Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB: stock rear springs or....
Posted by: malcolm2 Oct 15 2015, 12:06 PM
I guess I am finally tired of looking at my leaning car. I have measured (not weighed) several times and it is only the drivers rear that is noticeably lower.
Not sure if I need springs or the whole strut. But I should make the change in pairs. The stock springs are the 100 lb ones, right?
If I go with the complete change out, figured I'd get (used) adjustable to replace my KYB of unknown age.
Clark
Posted by: mepstein Oct 15 2015, 12:09 PM
Get boge struts and 100lb springs/pair. I know Pmb has the struts at good prices, may have the springs. You'll like your car so much better when you throw away the kyb's.
Posted by: KevinGieg Oct 15 2015, 01:38 PM
Get boge struts and 100lb springs/pair. I know Pmb has the struts at good prices, may have the springs. You'll like your cat so much better when you throw away the kyb's.
Make sure it's not the lower trailing arm mount it's failing instead of your spring.
Posted by: 396 Oct 15 2015, 03:27 PM
Kyb are only good for moving the car around in the garage.
Posted by: Mblizzard Oct 15 2015, 05:52 PM
Clark I have a good set of springs and KYBs. Come get them.
Posted by: malcolm2 Oct 15 2015, 05:56 PM
Get boge struts and 100lb springs/pair. I know Pmb has the struts at good prices, may have the springs. You'll like your cat so much better when you throw away the kyb's.
Make sure it's not the lower trailing arm mount it's failing instead of your spring.
I believe i am good on them. Both trailing arms have been removed, blasted, painted, re-bearing'd, re bushed with elephant racing rubber (fronts too) and pivot arms.
Even if they are, i agree the KYB should go. But I may need an interim fix.
Mike, i may take u up on it to really see if it straightens up.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)