Printable Version of Topic

Posted by: euro911 Feb 25 2016, 06:20 PM

Complete running 2.0L with Weber carbs, air filter housing (no element), Bosch dizzy, 911 heat exchangers & banana muffler (with a small, repairable dent/tear).

I purchased this from LarryM when upgraded to a 3.2L in his '69 911. Mark DeBernardi removed the [running] motor from Larry's car and it's been on a stand in my shop ever since. My original plans were to transplant it into my '67 912/6, but I got a respectable offer for the car (as-is), so I sold it, sans the motor. I'll be closing up shop in a couple months, so I'll be posting a bunch of other stuff soon.

I blasted, primed and painted cooling tins too

It didn't come with a flywheel, but I rounded one up and it's included, along with a good clutch disc and pressure plate. I would recommend you buy some new flywheel bolts though.

I'd also recommend readjusting the valves and resealing the motor, and cleaning the carburetors prior to installation - just for peace of mind ... and fresh oil, of course

An assortment of new seals and gaskets are included in the sale.

$8,500. Local pick-up. 'Crate and Freight' extra on buyer's dime ...

Prefer local pick up in Torrance, CA, 90501, but I will gladly coordinate with a shipper of your choice (you get to obtain the quote). Also, I will have to factor in a small charge (actual) for having the motor crated if an enclosed shipping crate is required.

Posted by: ChrisG914 Feb 25 2016, 06:23 PM

Serial number?

Posted by: euro911 Feb 25 2016, 08:06 PM

More ...

Posted by: euro911 Feb 26 2016, 09:51 PM

Pix posted ...

Posted by: Chris H. Feb 29 2016, 03:40 PM

Free for a great deal. Someone buy this so I don't have to look at it.

Don't know this motor personally but everything I've bought and seen of Mark's has been better than described. You can't find a complete, running air cooled 911 engine any more for this price. No external oil cooler required ...hurry...up....

Posted by: euro911 Feb 29 2016, 05:27 PM

Thanks for the kind words, Chris.

This is a special 'Leap Year/Leap Day' offering ... the price is going up an additional $1k tomorrow

Posted by: lonewolfe Feb 29 2016, 05:59 PM

Wish I had the funds. Bad timing for me! This should go quick!

Posted by: forrestkhaag Feb 29 2016, 07:06 PM

Hey Mark: I am at your shop with 4k cash in hand tomorrow. Bing a bill-marker and I will close this deal.

Posted by: euro911 Feb 29 2016, 07:28 PM

I posted on the Samba and getting tons of emails from all over the globe (for the '67 912, '68 big-bore 616 motor and the 911T motor) ... I can't even keep up with it all

I think I priced everything too low

Posted by: 396 Feb 29 2016, 08:18 PM

QUOTE(euro911 @ Feb 29 2016, 05:28 PM)

I posted on the Samba and getting tons of emails from all over the globe (for the '67 912, '68 big-bore 616 motor and the 911T motor) ... I can't even keep up with it all

I think I priced everything too low

Posted by: forrestkhaag Feb 29 2016, 08:20 PM

good on you

Posted by: Chris H. Mar 1 2016, 05:15 PM

Dang Mark you have a lot of stuff. Just nosed through all your Samba ads. I'm no expert but you might be correct - need to do some price adjustments. You are being very generous on the 914 engine...that DTM setup is $1500 itself. That one is EVEN HARDER to pass up than this one!!! A reverse conversion???

The 912 engine (which is ....technically...a 356 engine!!!!) seems cheap too. But I'm sure you bought them at the right prices. That's where you make the $$$.

Posted by: euro911 Mar 2 2016, 03:31 AM

I do believe I am offering the items for fair prices. I try not to price gouge.

... and yes, I did acquire most of the items at under market prices - several years (or more) ago.

No room to store everything with closing up the shop, so I need to part with some gems. The 2056 with the FAT Performance DTM cooling system will sell quickly for $4,500.

Posted by: mepstein Mar 2 2016, 08:49 AM

Have you put this on earlySreg.

Posted by: euro911 Mar 17 2016, 05:59 PM

It's still available. The prospective buyer (some douche in CT) ended up becoming a royal pain in the rear ... wanted me to jump through too many hoops (which I didn't have time for), so I refunded his deposit.

Posted by: euro911 Mar 17 2016, 06:05 PM

Here's some pix of the banana and flywheel (still has a lot of meat on it)






EDITED for Forrest's 'clarity' issue (the flywheel has plenty of metal remaining to resurface it at least 2 ~ 3 more times)

Posted by: forrestkhaag Mar 17 2016, 06:31 PM

What a great deal / cosmetics aside - which is a matter of time and not so much money, this is a very very fair offering. Nice one from Mark!

I just did a tune on my 40IDF's on my 2.2 and is running fantastic.

I just wonder what an additional two barrels would be like to work to balance. The sound has to be worth the effort.

Mark: So is there a Senior Discount on this item if bundled with a bale of Depends ... just for leakage... you said it need to be resealed.... that indicates leakage...

Posted by: forrestkhaag Mar 17 2016, 06:36 PM

you said "meat on it" please clarify: meat on the banana or the flywheel / thanks

Posted by: euro911 Mar 18 2016, 03:06 AM

The flywheel, dummy - sheesh ...

... although, if you get the muffler hot enough, I guess you could cook meat on it

Posted by: euro911 Sep 28 2016, 12:01 AM

BUMP ... Price is good through the +/- Christmas, 2016

Posted by: tangerinetea Oct 17 2016, 01:55 PM

Mark, PM me if you still want to sell he motor...

Posted by: tangerinetea Jan 16 2017, 10:24 AM

Mark, Is the motor still for sale?

Posted by: euro911 Jun 24 2018, 08:26 PM

Bump ...

Yes, it's also listed on Pelican

Posted by: euro911 Sep 9 2021, 12:03 PM

Reduction in price ... $8,500. Local pick up preferred