I have 4 different header/muffler setups. I *believe* 3 of them are 2.0L and 1 is a 1.7/1.8L.
First one is the nicest - 1.5" Primaries and 2" main diameter. Very good condition - looks barely used to me. 4 into 1 merged header type. Small dent in muffler - for clearance?
19.5" from center of inner bolt hole to center of inner bolt hole.
$200
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0172_zps7shl01hm.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0173_zpsg1rlsi4l.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0174_zpsi1ls7lzw.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0175_zpsim3zhhlo.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0176_zpscilylodu.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0181_zpskr3coqzz.jpg.html
Next one is a nice tri-Y setup, A Sebring, I believe? Looks like a replacement muffler maybe, but welded on really well. 1.5" primaries, 2.0" main, 19.5" center to center inner bolt holes.
$200
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0182_zpsxbkzsybn.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0183_zpsuyrmeuyp.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0184_zpslrjnztt6.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0185_zpsat1tuj7d.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0186_zps7cjnugku.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0187_zpsq0w4gnu1.jpg.html
Third is a Tri-Y with a glass pack or cherry bomb type muffler. Brace needs to be rewelded on the muffler. 1.5" primaries, 2" main tube, 19.5" center to center.
$125
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0189_zpsw7pv93pm.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0190_zpspi6tdkqy.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0191_zpslrwomnpk.jpg.html
Last one is a bit crusty - has some iffy welds, dented primaries, etc. 1.5" primaries, 2" main, 21 1/4" center to center bolt holes.
$50
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0189_zpsw7pv93pm.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0190_zpspi6tdkqy.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0191_zpslrwomnpk.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0194_zpsjqce1wcb.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0195_zps0qphylb1.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0196_zpskkcvrdrh.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0197_zps4esk2wbh.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0198_zpsjiys9duh.jpg.html
http://s61.photobucket.com/user/greggearhead/media/SL/EXHAUST/DSC_0199_zpsmfjh7r0g.jpg.html
Bump for offers
I have a nice set of headers / pipes some would call them to add to this offering / you pay shipping and a 10.00 handling charge to get them packed up, buy muddlwe item per sellers requirements and separately this, and the bundle is all yours....
Attached image(s)
Really - no one?
I had to start somewhere - as is custom - anyone can make me an offer.
Bump
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)