I need the left and right outer trailing arm pivot mounts. This is a part bolted to the trailing arm and support the outer side of the trailing arm to the suspension console. See the picture.
I also need one left & right L-Shaped 3 hole washer type bracket that fit between the bolts and the trailing arm pivot mounts.
I have all of those parts as a set. Powder coated brackets, replated hardware and new Schnoor washers for the bolts.
Can put together more set if anyone else is interested.
Bruce
Attached thumbnail(s)
So you want the L plates and used brackets? The Schnoor washers are a one use washer and need to be replaced.
Used plates and used brackets. No washers or bolts. Zip 55082
Thank you
[/quote]
like this?
Attached thumbnail(s)
[quote name='bdstone914' date='May 31 2016, 01:50 PM' post='2352730']
Used plates and used brackets. No washers or bolts. Zip 55082
Thank you
[/quote]
like this?
[/quote]yYes, that's what I need. How much $.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)