Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ Parting a 1970
Posted by: Blue6 Mar 14 2016, 08:59 PM
if you need any metal, pm me for close up pics. I know shipping is expensive, so the parts are cheap. Also still has a 1.7 core engine, and a tail shift trans with linkage. 
Posted by: Blue6 Mar 14 2016, 09:00 PM
Posted by: Blue6 Mar 14 2016, 09:01 PM
Posted by: cpavlenko Mar 14 2016, 09:25 PM
if you need any metal, pm me for close up pics. I know shipping is expensive, so the parts are cheap. Also still has a 1.7 core engine, and a tail shift trans with linkage.
Where in socal...
Posted by: Blue6 Mar 14 2016, 09:31 PM
I'm in Brea, north OC. About 15 north of the" happiest place on earth"...
Posted by: Optimusglen Mar 15 2016, 11:43 AM
Interested in the drivers side front fender if it's relatively straight and not too bad in the rust department. shipping would be to 55449.
Posted by: cpavlenko Mar 15 2016, 01:28 PM
I'm in Brea, north OC. About 15 north of the" happiest place on earth"...
Close to were I use to live, Yorba Linda.
Posted by: RobW Mar 15 2016, 01:34 PM
What is the month year of the chassis?
Posted by: 914forme Mar 15 2016, 01:41 PM
I am interested in Windshield A-Pliars Cut at the base and the top. More specifically like this. 
I'll take both sides if that helps.
Shipping to 45241 in reality, I want to see how they where made and gauge of sheet metal and how it compares to say to a 944 coupe. 
Posted by: Blue6 Mar 16 2016, 09:18 AM
Interested in the drivers side front fender if it's relatively straight and not too bad in the rust department. shipping would be to 55449.
I'll go to storage today and check..
What is the month year of the chassis?
I'll check today..
I am interested in Windshield A-Pliars Cut at the base and the top. More specifically like this.
I'll take both sides if that helps.
Shipping to 45241 in reality, I want to see how they where made and gauge of sheet metal and how it compares to say to a 944 coupe.
I'll get som measurements today...
Posted by: tweet Mar 16 2016, 10:51 AM
sending pm
Posted by: gcrotvik Mar 16 2016, 11:04 AM
PM sent.
Posted by: Blue6 Mar 16 2016, 09:59 PM
Pm's returned. Steering column going to Dan (Tweet)
Optimusglen - the fender is junk. Lots of hidden rust and bondo. Not worth shipping costs...
RobW - manufacture date 8/70..
914forme - the A pillars are 26" so that rules out anything USPS has deals on. Without cutting and just guessing the weight, probably $30-$35 shipping at FedEx ground. Let me know..
Posted by: Blue6 Mar 27 2016, 06:29 PM
Plan is to cut this thing up on Wedns. Engine is sold. Trans is out and available. Let me know if you need specific metal...
Posted by: colingreene Mar 28 2016, 09:06 AM
do you still have the threaded rear tow hook mount? I could use that for my car
Posted by: ndfrigi Mar 28 2016, 09:38 AM
Sir Jim took this picture last week when I and Bob dropped the engine. Took less than 2 hrs. spent most of the time removing the heat tins and HE.
thanks Sir Dave and Sir Jim!
Posted by: Blue6 Mar 28 2016, 10:25 AM
do you still have the threaded rear tow hook mount? I could use that for my car
Yes, it's still there. You can come and cut it, or we can cut it and bring it to Bruce's swap...
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)