Looking for a nice hold down plate and bolt for spare tire.
This is what the bolt should look like.
has a 2 3/4 inch threaded portion with winged top.
Attached thumbnail(s)
$20.00 shipped. Pics available tomorrow.
This is for a 914-6 so make sure you get the 3.5" bolt with the butterfly top.
I have a re-plated one if you want to go that route. $40 shipped Bolt is 3"
Attached image(s)
The only other longer bolt I know of is for the 924/944.
You need a 3.5" length bolt to hold down a 5 lug fuch's spare for a 914-6, like this one:
Mike. . the one i pictured above in the original listing that is 2 3/4 inch came out of my 6 and it has plenty of thread to reach. . I'm using the original 14 inch 5.5 Fuchs. .
\not sure why it could use another 3/4 inch length. . maybe for a 15 x 6 inch Fuch ??
Correct, rim face down. .
Bump - still looking for the correct 'butterfly' bolt as picture in the first post.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)