Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ Lots of Stuff....(last day)
Posted by: Tbone425 May 19 2016, 07:51 PM
***leaving until end of July*** last day I will be shipping anything is Thurs.
more pics at
http://forums.pelicanparts.com/porsche-914-used-parts-sale-wanted/915024-76-914-part-out.html
2.0L GD code motor. Will part in Aug after I tear it down and see what I have.
Perforated metal pedal board $50 shipped.
A/C compressor and parts. No idea of functionality. Only have what's pictured, $60 plus shipping
Pedal cluster, new pads and brass bushings, looks to be rebuilt maybe not used since. $100
1.8 Engine tin, very nice set cleaned and ready, little surface here and there. Most rubber and covers intact and nice. $175 shipped
Cooling Shroud and Fan Dirty but nice, Ill get it cleaned up and post a better pic, Alt not included and Alt tin goes with above set. $150 shipped
Wing window set Outstanding rubber, chrome and glass, very nice units. $75 /Set
Dizzy, Spins free unsure of condition though, visually nice unit $25
Dash Bottom Pad with Stainless trim. Includes vents Very presentable. Couple cracks. $50 PLUS actual shipping.
Headlight Motors Will remove and test in my car $40 each or $125 for all light hardware buckets, small bumper to light trim and all Mounting hardware.
Stainless Rockers. Look great. $75 pair plus shipping.
Original rockers, little dinged up here ant there, some surface rust still very viable and restorable, or shoot satin black and drive $50 plus shipping
Alt and 2 Starters (Bosch) all tested and working $50 Each
Door Glass $40 ea Plus Shipping
Heater Controls $30
Tach and Speedo Unsure of functionality black faces $50 for both.
Very nice Horn Pad 901 part number, very nice small chips in paint around corners of ring Pad is great. $50
Ash Tray Looks to be lightly used, Ill clean it up. Very nice though $15
very clean from bumper top broken stud on end. Not rusted or torn out just snapped $50 plus shipping.
More pics on pelicanparts
Everything should be priced very fair considering packaging, Buyer pays PP fees if not sent as friend.Let me know if I’m out of line one anything. Also let me know if ther is something you need that is not listed...I have three cars with of stuff right now. Discounts for local pick-up. Will start posting some pics tonight.
Posted by: tweet May 19 2016, 07:58 PM
I'll take the lock set, sun visors also, thanks
Posted by: Tbone425 May 19 2016, 08:10 PM
QUOTE(tweet @ May 19 2016, 06:58 PM) 
I'll take the lock set, sun visors also, thanks
All yours! PP is cataylor100@gmail.com Shoot me your email and I will send you a pic of it all before I ship it out to you.
Thanks!
Posted by: tweet May 19 2016, 08:20 PM
QUOTE(Tbone425 @ May 19 2016, 10:10 PM)
QUOTE(tweet @ May 19 2016, 06:58 PM)
I'll take the lock set, sun visors also, thanks
All yours! PP is cataylor100@gmail.com Shoot me your email and I will send you a pic of it all before I ship it out to you.
Thanks!
pm sent
Posted by: bdstone914 May 19 2016, 08:38 PM
What engine is the dizzy from? 1.8 is a unique distributor. But since you say a 1976 then is it a D Jet dizzy. Pictures would help.
Posted by: Tbone425 May 19 2016, 08:46 PM
QUOTE(bdstone914 @ May 19 2016, 07:38 PM)
What engine is the dizzy from? 1.8 is a unique distributor. But since you say a 1976 then is it a D Jet dizzy. Pictures would help.
Should be from the 1.8 Its a Bosch JFRA 9 230 081 050, if that helps. I will get pics up tonight. I have some on my phone if you want to send me your email or number I can txt you at I can send them now.
Thanks,
Chris
Posted by: Tbone425 May 20 2016, 01:25 AM
Attached image(s)
Posted by: Tbone425 May 20 2016, 01:28 AM
What your are seeing is 20 years of dust...
Posted by: JOEPROPER May 20 2016, 06:46 AM
Can you post pictures of the targa top? I'm interested if it's really nice. Thanks
Posted by: JOEPROPER May 20 2016, 06:46 AM
QUOTE(JOEPROPER @ May 20 2016, 08:46 AM)
Can you post pictures of the targa top? I'm interested if it's really nice. Thanks
Also, sail trim...
Posted by: jwinner May 20 2016, 06:53 AM
QUOTE(Tbone425 @ May 19 2016, 08:51 PM)
Parts, parts and more parts…Risking life and limb from my wife, I (again) bought a roller to get some bits I needed including a side-shifter trans. It has been off the road for nearly 2 decades, but under cover. Hope its organs can help other teeners live on (shot drivers lateral and inner pass well. But might provide some other good sheet in the hole). Some really nice stuff. All prices include shipping and PP fees unless it states shipping not included. This is only on the big stuff. Glass will be packed in uhaul mirror boxes after being wrapped and braced w/cardboard. Shipping is from 85297 and my pricing is usually slightly better than FedEx website through my company. Let me know if there is anything you are looking for if its not listed. No engine. I have sent and recieved doors and bumpers through greyhound a number of times as well.
1.8 Engine tin, nice set cleaned and ready, little surface here and there. Most rubber and covers intact and nice. $150
Cooling Shroud and Fan Dirty but nice, Ill get it cleaned up and post a better pic, Alt not included and Alt tin goes with above set. $150
Wing window set Outstanding rubber, chrome and glass, very nice units. $100/Set
Rear Lights Lense (1) and Buckets. Buckets are decent, Pass lens is broken can include if wanted. $40
Dizzy Spins free unsure of condition though, visually nice unit $25
Dash Bottom Pad with Stainless trim. Includes vents Very presentable. Some small cracks from the bottom fastener holes back, should not be visible when mounted. $60 PLUS actual shipping.
Headlight Motors Will remove and test in my car $40 each or $125 for all light hardware buckets, small bumper to light trim and all Mounting hardware.
Targa Top Nice liner and shell rubber is rough. All latches. I had though about using it to hard mount a bike rack to, zero room in my garage for those shenanigans though $75 Plus shipping. Ill pack it in a uhaul art box.
Side Rockers. Look great. Will pull to check condition tonight. From what I can see looks to bee some surface but otherwise solid. $85 Pair
NEW Jack receiver plates. Unused, in primer still $20 Pair
Alt and 2 Starters (Bosch) Will have each tested in the AM $50 Each
Rear Glass Very Nice $75 Pus Shipping. uhaul art box
Door Glass $40 ea Plus Shipping
Clear Windshield and Chrome Molding The glass has a couple very slight pits, but no stars or cracks, VERY nice as is the Chrome molding. Bottom corner pieces could uses some gentle shaping with the eraser end of a pencil but very presentable still. $150 Plus Shipping will pack very well. Will separate.
Heater Controls $30
SOLD PENDING***Outer Door handles, Ignition switch, front trunk handle and rear hood buttom, Keys and one black OEM 914 key new in bag. $100
Tach and Speedo Unsure of functionality $50
Very nice Horn Pad 901 part number, very nice small chips in paint around corners of ring Pad is great. $60
Side door ding Moldings set. $35
Ash Tray Looks to be lightly used, Ill clean it up. Very nice though $15
Metal Front Valance Some dents around arm mounts, some surface rust. 4 of 10. $45 plus shipping
Rear Bumper Painted black, Top rubber strip is rough but intact. Bumperettes are slightly better. Includes struts. $60 plus shipping.
Door panels with arm rests and pocket. Very nice and presentable. Top of Pass door has some very small hairline splits on just the top roll. Nice functioning pocket lid on drivers door. Panels are black basket weave texture. $80 gets it all.
Side shifter couplers and tubes. Knob on shifter is an old Wooden one, shifter and tubes are nice. Will require the engine mount bar if going from a tail shift. Trans not for sale. $75
SOLD PENDING***Black Sun Visors Presentable, not split or faded $25 Pair
Hella front Turn Buckets (No lenses) Nice clean units, $25 Pair
Wiper Motor and Mech. Can included arms $50
Wash Bottle $20
Brake Reservoir $20
Gas Tank *Inquire. Nice tank and Cap can have boiled out local cheap
Tank Strap $20
Everything should be priced very fair considering packaging, PP fees I will be covering and shipping on most items. But let me know if I’m out of line one anything. Also let me know if ther is something you need that is not listed. The car is very straight with some great metal. Discounts for local pick-up. Will start posting some pics tonight.
Thanks Folks!
PM sent for door panels. Thanks.
Posted by: malcolm2 May 20 2016, 11:47 AM
Didn't see a targa pad listed. The 1/2 round pad that is on the targa bar just above the seats. The rear roof latches go thru it. do you have, are you using?
Like this one....
Posted by: Tbone425 May 20 2016, 12:14 PM
QUOTE(JOEPROPER @ May 20 2016, 05:46 AM)
QUOTE(JOEPROPER @ May 20 2016, 08:46 AM)
Can you post pictures of the targa top? I'm interested if it's really nice. Thanks
Also, sail trim...
Posted by: Tbone425 May 20 2016, 12:17 PM
QUOTE(jwinner @ May 20 2016, 05:53 AM)
QUOTE(Tbone425 @ May 19 2016, 08:51 PM)
Parts, parts and more parts…Risking life and limb from my wife, I (again) bought a roller to get some bits I needed including a side-shifter trans. It has been off the road for nearly 2 decades, but under cover. Hope its organs can help other teeners live on (shot drivers lateral and inner pass well. But might provide some other good sheet in the hole). Some really nice stuff. All prices include shipping and PP fees unless it states shipping not included. This is only on the big stuff. Glass will be packed in uhaul mirror boxes after being wrapped and braced w/cardboard. Shipping is from 85297 and my pricing is usually slightly better than FedEx website through my company. Let me know if there is anything you are looking for if its not listed. No engine. I have sent and recieved doors and bumpers through greyhound a number of times as well.
1.8 Engine tin, nice set cleaned and ready, little surface here and there. Most rubber and covers intact and nice. $150
Cooling Shroud and Fan Dirty but nice, Ill get it cleaned up and post a better pic, Alt not included and Alt tin goes with above set. $150
Wing window set Outstanding rubber, chrome and glass, very nice units. $100/Set
Rear Lights Lense (1) and Buckets. Buckets are decent, Pass lens is broken can include if wanted. $40
Dizzy Spins free unsure of condition though, visually nice unit $25
Dash Bottom Pad with Stainless trim. Includes vents Very presentable. Some small cracks from the bottom fastener holes back, should not be visible when mounted. $60 PLUS actual shipping.
Headlight Motors Will remove and test in my car $40 each or $125 for all light hardware buckets, small bumper to light trim and all Mounting hardware.
Targa Top Nice liner and shell rubber is rough. All latches. I had though about using it to hard mount a bike rack to, zero room in my garage for those shenanigans though $75 Plus shipping. Ill pack it in a uhaul art box.
Side Rockers. Look great. Will pull to check condition tonight. From what I can see looks to bee some surface but otherwise solid. $85 Pair
NEW Jack receiver plates. Unused, in primer still $20 Pair
Alt and 2 Starters (Bosch) Will have each tested in the AM $50 Each
Rear Glass Very Nice $75 Pus Shipping. uhaul art box
Door Glass $40 ea Plus Shipping
Clear Windshield and Chrome Molding The glass has a couple very slight pits, but no stars or cracks, VERY nice as is the Chrome molding. Bottom corner pieces could uses some gentle shaping with the eraser end of a pencil but very presentable still. $150 Plus Shipping will pack very well. Will separate.
Heater Controls $30
SOLD PENDING***Outer Door handles, Ignition switch, front trunk handle and rear hood buttom, Keys and one black OEM 914 key new in bag. $100
Tach and Speedo Unsure of functionality $50
Very nice Horn Pad 901 part number, very nice small chips in paint around corners of ring Pad is great. $60
Side door ding Moldings set. $35
Ash Tray Looks to be lightly used, Ill clean it up. Very nice though $15
Metal Front Valance Some dents around arm mounts, some surface rust. 4 of 10. $45 plus shipping
Rear Bumper Painted black, Top rubber strip is rough but intact. Bumperettes are slightly better. Includes struts. $60 plus shipping.
Door panels with arm rests and pocket. Very nice and presentable. Top of Pass door has some very small hairline splits on just the top roll. Nice functioning pocket lid on drivers door. Panels are black basket weave texture. $80 gets it all.
Side shifter couplers and tubes. Knob on shifter is an old Wooden one, shifter and tubes are nice. Will require the engine mount bar if going from a tail shift. Trans not for sale. $75
SOLD PENDING***Black Sun Visors Presentable, not split or faded $25 Pair
Hella front Turn Buckets (No lenses) Nice clean units, $25 Pair
Wiper Motor and Mech. Can included arms $50
Wash Bottle $20
Brake Reservoir $20
Gas Tank *Inquire. Nice tank and Cap can have boiled out local cheap
Tank Strap $20
Everything should be priced very fair considering packaging, PP fees I will be covering and shipping on most items. But let me know if I’m out of line one anything. Also let me know if ther is something you need that is not listed. The car is very straight with some great metal. Discounts for local pick-up. Will start posting some pics tonight.
Thanks Folks!
PM sent for door panels. Thanks.
Warm water only. These things are nice. Wish they were right for my car.
Posted by: JOEPROPER May 20 2016, 12:30 PM
QUOTE(Tbone425 @ May 20 2016, 02:14 PM)
QUOTE(JOEPROPER @ May 20 2016, 05:46 AM)
QUOTE(JOEPROPER @ May 20 2016, 08:46 AM)
Can you post pictures of the targa top? I'm interested if it's really nice. Thanks
Also, sail trim...
I can't tell, is there RED on the targa top?
Posted by: Menmojo May 20 2016, 12:41 PM
2nd in line for the targa top! I don't care if it has some red on it. I'll take it as is.
I'll take it if Joe takes a pass.
PM sent
Posted by: Tbone425 May 20 2016, 02:28 PM
QUOTE(malcolm2 @ May 20 2016, 10:47 AM)
Didn't see a targa pad listed. The 1/2 round pad that is on the targa bar just above the seats. The rear roof latches go thru it. do you have, are you using?
Like this one....
I didn't list it due to cracks, like the dash. I had considered recovering it, the pillars and the dash as a hobby project. It's complete, just has cracks. Think of an offer, then knock $10 bucks off it and it yours LOL. I can send a pic as well.
Posted by: Tbone425 May 20 2016, 03:56 PM
QUOTE(Tbone425 @ May 20 2016, 01:28 PM)
QUOTE(malcolm2 @ May 20 2016, 10:47 AM)
Didn't see a targa pad listed. The 1/2 round pad that is on the targa bar just above the seats. The rear roof latches go thru it. do you have, are you using?
Like this one....
I didn't list it due to cracks, like the dash. I had considered recovering it, the pillars and the dash as a hobby project. It's complete, just has cracks. Think of an offer, then knock $10 bucks off it and it yours LOL. I can send a pic as well.
Attached image(s)
Posted by: Tbone425 May 20 2016, 04:16 PM
QUOTE(JOEPROPER @ May 20 2016, 05:46 AM)
Can you post pictures of the targa top? I'm interested if it's really nice. Thanks
You have a PM. I'll just throw in the sail trim I have (back top, pass side strip and trailing edge)
Chris
Posted by: tweet May 21 2016, 08:20 AM
pm sent
Posted by: Robin914-4 May 21 2016, 11:23 AM
I am looking for the air director flaps that mount to the engine and direct air over the cylinders based on that goofy thermostat mounted to the side of the block. Do you have these? I really could use it all but the flaps would be a great start.
Robin
Posted by: Tbone425 May 21 2016, 12:10 PM
QUOTE(Robin914-4 @ May 21 2016, 10:23 AM)
I am looking for the air director flaps that mount to the engine and direct air over the cylinders based on that goofy thermostat mounted to the side of the block. Do you have these? I really could use it all but the flaps would be a great start.
Robin
Is it the T shaped (sort of) tins? I might have them in another box, I still have boxes of 1.8 stuff from my last 100 pound purchase to get 1 pound adventure. Do you have a pic?
Thanks,
Chris
Posted by: 914Sixer May 21 2016, 12:28 PM
Your car is NOT a 76. Look at the serial number on door post. It is a 73 or 74 going by the bumpers and no fuel pump mount in the front trunk.
Posted by: Tbone425 May 21 2016, 01:09 PM
QUOTE(914Sixer @ May 21 2016, 11:28 AM)
Your car is NOT a 76. Look at the serial number on door post. It is a 73 or 74 going by the bumpers and no fuel pump mount in the front trunk.
Correct. My bad, 1974. Should not pose an issue for any of the parts gone so far though. Will correct. Good eye, thanks!
Posted by: tweet May 21 2016, 06:52 PM
pp sent, thanks.
Posted by: johnpierre May 21 2016, 10:53 PM
hey Tbone425
maybe i will get lucky this time. I need the truck lock button if it is still around.
pm me if you do and i will immediately paypal (or how every much indicate) you the money.
-jp-
Posted by: Tbone425 May 21 2016, 11:19 PM
QUOTE(johnpierre @ May 21 2016, 09:53 PM)
hey Tbone425
maybe i will get lucky this time. I need the truck lock button if it is still around.
pm me if you do and i will immediately paypal (or how every much indicate) you the money.
-jp-
Sorry man 'tweet' laid claim to the full set of locks. You might be able to work something out with him though. Maybe he has a current one he could hook you up with.
Posted by: Tbone425 May 21 2016, 11:36 PM
QUOTE(Tbone425 @ May 19 2016, 06:51 PM)
Parts, parts and more parts…Risking life and limb from my wife, I (again) bought a roller to get some bits I needed including a side-shifter trans. It has been off the road for nearly 2 decades, but under cover. Hope its organs can help other teeners live on (shot drivers lateral and inner pass well. But might provide some other good sheet in the hole). Some really nice stuff. All prices include shipping and PP fees unless it states shipping not included. This is only on the big stuff. Glass will be packed in uhaul mirror boxes after being wrapped and braced w/cardboard. Shipping is from 85297 and my pricing is usually slightly better than FedEx website through my company. Let me know if there is anything you are looking for if its not listed. No engine. I have sent and recieved doors and bumpers through greyhound a number of times as well.
1.8 Engine tin, nice set cleaned and ready, little surface here and there. Most rubber and covers intact and nice. $150
Cooling Shroud and Fan Dirty but nice, Ill get it cleaned up and post a better pic, Alt not included and Alt tin goes with above set. $150
Wing window set Outstanding rubber, chrome and glass, very nice units. $100/Set
Rear Lights Lense (1) and Buckets. Buckets are decent, Pass lens is broken can include if wanted. $40
Dizzy Spins free unsure of condition though, visually nice unit $25
Dash Bottom Pad with Stainless trim. Includes vents Very presentable. Some small cracks from the bottom fastener holes back, should not be visible when mounted. $60 PLUS actual shipping.
Headlight Motors Will remove and test in my car $40 each or $125 for all light hardware buckets, small bumper to light trim and all Mounting hardware.
SOLD Pending****Targa Top Nice liner and shell rubber is rough. All latches. I had though about using it to hard mount a bike rack to, zero room in my garage for those shenanigans though $75 Plus shipping. Ill pack it in a uhaul art box.
Side Rockers. Look great. Will pull to check condition tonight. From what I can see looks to bee some surface but otherwise solid. $85 Pair
NEW Jack receiver plates. Unused, in primer still $20 Pair
Alt and 2 Starters (Bosch) Will have each tested in the AM $50 Each
Rear Glass Very Nice $75 Pus Shipping. uhaul art box
Door Glass $40 ea Plus Shipping
Clear Windshield and Chrome Molding The glass has a couple very slight pits, but no stars or cracks, VERY nice as is the Chrome molding. Bottom corner pieces could uses some gentle shaping with the eraser end of a pencil but very presentable still. $150 Plus Shipping will pack very well. Will separate.
Heater Controls $30
SOLD PENDING***Outer Door handles, Ignition switch, front trunk handle and rear hood buttom, Keys and one black OEM 914 key new in bag. $100
Tach and Speedo Unsure of functionality $50
Very nice Horn Pad 901 part number, very nice small chips in paint around corners of ring Pad is great. $60
Side door ding Moldings set. $35
Ash Tray Looks to be lightly used, Ill clean it up. Very nice though $15
Metal Front Valance Some dents around arm mounts, some surface rust. 4 of 10. $45 plus shipping
Rear Bumper Painted black, Top rubber strip is rough but intact. Bumperettes are slightly better. Includes struts. $60 plus shipping.
Door panels with arm rests and pocket. Very nice and presentable. Top of Pass door has some very small hairline splits on just the top roll. Nice functioning pocket lid on drivers door. Panels are black basket weave texture. $80 gets it all.
Side shifter couplers and tubes. Knob on shifter is an old Wooden one, shifter and tubes are nice. Will require the engine mount bar if going from a tail shift. Trans not for sale. $75
SOLD PENDING***Black Sun Visors Presentable, not split or faded $25 Pair
Hella front Turn Buckets (No lenses) Nice clean units, $25 Pair
Wiper Motor and Mech. Can included arms $50
Wash Bottle $20
Brake Reservoir $20
Gas Tank *Inquire. Nice tank and Cap can have boiled out local cheap
Tank Strap $20
Original Ski rack! Kind of a cool nostalgia piece. Stainless has original padlock...but no key. Little dirty but should clean up well. This fits the factory mount holes on the underside of the roll bar and slot in the header. $60 shipped[attachmentid=556053][attachmentid=556053]
Everything should be priced very fair considering packaging, PP fees I will be covering and shipping on most items. But let me know if I’m out of line one anything. Also let me know if ther is something you need that is not listed. The car is very straight with some great metal. Discounts for local pick-up. Will start posting some pics tonight.
Thanks Folks!
Rockers are stainless.
Attached thumbnail(s)
Posted by: liebe May 22 2016, 07:31 AM
QUOTE(Tbone425 @ May 20 2016, 09:25 AM)
I will take all of the Engine tin if available, all located on the pic, 4 down.
Please send me total, 77079 shipping
And paypal, thank you
Posted by: lcjo73914 May 22 2016, 08:36 AM
QUOTE(Tbone425 @ May 19 2016, 06:51 PM)
Parts, parts and more parts…Risking life and limb from my wife, I (again) bought a roller to get some bits I needed including a side-shifter trans. It has been off the road for nearly 2 decades, but under cover. Hope its organs can help other teeners live on (shot drivers lateral and inner pass well. But might provide some other good sheet in the hole). Some really nice stuff. All prices include shipping and PP fees unless it states shipping not included. This is only on the big stuff. Glass will be packed in uhaul mirror boxes after being wrapped and braced w/cardboard. Shipping is from 85297 and my pricing is usually slightly better than FedEx website through my company. Let me know if there is anything you are looking for if its not listed. No engine. I have sent and recieved doors and bumpers through greyhound a number of times as well.
1.8 Engine tin, nice set cleaned and ready, little surface here and there. Most rubber and covers intact and nice. $150
Cooling Shroud and Fan Dirty but nice, Ill get it cleaned up and post a better pic, Alt not included and Alt tin goes with above set. $150
Wing window set Outstanding rubber, chrome and glass, very nice units. $100/Set
Rear Lights Lense (1) and Buckets. Buckets are decent, Pass lens is broken can include if wanted. $40
Dizzy Spins free unsure of condition though, visually nice unit $25
Dash Bottom Pad with Stainless trim. Includes vents Very presentable. Some small cracks from the bottom fastener holes back, should not be visible when mounted. $60 PLUS actual shipping.
Headlight Motors Will remove and test in my car $40 each or $125 for all light hardware buckets, small bumper to light trim and all Mounting hardware.
SOLD Pending****Targa Top Nice liner and shell rubber is rough. All latches. I had though about using it to hard mount a bike rack to, zero room in my garage for those shenanigans though $75 Plus shipping. Ill pack it in a uhaul art box.
Side Rockers. Look great. Will pull to check condition tonight. From what I can see looks to bee some surface but otherwise solid. $85 Pair
NEW Jack receiver plates. Unused, in primer still $20 Pair
Alt and 2 Starters (Bosch) Will have each tested in the AM $50 Each
Rear Glass Very Nice $75 Pus Shipping. uhaul art box
Door Glass $40 ea Plus Shipping
Clear Windshield and Chrome Molding The glass has a couple very slight pits, but no stars or cracks, VERY nice as is the Chrome molding. Bottom corner pieces could uses some gentle shaping with the eraser end of a pencil but very presentable still. $150 Plus Shipping will pack very well. Will separate.
Heater Controls $30
SOLD PENDING***Outer Door handles, Ignition switch, front trunk handle and rear hood buttom, Keys and one black OEM 914 key new in bag. $100
Tach and Speedo Unsure of functionality $50
Very nice Horn Pad 901 part number, very nice small chips in paint around corners of ring Pad is great. $60
Side door ding Moldings set. $35
Ash Tray Looks to be lightly used, Ill clean it up. Very nice though $15
Metal Front Valance Some dents around arm mounts, some surface rust. 4 of 10. $45 plus shipping
Rear Bumper Painted black, Top rubber strip is rough but intact. Bumperettes are slightly better. Includes struts. $60 plus shipping.
Door panels with arm rests and pocket. Very nice and presentable. Top of Pass door has some very small hairline splits on just the top roll. Nice functioning pocket lid on drivers door. Panels are black basket weave texture. $80 gets it all.
Side shifter couplers and tubes. Knob on shifter is an old Wooden one, shifter and tubes are nice. Will require the engine mount bar if going from a tail shift. Trans not for sale. $75
SOLD PENDING***Black Sun Visors Presentable, not split or faded $25 Pair
Hella front Turn Buckets (No lenses) Nice clean units, $25 Pair
Wiper Motor and Mech. Can included arms $50
Wash Bottle $20
Brake Reservoir $20
Gas Tank *Inquire. Nice tank and Cap can have boiled out local cheap
Tank Strap $20
Original Ski rack! Kind of a cool nostalgia piece. Stainless has original padlock...but no key. Little dirty but should clean up well. This fits the factory mount holes on the underside of the roll bar and slot in the header. $60 shipped[attachmentid=556053][attachmentid=556053]
Everything should be priced very fair considering packaging, PP fees I will be covering and shipping on most items. But let me know if I’m out of line one anything. Also let me know if ther is something you need that is not listed. The car is very straight with some great metal. Discounts for local pick-up. Will start posting some pics tonight.
Thanks Folks!
Hey How r u?
I have a 1973, and I need to replace the headlight compartment on passenger side. How much would u be asking for it?
Thanks.
Luis
Posted by: Tbone425 May 22 2016, 10:57 AM
QUOTE(lcjo73914 @ May 22 2016, 07:36 AM)
QUOTE(Tbone425 @ May 19 2016, 06:51 PM)
Parts, parts and more parts…Risking life and limb from my wife, I (again) bought a roller to get some bits I needed including a side-shifter trans. It has been off the road for nearly 2 decades, but under cover. Hope its organs can help other teeners live on (shot drivers lateral and inner pass well. But might provide some other good sheet in the hole). Some really nice stuff. All prices include shipping and PP fees unless it states shipping not included. This is only on the big stuff. Glass will be packed in uhaul mirror boxes after being wrapped and braced w/cardboard. Shipping is from 85297 and my pricing is usually slightly better than FedEx website through my company. Let me know if there is anything you are looking for if its not listed. No engine. I have sent and recieved doors and bumpers through greyhound a number of times as well.
1.8 Engine tin, nice set cleaned and ready, little surface here and there. Most rubber and covers intact and nice. $150
Cooling Shroud and Fan Dirty but nice, Ill get it cleaned up and post a better pic, Alt not included and Alt tin goes with above set. $150
Wing window set Outstanding rubber, chrome and glass, very nice units. $100/Set
Rear Lights Lense (1) and Buckets. Buckets are decent, Pass lens is broken can include if wanted. $40
Dizzy Spins free unsure of condition though, visually nice unit $25
Dash Bottom Pad with Stainless trim. Includes vents Very presentable. Some small cracks from the bottom fastener holes back, should not be visible when mounted. $60 PLUS actual shipping.
Headlight Motors Will remove and test in my car $40 each or $125 for all light hardware buckets, small bumper to light trim and all Mounting hardware.
SOLD Pending****Targa Top Nice liner and shell rubber is rough. All latches. I had though about using it to hard mount a bike rack to, zero room in my garage for those shenanigans though $75 Plus shipping. Ill pack it in a uhaul art box.
Side Rockers. Look great. Will pull to check condition tonight. From what I can see looks to bee some surface but otherwise solid. $85 Pair
NEW Jack receiver plates. Unused, in primer still $20 Pair
Alt and 2 Starters (Bosch) Will have each tested in the AM $50 Each
Rear Glass Very Nice $75 Pus Shipping. uhaul art box
Door Glass $40 ea Plus Shipping
Clear Windshield and Chrome Molding The glass has a couple very slight pits, but no stars or cracks, VERY nice as is the Chrome molding. Bottom corner pieces could uses some gentle shaping with the eraser end of a pencil but very presentable still. $150 Plus Shipping will pack very well. Will separate.
Heater Controls $30
SOLD PENDING***Outer Door handles, Ignition switch, front trunk handle and rear hood buttom, Keys and one black OEM 914 key new in bag. $100
Tach and Speedo Unsure of functionality $50
Very nice Horn Pad 901 part number, very nice small chips in paint around corners of ring Pad is great. $60
Side door ding Moldings set. $35
Ash Tray Looks to be lightly used, Ill clean it up. Very nice though $15
Metal Front Valance Some dents around arm mounts, some surface rust. 4 of 10. $45 plus shipping
Rear Bumper Painted black, Top rubber strip is rough but intact. Bumperettes are slightly better. Includes struts. $60 plus shipping.
Door panels with arm rests and pocket. Very nice and presentable. Top of Pass door has some very small hairline splits on just the top roll. Nice functioning pocket lid on drivers door. Panels are black basket weave texture. $80 gets it all.
Side shifter couplers and tubes. Knob on shifter is an old Wooden one, shifter and tubes are nice. Will require the engine mount bar if going from a tail shift. Trans not for sale. $75
SOLD PENDING***Black Sun Visors Presentable, not split or faded $25 Pair
Hella front Turn Buckets (No lenses) Nice clean units, $25 Pair
Wiper Motor and Mech. Can included arms $50
Wash Bottle $20
Brake Reservoir $20
Gas Tank *Inquire. Nice tank and Cap can have boiled out local cheap
Tank Strap $20
Original Ski rack! Kind of a cool nostalgia piece. Stainless has original padlock...but no key. Little dirty but should clean up well. This fits the factory mount holes on the underside of the roll bar and slot in the header. $60 shipped[attachmentid=556053][attachmentid=556053]
Everything should be priced very fair considering packaging, PP fees I will be covering and shipping on most items. But let me know if I’m out of line one anything. Also let me know if ther is something you need that is not listed. The car is very straight with some great metal. Discounts for local pick-up. Will start posting some pics tonight.
Thanks Folks!
Hey How r u?
I have a 1973, and I need to replace the headlight compartment on passenger side. How much would u be asking for it?
Thanks.
Luis
I had a guy offer me $200 for the shell because he needed doors and the cowl. I figured I would give him a day or two to commit. If not I'll start cutting. I would think $40 plus shipping would be fair?
Chris
Posted by: 914OUTLAW May 22 2016, 01:00 PM
PM sent
Posted by: Tbone425 May 22 2016, 05:30 PM
QUOTE(liebe @ May 22 2016, 06:31 AM)
QUOTE(Tbone425 @ May 20 2016, 09:25 AM)
I will take all of the Engine tin if available, all located on the pic, 4 down.
Please send me total, 77079 shipping
And paypal, thank you
Yours. Yep, everything in the picture (minus the cooling fan shroud peeking into the pic and listed separately) there are some of the other grey heating ducts and things not in the pic Ill throw in there also. Shipping is going to be $27. PP is cataylor100@gmail.com Ill get them all boxed up and ready to roll tomorrow.
Chris
Posted by: Tbone425 May 22 2016, 07:38 PM
More pics
Attached thumbnail(s)
Posted by: era vulgaris May 23 2016, 05:01 PM
Do you have any pics of the rear bumper? I'd be interested if it isn't dented up or rusted.
Is the front bumper available as well?
Posted by: Jeff Bowlsby May 23 2016, 06:06 PM
What 914 wire harnesses do you have available? Would you pull the main chassis harness without cutting it anywhere and ship it...how much total to 94583?
The rear backpad looks flawless, is it? Is the drivers door card as nice as the passenger side? If so, how much total for the door cards and rear backpad - shipped to 94583?
Posted by: Tbone425 May 23 2016, 10:03 PM
QUOTE(era vulgaris @ May 23 2016, 04:01 PM)
Do you have any pics of the rear bumper? I'd be interested if it isn't dented up or rusted.
Is the front bumper available as well?
Front is junk, rear is straight but painted with some surface rust top and pads are spongy but intact. I will post pics of everything on Pelican (only due to file size limits). If you send me your email I can send one from my phone..,to txt.
Thanks,
Chris
Posted by: Tbone425 May 23 2016, 10:39 PM
QUOTE(Jeff Bowlsby @ May 23 2016, 05:06 PM)
What 914 wire harnesses do you have available? Would you pull the main chassis harness without cutting it anywhere and ship it...how much total to 94583?
The rear backpad looks flawless, is it? Is the drivers door card as nice as the passenger side? If so, how much total for the door cards and rear backpad - shipped to 94583?
No engine harness, just the main. I would pull it for the cost of lunch and a beer plus shipping. I have sent 911 harnesses to Timmy2 for about 15-20 USPS flat rate. I assume you are after the connectors if you build harnesses? So lunch a beer and a favor if ever needed would be my price.
The door cards are very nice. I'm really surprised they are not gone already at that price. One member in AU wanted them but shipping was murder. The drivers is nicer than the pass. Pass has maybe a half dozen hairline cracks in the top pad, but still very presentable driver quality. The drivers has no cracks I could find. The pocket, arm rest and lid are all awesome. Is you send me your email I will send you some high Rez photos. The membranes were still intact which did them justice over the last 40+ years I guess. Although the car was under cover. I think that pass pad might have caught morning sun.
I think I could do $250 for it all shipped, you aren't to far. Might have to be greyhound for the pad, but my fedex rates for my business aren't bad though. Should be a good "get it out of my garage" price. And I'll buy my own lunch and beer....but still a favor someday.
Let me know, thanks. Either way the harness is yours if you want it.
Thanks, Chris
Posted by: jwinner May 23 2016, 11:40 PM
I sent you a PM last week about wanting the door panels/pockets, shipped to 53150. My paypal email is jwinner11@gmail.com
Thank you,
James
Posted by: Tbone425 May 24 2016, 12:40 AM
QUOTE(jwinner @ May 23 2016, 10:40 PM)
I sent you a PM last week about wanting the door panels/pockets, shipped to 53150. My paypal email is jwinner11@gmail.com
Thank you,
James
James- Please forgive me, I thought I had send you a pm. You are (still) first in line $109 packed shipped and insured. Did I send you pictures of both sides? I would be happy to.
Again, sorry.
Posted by: Jeff Bowlsby May 24 2016, 10:24 AM
QUOTE(Tbone425 @ May 23 2016, 09:39 PM)
Let me know, thanks. Either way the harness is yours if you want it.
Thanks, Chris
Thanks Chris, will take you up on the main harness. I need the full harness complete, undamaged and uncut please, not just the connectors. Please disassemble the couple of connectors as necessary to remove the harness uncut. Use glycerin or KY (not oil) as lube if things get tight anywhere. If the snorkel tube is already damaged, go ahead and cut it off. I think you only need to pull the cover off the 14 pin connector at the relay board, remove the fuel pump connector housing and the two headlight connector housings (by pushing the wire terminal tangs in to disengage the wire terminals). All else should pull through the chassis holes into the cabin area towards the fusepanel. Will PM you my email for total amount and your paypal details.
Thanks! Jeff
Posted by: Tbone425 May 24 2016, 08:34 PM
QUOTE(Jeff Bowlsby @ May 24 2016, 09:24 AM)
QUOTE(Tbone425 @ May 23 2016, 09:39 PM)
Let me know, thanks. Either way the harness is yours if you want it.
Thanks, Chris
Thanks Chris, will take you up on the main harness. I need the full harness complete, undamaged and uncut please, not just the connectors. Please disassemble the couple of connectors as necessary to remove the harness uncut. Use glycerin or KY (not oil) as lube if things get tight anywhere. If the snorkel tube is already damaged, go ahead and cut it off. I think you only need to pull the cover off the 14 pin connector at the relay board, remove the fuel pump connector housing and the two headlight connector housings (by pushing the wire terminal tangs in to disengage the wire terminals). All else should pull through the chassis holes into the cabin area towards the fusepanel. Will PM you my email for total amount and your paypal details.
Thanks! Jeff
No problem Jeff! Hey do you have a number I can call or txt you at tomorrow if I have questions when I pull it.
Posted by: Tbone425 May 31 2016, 09:37 PM
Updated with eng and trans
Posted by: Al Meredith Jun 1 2016, 09:47 AM
If you want to ship a motor go to WWW.EngineShipping.com I have used them several times to ship engines and heavy parts. They will do all the paperwork and send you the documents you need and you pay them .They will tell you where to drop off the box . Very satisfied and about 1/2 the price . AL
Posted by: Tbone425 Jun 1 2016, 11:27 AM
QUOTE(Al Meredith @ Jun 1 2016, 08:47 AM)
If you want to ship a motor go to WWW.EngineShipping.com I have used them several times to ship engines and heavy parts. They will do all the paperwork and send you the documents you need and you pay them .They will tell you where to drop off the box . Very satisfied and about 1/2 the price . AL
Great tip! Thanks!
Posted by: 4theloveofhorses Jun 1 2016, 12:44 PM
QUOTE(Tbone425 @ May 19 2016, 06:51 PM)
[/color]Updated, added a few items****Parts, parts and more parts…Risking life and limb from my wife, I (again) bought a roller to get some bits I needed including a side-shifter trans. It has been off the road for nearly 2 decades, but under cover. Hope its organs can help other teeners live on (shot drivers lateral and inner pass well. But might provide some other good sheet in the hole). Some really nice stuff. Buyers have 24hrs to complete transactions or items go to next in line. Need to get this stuff out...
1.7 motor. Was takeout for a 2.0 upgrade. Turns free. Sat covered under an indoor workbench for several years. Set up for remote oil cooler. Includes tins, cooling fan, coil, flywheel, and brain. Set up for a single carb (not included) will also come with stock runners and plenum. Will palet and wrap for free buyer would need shipping from Phoenix. Willing to deliver to freight carrier. Buyer pays shipping and PP fees if not "friends". $450
Side shift transmission, stored indoors turns free and smooth. Will pack securely in a rugged tub. Buyer pays shipping and PP fees. $325
1.8 Engine tin, nice set cleaned and ready, little surface here and there. Most rubber and covers intact and nice. $150
Cooling Shroud and Fan Dirty but nice, Ill get it cleaned up and post a better pic, Alt not included and Alt tin goes with above set. $150
Wing window set Outstanding rubber, chrome and glass, very nice units. $100/Set
Rear Lights Lense (1) and Buckets. Buckets are decent, Pass lens is broken can include if wanted. $40
Dizzy Spins free unsure of condition though, visually nice unit $25
Headlight Motors Will remove and test in my car $40 each or $125 for all light hardware buckets, small bumper to light trim and all Mounting hardware.
NEW Jack receiver plates. Unused, in primer still $20 Pair
Alt and 2 Starters (Bosch) Will have each tested in the AM $50 Each
Door Glass $40 ea Plus Shipping
Heater Controls $30
Very nice Horn Pad 901 part number, very nice small chips in paint around corners of ring Pad is great. $60
Side shifter couplers and tubes. Knob on shifter is an old Wooden one, shifter and tubes are nice. Will require the engine mount bar if going from a tail shift. Trans not for sale. $75 plus shipping
Hella front Turn Buckets (No lenses) Nice clean units, $25 Pair
Wiper Motor and Mech. $50
Brake Reservoir $20
Gas Tank *Inquire. Nice tank and Cap can have boiled out local cheap
Tank Strap $20
Original Ski rack! Kind of a cool nostalgia piece. Stainless has original padlock...but no key. Little dirty but should clean up well. This fits the factory mount holes on the underside of the roll bar and slot in the header. $60 shipped[attachmentid=556053][attachmentid=556053]
Thanks Folks!
Posted by: Tbone425 Jun 1 2016, 07:57 PM
I have 3 side shifts in equal condition and history. Price above is each.
Posted by: Tbone425 Jun 1 2016, 07:59 PM
I have 3 side shifts in equal condition and history. Price above is each.
Posted by: Tbone425 Jun 4 2016, 12:51 PM
2 side shift remaining.
Posted by: bgconsul Jun 4 2016, 01:01 PM
QUOTE(Tbone425 @ Jun 4 2016, 11:51 AM)
2 side shift remaining.
Can you send photo of front turn signal buckets interior. looking for some with chrome remaining.
Thanks.
Posted by: Tbone425 Jun 10 2016, 02:30 AM
QUOTE(bgconsul @ Jun 4 2016, 12:01 PM)
QUOTE(Tbone425 @ Jun 4 2016, 11:51 AM)
2 side shift remaining.
Can you send photo of front turn signal buckets interior. looking for some with chrome remaining.
Thanks.
These are pretty dull. I'll post pics though.
Posted by: Tbone425 Jun 10 2016, 02:31 AM
QUOTE(Tbone425 @ May 19 2016, 06:51 PM)
****correction car is a 74*****ADDED ITEMS. Let me know if there is anything you are looking for if its not listed. No engine. I have sent and recieved doors and bumpers through greyhound a number of times as well.
2.0L GD code motor. Was rebuilt by PO and a can was not seated properly. As such, that can is bad, selling as a core for $450. Was told the heads (oval port) are "great" If I have to tear it down to find out I will part the motor and the price will adjusted accordingly (up/or down).
Perforated metal pedal board $50 shipped.
A/C compressor and parts. No idea of functionality. Only have what's pictured, $60 plus shipping
Pedal cluster, new pads and brass bushings, looks to be rebuilt maybe not used since. $100
1.8 Engine tin, very nice set cleaned and ready, little surface here and there. Most rubber and covers intact and nice. $175 shipped
Cooling Shroud and Fan Dirty but nice, Ill get it cleaned up and post a better pic, Alt not included and Alt tin goes with above set. $150 shipped
Wing window set Outstanding rubber, chrome and glass, very nice units. $75 /Set
Dizzy, Spins free unsure of condition though, visually nice unit $25
Dash Bottom Pad with Stainless trim. Includes vents Very presentable. Couple cracks. $50 PLUS actual shipping.
Headlight Motors Will remove and test in my car $40 each or $125 for all light hardware buckets, small bumper to light trim and all Mounting hardware.
Stainless Rockers. Look great. $75 pair plus shipping.
Original rockers, little dinged up here ant there, some surface rust still very viable and restorable, or shoot satin black and drive $50 plus shipping
Alt and 2 Starters (Bosch) all tested and working $50 Each
Door Glass $40 ea Plus Shipping
Heater Controls $30
Tach and Speedo Unsure of functionality black faces $50 for both.
Very nice Horn Pad 901 part number, very nice small chips in paint around corners of ring Pad is great. $50
Ash Tray Looks to be lightly used, Ill clean it up. Very nice though $15
very clean from bumper top broken stud on end. Not rusted or torn out just snapped $50 plus shipping.
More pics on pelicanparts
Everything should be priced very fair considering packaging, Buyer pays PP fees if not sent as friend.Let me know if I’m out of line one anything. Also let me know if ther is something you need that is not listed...I have three cars with of stuff right now. Discounts for local pick-up. Will start posting some pics tonight.
Added a bunch of stuff, more to come.
Posted by: Mr. Olympic Blue 2 You Jun 10 2016, 08:55 AM
I'm interested in the rebuilt? Pedal cluster and perforated pedal board pending pics please. Tmbracing61@msn.com if you want to email them.
Thanks!
Andrew
Posted by: Jett Jun 10 2016, 09:26 AM
Hello, interested in the back pad, if still available?
Shipping to 98052
Posted by: Tbone425 Jun 10 2016, 09:39 AM
QUOTE(Jett @ Jun 10 2016, 08:26 AM)
Hello, interested in the back pad, if still available?
Shipping to 98052
Sorry, sold. Too bad, I could have brought it to you next week in Seattle ( on our way back for summer)
Posted by: Tbone425 Jun 10 2016, 09:41 AM
QUOTE(Mr. Olympic Blue 2 You @ Jun 10 2016, 07:55 AM)
I'm interested in the rebuilt? Pedal cluster and perforated pedal board pending pics please. Tmbracing61@msn.com if you want to email them.
Thanks!
Andrew
Pics are on on pelican (hit file size limit here). Under same user name.
Posted by: 914_teener Jun 10 2016, 12:31 PM
I am interested in the "core" motor.
My son can pick it up if you are near Phoenix.
Rob
Posted by: bcheney Jun 10 2016, 02:29 PM
Can you post or send me better pics of
Stainless Rockers. Look great. $75 pair plus shipping.
brian.cheney@sprint.com
Thanks,
Posted by: carguy987 Jun 10 2016, 05:37 PM
QUOTE(Tbone425 @ May 20 2016, 05:56 PM)
QUOTE(Tbone425 @ May 20 2016, 01:28 PM)
QUOTE(malcolm2 @ May 20 2016, 10:47 AM)
Didn't see a targa pad listed. The 1/2 round pad that is on the targa bar just above the seats. The rear roof latches go thru it. do you have, are you using?
Like this one....
I didn't list it due to cracks, like the dash. I had considered recovering it, the pillars and the dash as a hobby project. It's complete, just has cracks. Think of an offer, then knock $10 bucks off it and it yours LOL. I can send a pic as well.
Would you sell the drivers side rear targa latch trim piece. It s the metal piece that goes around the latch that comes up from the targa bar?
Attached thumbnail(s)
Posted by: jacquot Jun 10 2016, 06:32 PM
Would be interested in any sway bars (front and rear) drop links and connectors you may have available.
thanks,
Jacquot
Posted by: Tbone425 Jun 13 2016, 09:20 AM
Sorry the only car with them was the one I'm keeping for my project.
Posted by: Tbone425 Jun 13 2016, 04:06 PM
Pictures at http://forums.pelicanparts.com/porsche-914-used-parts-sale-wanted/915024-76-914-part-out.html
Posted by: Tbone425 Jun 15 2016, 05:32 PM
QUOTE(Tbone425 @ May 19 2016, 06:51 PM)
more pics at
http://forums.pelicanparts.com/porsche-914-used-parts-sale-wanted/915024-76-914-part-out.html
2.0L GD code motor. Will part in Aug after I tear it down and see what I have.
Perforated metal pedal board $50 shipped.
A/C compressor and parts. No idea of functionality. Only have what's pictured, $60 plus shipping
Pedal cluster, new pads and brass bushings, looks to be rebuilt maybe not used since. $100
1.8 Engine tin, very nice set cleaned and ready, little surface here and there. Most rubber and covers intact and nice. $175 shipped
Cooling Shroud and Fan Dirty but nice, Ill get it cleaned up and post a better pic, Alt not included and Alt tin goes with above set. $150 shipped
Wing window set Outstanding rubber, chrome and glass, very nice units. $75 /Set
Dizzy, Spins free unsure of condition though, visually nice unit $25
Dash Bottom Pad with Stainless trim. Includes vents Very presentable. Couple cracks. $50 PLUS actual shipping.
Headlight Motors Will remove and test in my car $40 each or $125 for all light hardware buckets, small bumper to light trim and all Mounting hardware.
Stainless Rockers. Look great. $75 pair plus shipping.
Original rockers, little dinged up here ant there, some surface rust still very viable and restorable, or shoot satin black and drive $50 plus shipping
Alt and 2 Starters (Bosch) all tested and working $50 Each
Door Glass $40 ea Plus Shipping
Heater Controls $30
Tach and Speedo Unsure of functionality black faces $50 for both.
Very nice Horn Pad 901 part number, very nice small chips in paint around corners of ring Pad is great. $50
Ash Tray Looks to be lightly used, Ill clean it up. Very nice though $15
very clean from bumper top broken stud on end. Not rusted or torn out just snapped $50 plus shipping.
More pics on pelicanparts
Everything should be priced very fair considering packaging, Buyer pays PP fees if not sent as friend.Let me know if I’m out of line one anything. Also let me know if ther is something you need that is not listed...I have three cars with of stuff right now. Discounts for local pick-up. Will start posting some pics tonight.
Pedal cluster boxed, in my truck, and ready to ship...due to non-payment.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)