Printable Version of Topic

Posted by: jim_hoyland Oct 26 2015, 06:33 AM

I need the female connector that goes on the two pin male connector shown in the circle. I'm going to wire it up for the buzzer warning circuit.

The pins are 7 mm apart

***Found one today at Einmalig, a great place for used 911 parts. Bruce, FYI - the part number is 9697


Attached image(s)

Posted by: mepstein Oct 26 2015, 06:41 AM

Maybe try pelican

Posted by: jim_hoyland Oct 26 2015, 08:41 AM

I 'm hoping someone has one in a misc parts box 1st.......

Posted by: euro911 Oct 26 2015, 11:32 AM

... Pelican Classifieds, Jim

Posted by: bdstone914 Oct 26 2015, 12:37 PM

911-613-125-00
Buzzer Switch for Ignition Switch Assymbly, All Models 1985 / 2-88

$12.50 new from Pelican

Posted by: euro911 Oct 26 2015, 01:07 PM

Is that your cost, Bruce?

http://www.pelicanparts.com/More_Info/911-613-125-00-OEM.htm?Buzzer%20Switch

+ ... I think Jim just needs the wiring harness connector for the switch

Posted by: jim_hoyland Oct 26 2015, 03:01 PM

Thanks Bruce; I need the connector that goes onto the switch. The pins are 7 mm apart. I may use a couple of female barrel type connectors, both pins are part of the ground circuit. It would be nice to have a nice push on connector...


Attached image(s)

Posted by: jim_hoyland Oct 27 2015, 01:30 PM

Found one today...


Attached image(s)

Posted by: euro911 Oct 27 2015, 01:33 PM