Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ F/S Misc parts

Posted by: Blue6 Jun 5 2016, 10:23 AM

Passing on a lot of good junk. All prices are plus actual shipping costs. Your choice of shipper. Paypal to F&F please. Locals will get preference on large items as packaging and shipping would be expensive. If interested in anything, just pm me for more detailed pics.
1. Early rear bumper, notice the two small holes where p/o mounted lic plate directly to it, some small dents. Very nice for 46 yrs old, perfect for you fellas doing a 6 resto. $850
2. Front bumper, small dents, holes for tits, nice cond, $200***SOLD***
3. Frt bumper top, no cracks, chips or waves, getting a rough texture due to age, but very presentable, all studs are good, $75***SOLD***
4. Body metal, drivers rear corner, $40. ----------- Pass frt corner,$40.**SOLD**
5. 1970 gas tank with sending unit And all mounting hardware. Clean inside and out, $80.****SOLD****
6. Drivers side rear suspension mount, rust free, $60
7. Batwing horn button complete, metal frame has been nicely repainted, $80***SOLD***
8. 1970 wiper motor and assembly, $20
9. 1970 fuel inj parts, $40
10. Side mirror, middie yrs, not the sharp 90*, and no serial number imprinted, very nice cond, $75***SOLD****
11. 2.0 metal emblem, both studs good, $35****SOLD****
12. Fog light grills, no breaks or cracks, rattle canned chrome, set $80, 2 extra drivers side grills $30 each***SOLD***
13. Rear suspension mounting brackets, blasted and primed, $50
14. Speaker grills, very nice but not perfect, one small crack in a mounting hole, $100
15. Late rear hubs, replated, $75****sold****
16. Heater flapper boxes, blasted and painted pair, $80, original pair $50***sold***
17. 16- 911 alloy lug nuts, used, $20***SOLD***
18. Wheel lock set with ket, blasted and ready for you to paint, $10***SOLD***
19. Alt vent covers, 1 has 1 broken mounting tab, $10, 1 with all tabs intact, $15
20. Timing inspection plug, , $15
21. 1970 relay board, $40***SOLD***
22. Front brake dust shields, blasted and repainted, $35 a set
23. Gas cap, replated, $10***SOLD***
24. Numerous heater tubes, just tell me what you need pics of and if they're worth anything to you***Sold***
25. 3 piece targa trim, painted bulk, slight distortion from difficult removal. $30
26. 1970 stock torsion bars, $25
27. Several sets of A&B pillar chrome trim and bottom sail panel trim, $15 a set
28. Engine lid rubber stop with bracket and replated screw and washer, $40Attached Image Attached Image

Posted by: Blue6 Jun 5 2016, 10:25 AM

Attached Image Attached Image

Posted by: Blue6 Jun 5 2016, 10:28 AM

Attached Image Attached Image

Posted by: Blue6 Jun 5 2016, 10:30 AM

Attached Image Attached Image

Posted by: Blue6 Jun 5 2016, 10:31 AM

Attached Image Attached Image

Posted by: Blue6 Jun 5 2016, 10:32 AM

Attached Image Attached Image

Posted by: Blue6 Jun 5 2016, 10:34 AM

Attached Image Attached Image

Posted by: mepstein Jun 5 2016, 10:34 AM

I'll take the front bumper and bumper top. I'll take care of shipping.

Posted by: Blue6 Jun 5 2016, 10:36 AM

Attached Image Attached Image

Posted by: Blue6 Jun 5 2016, 10:37 AM

Attached Image

Posted by: forrestkhaag Jun 5 2016, 10:44 AM

I will take the relay board for 40 + shipping or better yet pick up if near Laguna Beach Ca. paypal?

beerchug.gif

forrest

Posted by: tweet Jun 5 2016, 10:50 AM

i'll take:

Wheel lock set with ket, blasted and ready for you to paint, $10
Batwing horn button complete, metal frame has been nicely repainted, $80
Gas cap, replated, $10

how much for the white screwdrivers?

Posted by: bdstone914 Jun 5 2016, 10:52 AM

BTW the white handle screw drivers were 74 only. Nice parts, nice prices. Did you sterilize the parts before sealing them in plastic? poke.gif

Posted by: Blue6 Jun 5 2016, 11:08 AM

QUOTE(bdstone914 @ Jun 5 2016, 09:52 AM) *

BTW the white handle screw drivers were 74 only. Nice parts, nice prices. Did you sterilize the parts before sealing them in plastic? poke.gif

Thank you for the info Bruce. The cleaning and packaging is Jims thing, he's OCD. You can imagine how that six will be.

Posted by: banananose914 Jun 5 2016, 01:20 PM

i'm watching you Dave, and I read what you posted. Big Brother is always around and lurking in his Orwellian ways.

Posted by: bdstone914 Jun 5 2016, 01:37 PM

QUOTE(Blue6 @ Jun 5 2016, 10:08 AM) *

QUOTE(bdstone914 @ Jun 5 2016, 09:52 AM) *

BTW the white handle screw drivers were 74 only. Nice parts, nice prices. Did you sterilize the parts before sealing them in plastic? poke.gif

Thank you for the info Bruce. The cleaning and packaging is Jims thing, he's OCD. You can imagine how that six will be.


OCD ? I thought he was just someone who had their toilet training at gun point.

Posted by: banananose914 Jun 5 2016, 01:50 PM

Alright Bruce, Big Brother is watching you as well. Your both on report.

Posted by: mepstein Jun 5 2016, 02:34 PM

Any early steering wheels? If so, I'm probably a buyer.

Posted by: db9146 Jun 5 2016, 03:22 PM

What about the set of hold-down small straps? Are those for an early jack? Are they in good shape?

Posted by: bdstone914 Jun 5 2016, 04:10 PM

QUOTE(db9146 @ Jun 5 2016, 02:22 PM) *

What about the set of hold-down small straps? Are those for an early jack? Are they in good shape?


Early round post jacks attached to the car with a metal clamp in the drivers side rear of the trunk.

Posted by: Blue6 Jun 5 2016, 04:18 PM

QUOTE(db9146 @ Jun 5 2016, 02:22 PM) *

What about the set of hold-down small straps? Are those for an early jack? Are they in good shape?

I agree with Bruce, the early cars had a metal clamp. I'll check the straps and see what condition. I would suspect that the hardware is good, but remember the rubber would be approx 40 yrs old. I think 914 rubber has a replacement.

Posted by: ahycaramba Jun 5 2016, 04:34 PM

interested in the alloy lug nuts. can i get a picture of the lug nuts. also interested in the spare tire hold down anodized disc and anodized mounting plate for spare tire , did not see price. (in same picture with lug nuts)
thanks Al

Posted by: Blue6 Jun 5 2016, 04:45 PM

QUOTE(ahycaramba @ Jun 5 2016, 03:34 PM) *

interested in the alloy lug nuts. can i get a picture of the lug nuts. also interested in the spare tire hold down anodized disc and anodized mounting plate for spare tire , did not see price. (in same picture with lug nuts)
thanks Al


I'll get some better pics of the lug nuts tomorrow. They are the 911 alloy type, and are used. The spare tire kit was on the firewall of the front trunk, and mounted the spare vertically against the gas tank..

Posted by: ahycaramba Jun 5 2016, 04:48 PM

thats exactly what i'm looking for. (spare tire kit). thanks. can i get a price on that?

Posted by: wes Jun 5 2016, 05:17 PM

PM for one white handle screwdriver if still available.

Posted by: Blue6 Jun 5 2016, 09:52 PM

Sorry, both screwdrivers are sold.

Posted by: Ansbacher Jun 6 2016, 10:24 AM

PM sent on Fog Light Grilles.

Posted by: Blue6 Jun 7 2016, 09:12 AM

All pm's returned, and sold items indicated. Thanks

Posted by: kafermeister Jun 9 2016, 09:38 AM

I will take the front corner. Will take both front corners if you have them.


Attached Image

Posted by: Blue6 Jun 9 2016, 11:52 AM

QUOTE(kafermeister @ Jun 9 2016, 08:38 AM) *

I will take the front corner. Will take both front corners if you have them.


Attached Image


Sorry the other corner has been sold. Do you need any better pics?

Posted by: Jett Jun 9 2016, 01:31 PM

Hello, if still available, I'll take the 2.0 emblem and both windshield pillar trim pieces that hold the sides of the main targa seal. Shipping to 98073

Cheers!!

Posted by: Abq914 Jun 9 2016, 08:01 PM

on your item 5, the tank and hardware I'm interested in the 2 small fuel pipes with nuts that screw into the bottom of the tank. how much?

ddaffron28@yahoo.com

abq814

Posted by: Blue6 Jun 10 2016, 12:14 AM

QUOTE(Abq914 @ Jun 9 2016, 07:01 PM) *

on your item 5, the tank and hardware I'm interested in the 2 small fuel pipes with nuts that screw into the bottom of the tank. how much?

ddaffron28@yahoo.com

abq814

Sorry, for now I'll keep the hardware with the tank.

Posted by: kafermeister Jun 10 2016, 05:26 AM

QUOTE(Blue6 @ Jun 9 2016, 01:52 PM) *

QUOTE(kafermeister @ Jun 9 2016, 08:38 AM) *

I will take the front corner. Will take both front corners if you have them.


Sorry the other corner has been sold. Do you need any better pics?



No, I think that pic is sufficient. If it will make things easier for shipping, I don't need any of the fender. This is the hole I am trying to fill. Was also going to backdate the bumpers so a part like yours with the early bumper holes is appropriate for what i am hoping to accomplish.

Attached Image

Posted by: Blue6 Jun 10 2016, 09:38 AM

Jett, they're yours. Let me find a box, and get you some shipping quotes.

Kafermeister, I'll break out the sawsall again and cut that thing down to size. Are you in a hurry?

Posted by: pete000 Jun 10 2016, 11:01 AM

QUOTE(bdstone914 @ Jun 5 2016, 09:52 AM) *

BTW the white handle screw drivers were 74 only. Nice parts, nice prices. Did you sterilize the parts before sealing them in plastic? poke.gif



How much for a white handle screwdriver?

Posted by: mepstein Jun 10 2016, 12:17 PM

Very good seller!

Posted by: Blue6 Jun 10 2016, 09:20 PM

QUOTE(pete000 @ Jun 10 2016, 10:01 AM) *

QUOTE(bdstone914 @ Jun 5 2016, 09:52 AM) *

BTW the white handle screw drivers were 74 only. Nice parts, nice prices. Did you sterilize the parts before sealing them in plastic? poke.gif



How much for a white handle screwdriver?

Sorry, they are both gone already.

QUOTE(mepstein @ Jun 10 2016, 11:17 AM) *

Very good seller!

Mark, wait till we're done conducting business before you pass judgement. Now that I have your $$ we're going to the Bahamas. biggrin.gif

Posted by: kafermeister Jun 13 2016, 06:30 AM


No hurry for me. I am still collecting parts for it. Won't start on the car for another year at best.

Thanks
-Rick

QUOTE(Blue6 @ Jun 10 2016, 11:38 AM) *

Jett, they're yours. Let me find a box, and get you some shipping quotes.

Kafermeister, I'll break out the sawsall again and cut that thing down to size. Are you in a hurry?


Posted by: injunmort Jun 13 2016, 08:00 AM

greetings, would you have engine wiring harness for '70-71?

Posted by: Tjmrfe Jun 13 2016, 09:49 AM

Hello,
Do you still have the 2.0 emblem?
If so, maybe we can make a deal?
Thanks....
Terry.

Posted by: Blue6 Jun 13 2016, 04:16 PM

QUOTE(injunmort @ Jun 13 2016, 07:00 AM) *

greetings, would you have engine wiring harness for '70-71?

Sorry no harness, check with Jeff Bowlsby. He should have what you need.

QUOTE(Tjmrfe @ Jun 13 2016, 08:49 AM) *

Hello,
Do you still have the 2.0 emblem?
If so, maybe we can make a deal?
Thanks....
Terry.

Sorry the emblem is pending a shipping quote..

Posted by: Shadowfax Jun 13 2016, 04:52 PM

PM sent. Thanks.

Posted by: Blue6 Jun 20 2016, 06:05 PM

QUOTE(Tjmrfe @ Jun 13 2016, 08:49 AM) *

Hello,
Do you still have the 2.0 emblem?
If so, maybe we can make a deal?
Thanks....
Terry.


Terry, sorry for the delay. The emblem is pending, if he doesn't take it I'll pm you. Thanks

Posted by: turnaround89 Jun 20 2016, 08:28 PM

Since Kafermeister is buying that small portion of the passenger front corner.

Can I buy the remaining portion of the front passenger corner for $35? The portion that still contains the turn signal bucket.

Would you be able to snap a picture after you cut out the portion for Kafermeister?

Thank you so much!


Posted by: Blue6 Jun 20 2016, 10:58 PM

Turnaround89, how about $30, and I'll cut Kafermeister a deal also. Send me an email and I'll get you a pic. I'll try to cut it tomorrow...

Posted by: turnaround89 Jun 21 2016, 09:09 PM

QUOTE(Blue6 @ Jun 20 2016, 11:58 PM) *

Turnaround89, how about $30, and I'll cut Kafermeister a deal also. Send me an email and I'll get you a pic. I'll try to cut it tomorrow...


PM Sent

Posted by: Blue6 Jun 22 2016, 11:10 PM

Sold item indicated and all pm's replied to...

Posted by: Blue6 Jul 17 2016, 09:21 PM

icon_bump.gif

Posted by: Guberif Jul 27 2016, 12:49 PM

Interested in the sail panel chrome trim biggrin.gif

Posted by: amfab Jul 27 2016, 02:11 PM

I am interested in left and right sail panel trim bottoms

Posted by: Harpo Jul 29 2016, 03:02 PM

I would like one of the extra drivers side grills $30 each. Will that fit in a USPS medium flat rate box?

Thanks

David

Posted by: JB620 Aug 22 2016, 08:01 AM

Are the heating tubes still available? PM sent

Posted by: 914 RZ-1 Aug 22 2016, 10:22 PM

QUOTE(Blue6 @ Jun 5 2016, 09:32 AM) *

Attached Image Attached Image


PM sent about fog light grills.

Posted by: twistedstang Aug 23 2016, 05:42 AM

I'll take the rear hubs.

Shipped to 48049

Posted by: JB620 Sep 11 2016, 10:42 AM

icon_bump.gif For a great seller!!!

Posted by: eyesright Sep 15 2016, 06:26 AM

I have a glove box to install in my '70 but I need a securing strap that wraps around the back. Got one?

Sending PM too.

Tim
73527

Posted by: Korijo914 Oct 3 2016, 02:45 AM

Do you have any turn signal buckets? They go in the holes of the sheet metal that kafermiester, or the other guy is taking after you cut the metal for kafermiester is getting. I just need the buckets that go into the holes.

I am going to send a lot of them to a chromer, and make them all nice and chromey then, make them into euro, split lenses with two bulbs, or if people want a single, yellow lens, and a bright yellow bulb.

I think Quarl did it a while ago. And fog lamp seals, and halogen white bulbs for the cockpit. I have a lot, but they are in Montana, and I am in Washington!

So, do you have any turn signal buckets? How much is shipping to Snohomish, Wa 98290?

Thanks,

Korijo914 ( David Cawdrey )

Posted by: forrestkhaag Oct 21 2016, 09:33 AM

QUOTE(forrestkhaag @ Jun 5 2016, 09:44 AM) *

I will take the relay board for 40 + shipping or better yet pick up if near Laguna Beach Ca. paypal?

beerchug.gif

forrest


Hey Dave: Are you going to the swap meet this weekend? / I think Kieth wants the relay board you have for me.......

Posted by: Blue6 Oct 21 2016, 08:38 PM

Yes Forrest, I'll be there with lotsa good $hit to sell. I'll bring the board for Keith.

Posted by: Ross Nov 14 2016, 01:14 PM

Hi, do you still have your fuel tank?

Thank you, Ross

Posted by: Ross Nov 14 2016, 01:16 PM

Hi, do you still have your fuel tank? I have a 72, 1.7. Do you knbow if the tank is the same?

Thank you, Ross

Posted by: Blue6 Nov 14 2016, 05:21 PM

Sorry Ross, the tank has been sold...

Posted by: Korijo914 Nov 15 2016, 01:38 AM

Hey there,

Do you still have the sail trim and the top targa trim across the top? Which is in better condition? The black painted set, or the polished set?

Or is only one set still available? If you can, please PM me? My eye controlled computer is acting weird. I can still PM you, but it's not letting me send the PM without previewing it.

Or you just email me at : keoneeli@gmail.com

Thanks for your time!

korijo 914

Posted by: Blue6 Nov 15 2016, 10:24 AM

Pm sent

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)