Printable Version of Topic

Posted by: BigFour1973 Feb 3 2016, 05:25 PM

As the title states, Im looking to get some camber shims for my rear trailing arms as i am going to be installing a the ground control adjustable coilover kit to some bilsteins in the near future.

Thank you,
Corey

Posted by: porschetub Feb 3 2016, 10:19 PM

Best to quote sizes,from memory the are 3 or 4.

Posted by: BigFour1973 Feb 3 2016, 11:00 PM

You're right, I believe they are 2,3,4 and 6?mm I'm holding to end up with 4-2mms or 2-4mms

Posted by: The Cabinetmaker Feb 4 2016, 06:08 AM

I have them.

Posted by: bdstone914 Feb 4 2016, 08:44 AM

I have them too in Riverside. Original are 2, 3 and 4mm. If you needs 6mm shims you have other problems. I get $5 each.

Posted by: 396 Feb 4 2016, 10:49 AM

Bruce's parts are top notch.

Posted by: BigFour1973 Feb 4 2016, 03:25 PM

Thank you bruce, I'll keep you in mind. Noel is going to check on some for me this weekend. And if that's not the case I'll take a set from you.
The reason I say potentially 6mm is because I intend to lower the car a decent amount and I don't want over 1 degree of negative camber. I hate the way a 914 looks like from the rear with excessive negative camber.