Posted by: JFG May 24 2016, 01:41 PM
As per the title. I need manifolds and if you have some I need the air filters/housings also
Posted by: stugray May 24 2016, 05:55 PM
QUOTE(JFG @ May 24 2016, 01:41 PM)
As per the title. I need manifolds and if you have some I need the air filters/housings also
For 1.7/1.8 or 2.0L heads?
Posted by: JFG May 25 2016, 12:57 AM
It's 1.7 with 4 stud bolt patern at the intake ports.
Posted by: rhodyguy May 25 2016, 08:22 AM
You'll find most, I can't say ALL with certainty, of the aftermarket carb manifolds are made to fit on both 3 and 4 stud heads.
Posted by: stugray May 25 2016, 09:32 AM
QUOTE(JFG @ May 25 2016, 12:57 AM)
It's 1.7 with 4 stud bolt patern at the intake ports.
I have a set that will fit.
They are considered the "shorty" style.
I'll pull them out and get pics tonight.
QUOTE(rhodyguy @ May 25 2016, 08:22 AM)
You'll find most, I can't say ALL with certainty, of the aftermarket carb manifolds are made to fit on both 3 and 4 stud heads.
The intake port diameter is different between the two heads (2.0L being larger)
At least that is what I observed when comparing two sets of manifolds that I have.
Posted by: stugray May 25 2016, 09:48 PM
$40 + shipping?
all four cyls have the nipples.
Posted by: JFG May 27 2016, 05:38 AM
Thanks for the replies but i have just managed to find a pair close to me.