by: johnpierre Feb 20 2016, 10:39 PM
jkuehn
I would like the trunk lock and key if possible
thanks johnpierre
Posted by: johnpierre Feb 20 2016, 10:50 PM
email sent...
Posted by: forrestkhaag Feb 23 2016, 11:45 AM
Is the speedo 150mph and for sale at what price to 92651?
thanks
Posted by: BeatNavy Feb 23 2016, 12:31 PM
I'm looking for a couple of the parts listed in the picture below:
1. Link Bearing (#5 in the picture below). Primarily left (driver's) side, but right if you have it as well. I saw those in one of your pictures.
2. Same for plate (#6) below (primarily driver's side)
3. Also could use three hex bolts (# 2) below
Posted by: brooks944 Apr 23 2016, 05:24 AM
Sent a pm on the passengers side door.
Posted by: 396 Apr 23 2016, 08:44 AM
[quote name='BeatNavy' date='Feb 23 2016, 11:31 AM' post='2306865']
I'm looking for a couple of the parts listed in the picture below:
1. Link Bearing (#5 in the picture below). Primarily left (driver's) side, but right if you have it as well. I saw those in one of your pictures.
2. Same for plate (#6) below (primarily driver's side)
3. Also could use three hex bolts (# 2) below
[/quot
If these are not available, try Bruce Stone. He has replated ones . Great vendor too.
Good luck
Posted by: Easyb Apr 26 2016, 09:08 AM
Hi. I'm interested in:
- the Door Locks assembly or internal parts for the passenger side.
- Cylinder drive
ed2111AT GMAIL>COM
Hi. Never heard back about this request? Are the parts still available?
Posted by: MotoJaxx914 Apr 26 2016, 11:43 AM
I am interested in the steering wheel - new to this posting - if you can contact me at mcheckor@brandwagoninc.com
thank you
Posted by: rdauenhauer Apr 26 2016, 01:29 PM
Starts when folks ignore established rules.
Posted by: rdauenhauer Apr 26 2016, 01:35 PM
If these are not available, try Bruce Stone. He has replated ones . Great vendor too.
Good luck
Holy crap ...
How much does Bruce pay you for all of these posts
Posted by: andreic Apr 27 2016, 08:07 AM
I am interested in an outside driver's side door handle. Will send PM.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)