Printable Version of Topic

Posted by: Larmo63 Feb 19 2016, 06:05 PM

This is a rebuilt 70-71 911 transmission, converted to a 914 side shifter and rebuilt by German Thomas, transaxle specialist. Used pressure plate, ring gear, and expensive special throwout bearing included. Perfect for a /6 conversion, 225mm size clutch for big power. SoCal located, SOLD SOLD SOLD

Posted by: Larmo63 Feb 19 2016, 06:05 PM

Posted by: Larmo63 Feb 19 2016, 06:06 PM

Posted by: Larmo63 Feb 19 2016, 06:08 PM

Posted by: Larmo63 Feb 19 2016, 06:09 PM

Posted by: rgalla9146 Feb 19 2016, 08:30 PM

That's the right way to do it.

Posted by: colingreene Feb 19 2016, 09:43 PM

Not according to Larmo63

Posted by: john77 Feb 20 2016, 01:56 AM

Pm sent

Posted by: Travis Neff Feb 20 2016, 06:03 PM

Nice

Posted by: db9146 Feb 20 2016, 07:15 PM

Just a question to better understand...what's the difference between this trans and a 901 side shifter?

Posted by: Steve Feb 21 2016, 08:12 PM

70 and 71 911 901 is a 225mm pull type clutch versus the 215mm 914 push type clutch. This particular pull type clutch was only used 70-71 with the 2.2 six motors.
Because it was only available for two years the parts are quite expensive. Starting in 72 with the 2.4 six the 911 changed to a 915 gear box with a 225mm pull type clutch.

Posted by: Travis Neff Feb 23 2016, 12:12 AM

Weren't me in the middle of something about this gearbox? Whatevs. Your Friend Travis