Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ Need a few 914 parts
Posted by: North Coast Jim Apr 23 2016, 05:43 PM
The World crew has been quite helpful to date. Still looking for the items highlighted in Blue
While Hershey helped to reduce the size of the "Buy List" of parts needed there are still many items required before we can complete Project "Scarecrow". Car is a rust free' 74 2 liter in Bahia Red. Any and all help is requested. Looking for good items none rusted beyond hope. Seen to many of those lately.
Rear Trunk Lock Button
[color=#3366FF]Front Sway Bar and misc hardware
Muffler
Windshield - Clear no tint Glove Box Late[s]Glove Box door hardware - special screws and washers
[s]Rocker Covers and Hardware
[s]Gas Tank Straps both
[s]License Plate lights (2)
[s]Engine Thermostat bellows
Engine firewall pad plastic fasteners
Door aluminum channel at top of window access screws to skin accepts rubber scraperEngine tins especially the two underside captured by push rod tubesValve CoversGear Shift Knob
Posted by: 914Sixer Apr 23 2016, 05:50 PM
I have the gas tank straps. May have late glove box, will have to look.
Posted by: Mr. Olympic Blue 2 You Apr 23 2016, 09:50 PM
I have 2 nice Hella rear License plate lights....sending pm.
Andrew
Posted by: Dion Apr 24 2016, 04:55 PM
I have a thermostat bellows. Used. If it meets your requirements.
Please let me know.
Attached thumbnail(s)
Posted by: Mblizzard Apr 24 2016, 05:11 PM
Got windshield new never installed. What muffler you want? Brush or Monza dual tip?
Posted by: The Cabinetmaker Apr 24 2016, 05:39 PM
I've got trunk lock, aluminum channels, valve covers with bales and a couple gaskets, and engine tins.
Posted by: Yahmann Apr 24 2016, 06:23 PM
I've got a glove box. Very good with strap - see my ad - "parts collection".
Posted by: North Coast Jim Apr 25 2016, 02:53 PM
QUOTE(Mblizzard @ Apr 24 2016, 07:11 PM) 
Got windshield new never installed. What muffler you want? Brush or Monza dual tip?
If it's a new windshield I'm very interested. Is it China Glass or ???? Installed before ?? If so for how long. Let me know. Thanks
North Coast Jim
Posted by: North Coast Jim Apr 25 2016, 02:54 PM
QUOTE(The Cabinetmaker @ Apr 24 2016, 07:39 PM)
I've got trunk lock, aluminum channels, valve covers with bales and a couple gaskets, and engine tins.
Interested in all if in very good condition or better. Pics possible ?? Price ??
Posted by: North Coast Jim Apr 25 2016, 02:58 PM
QUOTE(914Sixer @ Apr 23 2016, 07:50 PM)
I have the gas tank straps. May have late glove box, will have to look.
Good to hear from you again. You sent me the correct Headlight switch some time back. It's in and operational. Thanks again. Interested in the straps and very interested in the late glove box. All I've found are early glove boxes which are too large. Keep me posted. Need prices
Posted by: North Coast Jim Apr 25 2016, 02:58 PM
QUOTE(The Cabinetmaker @ Apr 24 2016, 07:39 PM)
I've got trunk lock, aluminum channels, valve covers with bales and a couple gaskets, and engine tins.
Pics and prices please. I'm interested in all.
Posted by: second wind Apr 25 2016, 03:00 PM
test
Posted by: Mblizzard Apr 25 2016, 05:50 PM
QUOTE(North Coast Jim @ Apr 25 2016, 12:53 PM)
QUOTE(Mblizzard @ Apr 24 2016, 07:11 PM)
Got windshield new never installed. What muffler you want? Brush or Monza dual tip?
If it's a new windshield I'm very interested. Is it China Glass or ???? Installed before ?? If so for how long. Let me know. Thanks
North Coast Jim
New. Pretty sure it is China. Never installed. Ir came from one of the glass vendors here.
Posted by: malcolm2 Apr 25 2016, 09:17 PM
QUOTE(North Coast Jim @ Apr 23 2016, 06:43 PM)
While Hershey helped to reduce the size of the "Buy List" of parts needed there are still many items required before we can complete Project "Scarecrow". Car is a rust free' 74 2 liter in Bahia Red. Any and all help is requested. Looking for good items none rusted beyond hope. Seen to many of those lately.
1. Rear Trunk Lock Button
Front Sway Bar and misc hardware
Muffler
2. Winsdhield - Clear no tint
Glove Box Late
3. Glove Box door hardware - special screws and washers
Rocker Covers and Hardware
4. Gas Tank Straps both
License Plate lights (2)
5. Engine Thermostat bellows
Engine firewall pad plastic fasteners
6.Door aluminum channel at top of window access screws to skin accepts rubber scraper
7. Engine tins especially the two underside captured by push rod tubes
8. Valve Covers
9. Gear Shift Knob
Strike thru what you gleaned from the initial post and I will look in the pile of stuff from a 71.
From memory, the numbered stuff is probably in the pile... #2 is the glass Blizzard mentioned, not sure if it is tinted, have to check. It is brand new, the rest will be graded low to very low quality. #9 is not readable. The tins and straps can be easily cleaned up.
Posted by: The Cabinetmaker Apr 26 2016, 05:39 AM
QUOTE(North Coast Jim @ Apr 25 2016, 03:58 PM)
QUOTE(The Cabinetmaker @ Apr 24 2016, 07:39 PM)
I've got trunk lock, aluminum channels, valve covers with bales and a couple gaskets, and engine tins.
Pics and prices please. I'm interested in all.
I will try to get pics today today. More specific pieces on the tin please. I have a dozen of the lower cylinder tins
Posted by: malcolm2 Apr 28 2016, 11:59 AM
The windshield Blizzard mentioned was MADE IN CHINA and it is not tinted. Never installed. $150 plus shipping.
Posted by: North Coast Jim Apr 28 2016, 12:15 PM
QUOTE(malcolm2 @ Apr 28 2016, 01:59 PM)
The windshield Blizzard mentioned was MADE IN CHINA and it is not tinted. Never installed. $150 plus shipping.
Interested. Too far to drive so how does shipping work ?? Ship in the same packaging as you received it or ??? Can you guarantee it will arrive in one piece ??
Posted by: malcolm2 Apr 28 2016, 12:40 PM
QUOTE(North Coast Jim @ Apr 28 2016, 01:15 PM)
QUOTE(malcolm2 @ Apr 28 2016, 01:59 PM)
The windshield Blizzard mentioned was MADE IN CHINA and it is not tinted. Never installed. $150 plus shipping.
Interested. Too far to drive so how does shipping work ?? Ship in the same packaging as you received it or ??? Can you guarantee it will arrive in one piece ??
I don't have a box. The PO picked it up at a Nashville warehouse. I can come up with a box. UPS will insure for value up to $100 at no charge. I will get all the particulars and get back with you. I'll get $ with extra insurance and without and let you know.
Posted by: Mikey914 May 1 2016, 09:42 AM
I've got #6 the aluminum part on the exterior of the door, even the fuzzies that go in them. I'll ge them on the site this next week. The early and late are different, Mainly because of the door end cap. So, you will need to confirm which you need,
Posted by: rhodyguy May 1 2016, 02:03 PM
Purchase the correct end caps when you order the scrapper channel. New scrapers too.
Posted by: 914bub May 1 2016, 03:26 PM
QUOTE(North Coast Jim @ Apr 23 2016, 04:43 PM)
[/s]Gear Shift Knob
914rubber
Posted by: North Coast Jim May 13 2016, 06:08 AM
QUOTE(Mblizzard @ Apr 25 2016, 07:50 PM)
QUOTE(North Coast Jim @ Apr 25 2016, 12:53 PM)
QUOTE(Mblizzard @ Apr 24 2016, 07:11 PM)
Got windshield new never installed. What muffler you want? Brush or Monza dual tip?
If it's a new windshield I'm very interested. Is it China Glass or ???? Installed before ?? If so for how long. Let me know. Thanks
North Coast Jim
New. Pretty sure it is China. Never installed. Ir came from one of the glass vendors here.
Seems this request got lost with some correspondence with Malcom. I'm interested in the windshield. Need shipping costs from Nashville area to Port Clinton Ohio.
Posted by: North Coast Jim May 13 2016, 06:11 AM
QUOTE(North Coast Jim @ Apr 25 2016, 04:54 PM)
QUOTE(The Cabinetmaker @ Apr 24 2016, 07:39 PM)
I've got trunk lock, aluminum channels, valve covers with bales and a couple gaskets, and engine tins.
Interested in all if in very good condition or better. Pics possible ?? Price ??
Received your package. Tins and valve covers are now in for paint. Thanks.
Still interested in a good trunk lock - one with pits in the chrome. Also would like the aluminum door channels. Have these ?? If so what is cost ??
Posted by: ericoneal May 13 2016, 07:18 AM
http://www.914world.com/bbs2/index.php?showtopic=209088&st=0&p=1856105&#entry1856105
QUOTE(North Coast Jim @ Apr 23 2016, 07:43 PM)
The World crew has been quite helpful to date. Still looking for the items highlighted in Blue
While Hershey helped to reduce the size of the "Buy List" of parts needed there are still many items required before we can complete Project "Scarecrow". Car is a rust free' 74 2 liter in Bahia Red. Any and all help is requested. Looking for good items none rusted beyond hope. Seen to many of those lately.
Rear Trunk Lock Button
[color=#3366FF]Front Sway Bar and misc hardware
Muffler
Windshield - Clear no tint
[s]Rocker Covers and Hardware
[s]Gas Tank Straps both
[s]License Plate lights (2)
[s]Engine Thermostat bellows
Engine firewall pad plastic fasteners
Door aluminum channel at top of window access screws to skin accepts rubber scraper
Posted by: malcolm2 May 13 2016, 07:42 AM
QUOTE(North Coast Jim @ May 13 2016, 07:08 AM)
QUOTE(Mblizzard @ Apr 25 2016, 07:50 PM)
QUOTE(North Coast Jim @ Apr 25 2016, 12:53 PM)
QUOTE(Mblizzard @ Apr 24 2016, 07:11 PM)
Got windshield new never installed. What muffler you want? Brush or Monza dual tip?
If it's a new windshield I'm very interested. Is it China Glass or ???? Installed before ?? If so for how long. Let me know. Thanks
North Coast Jim
New. Pretty sure it is China. Never installed. Ir came from one of the glass vendors here.
Seems this request got lost with some correspondence with Malcom. I'm interested in the windshield. Need shipping costs from Nashville area to Port Clinton Ohio.
Hey, Yes I dropped the ball. UPS now charges via dimensional-weight so being a large box, the payment is based on max weight of that size box. So the UPS website is saying the shipping will be $150 for a box with approx dimensions of 60 x 36 x 10
Yes made in China and no tint on the top edge.
Sorry,
Clark
Posted by: roadsportusa May 13 2016, 12:38 PM
QUOTE(rhodyguy @ May 1 2016, 04:03 PM)
Purchase the correct end caps when you order the scrapper channel. New scrapers too.
I have a used winDshield, no tint, out of 1973 914 with glue on mirror and chrome trim
$95, located near Philly, Pa.
call Ron
cell267-230-8579
Posted by: North Coast Jim May 14 2016, 06:42 AM
QUOTE(roadsportusa @ May 13 2016, 02:38 PM)
QUOTE(rhodyguy @ May 1 2016, 04:03 PM)
Purchase the correct end caps when you order the scrapper channel. New scrapers too.
I have a used winDshield, no tint, out of 1973 914 with glue on mirror and chrome trim
$95, located near Philly, Pa.
call Ron
cell267-230-8579
Looking for me but thanks anyway
Posted by: Evil914 May 15 2016, 10:27 PM
From the looks of the windshield decals AGC is in Ohio 
Posted by: North Coast Jim Jun 3 2016, 06:57 AM
QUOTE(roadsportusa @ May 13 2016, 02:38 PM)
QUOTE(rhodyguy @ May 1 2016, 04:03 PM)
Purchase the correct end caps when you order the scrapper channel. New scrapers too.
I have a used winDshield, no tint, out of 1973 914 with glue on mirror and chrome trim
$95, located near Philly, Pa.
call Ron
cell267-230-8579
Thanks for the input but decided to purchase new. Found one 20 miles from my Mom's house in Painesville Ohio. Save the shipping cost too.
Posted by: North Coast Jim Jun 3 2016, 07:00 AM
QUOTE(malcolm2 @ May 13 2016, 09:42 AM)
QUOTE(North Coast Jim @ May 13 2016, 07:08 AM)
QUOTE(Mblizzard @ Apr 25 2016, 07:50 PM)
QUOTE(North Coast Jim @ Apr 25 2016, 12:53 PM)
QUOTE(Mblizzard @ Apr 24 2016, 07:11 PM)
Got windshield new never installed. What muffler you want? Brush or Monza dual tip?
If it's a new windshield I'm very interested. Is it China Glass or ???? Installed before ?? If so for how long. Let me know. Thanks
North Coast Jim
New. Pretty sure it is China. Never installed. Ir came from one of the glass vendors here.
Seems this request got lost with some correspondence with Malcom. I'm interested in the windshield. Need shipping costs from Nashville area to Port Clinton Ohio.
Hey, Yes I dropped the ball. UPS now charges via dimensional-weight so being a large box, the payment is based on max weight of that size box. So the UPS website is saying the shipping will be $150 for a box with approx dimensions of 60 x 36 x 10
Yes made in China and no tint on the top edge.
Sorry,
Clark
Sorry it took so long but we have been pondering a trip down to Nashville to pick this glass up from you. In the meantime I found new glass, China of course, 20 miles from my Mom's house in Painesville, Ohio. I can pick it up and save the shipping costs. Going that way instead. Thanks again
Posted by: Montreal914 Jun 4 2016, 11:39 AM
Shifter knob;
Got this one from Sierra Madre Collection for $12! 
At this price, I had to buy it. Since they are close to me I picked it up and didn't pay shipping.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)