Printable Version of Topic

Posted by: type11969 Jun 18 2016, 07:46 AM

Was planning on tearing this tranny down, rebuilding and selling, but its just been sitting in my garage for 4 years. I want the space back. Should be a good core for a rebuild or may be usable as is. Note that the trans is complete, it has not been torn down (the parts pictured are spares from another transmission).

The 914 that it came out of had 69k miles and hasn't moved since the late 80s. It was parked in a damp garage and it rotted from the ground up. There is a bit of corrosion on the tranny itself, but it brushes off. Nothing mechanical.

The box of parts is left over from a rebuild session with Dr. Evil - not sure what is good and what isn't. Certainly the best parts went in the tranny I have, but there still could be some gems in there.

Also included are the two sideshift linkage pieces and the gearshift - only piece missing to perform the conversion is the engine bar outside of mounts, bushings, etc that can be purchased new.

$350 obo takes it all. Local pickup only or shipping is possible if you are willing to handle packing cost and setup.

Let me know if you have any questions.

-Chris

http://s19.photobucket.com/user/type11969/media/for%20sale/IMG_2476%20-%20Copy.jpg.html

http://s19.photobucket.com/user/type11969/media/for%20sale/IMG_2478%20-%20Copy.jpg.html

http://s19.photobucket.com/user/type11969/media/for%20sale/IMG_2477%20-%20Copy.jpg.html

http://s19.photobucket.com/user/type11969/media/for%20sale/IMG_2475%20-%20Copy.jpg.html

http://s19.photobucket.com/user/type11969/media/for%20sale/IMG_2545%20-%20Copy.jpg.html

http://s19.photobucket.com/user/type11969/media/for%20sale/IMG_2514%20-%20Copy.jpg.html

http://s19.photobucket.com/user/type11969/media/for%20sale/IMG_2513%20-%20Copy.jpg.html

http://s19.photobucket.com/user/type11969/media/for%20sale/IMG_2512%20-%20Copy.jpg.html

http://s19.photobucket.com/user/type11969/media/IMG_2941.jpg.html

http://s19.photobucket.com/user/type11969/media/IMG_2940.jpg.html

Posted by: type11969 Jun 18 2016, 07:48 AM

I may have a spare set of sideshift linkage too if anyone is interested.

Posted by: stugray Jun 18 2016, 08:58 AM

How much for all of the loose parts shipped to CO?

I have a tail shift that I would like to convert to Side, and it looks like you have the required parts in that stash (minus the actual external shift console)

Or I might be interested in JUST the shift rods.

Posted by: type11969 Jun 18 2016, 10:02 AM

Honestly not sure if all of the parts are there, but I'll grab a weight and box size later this weekend and let you know.

-Chris

Posted by: type11969 Jul 23 2016, 09:38 AM

Bump

And Stu, just realized I never got back to you about shipping costs. The box of parts is about 10x10x10 and weighs at least 20 lbs. Off the cuff I am going to say that it will cost somewhere between $30 and $40 to ship to CO, but if you are still interested, I can get more specific (just send a zip). I will get back to you faster this time!

-Chris

Posted by: type11969 Aug 6 2016, 05:53 PM

Bump

Posted by: type11969 Aug 20 2016, 08:37 AM

Bump - now includes sideshift linkage and gearshift pieces. $450 takes it all.

Posted by: type11969 Oct 10 2016, 11:05 AM

Bump - $350

Posted by: sabart Oct 11 2016, 06:32 AM

Hi. What about SH cost to 60018 ?

Best Regards

BS

Posted by: stugray Oct 11 2016, 11:40 AM

I never fully understood how much you wanted for all the loose parts.

You said above $30 to $40 for shipping, but I did not understand if that was JUST shipping or the total.

Posted by: type11969 Oct 11 2016, 06:11 PM

Stu-

Sorry I never followed through. I'm pretty sure the parts in that box all came out of tailshifters, but I don't pretend to be an expert on the subject. I'll take $20 for the parts, not including shipping. Let me know if you are still interested and I can a real shipping quote.

-Chris

Posted by: type11969 Oct 11 2016, 06:13 PM

BS - you would need to look in to this, I am not willing to crate. I can drop the tranny off at whatever shipping location is willing to crate this up, you just need to let me know where/when. My zip code is 08108 if you want to do some research - let me know what you decide.

-Chris

Posted by: type11969 Oct 22 2016, 09:03 AM

Bump - $300 for the tranny, spare parts, linkage bits and shifter.

Posted by: rhodyguy Oct 22 2016, 11:16 AM

If you should decide to ship, get a large Rubbermaid tote from Walmart. No need for a crate. The trans will ship safely with a bit of padding. Tote is part of shipping costs.

Posted by: type11969 Oct 22 2016, 11:24 AM

Interesting - would you recommend UPS? Or greyhound only?

Posted by: rhodyguy Oct 22 2016, 06:42 PM

$80? Across the states via FedEx. I sent 1 or 2 to mike years back. 2 tubs of clinic parts. Best rate with a free FedEx account and shipping at a distribution center. Zip tie the lid shut. LOTS of ties. The tub is around $17. The account works well for me as my d.c. no longer accepts cash.

Posted by: type11969 Nov 25 2016, 09:54 AM

Bump - perfect xmas present

Posted by: fongbros Dec 9 2016, 09:38 AM

Pm sent

Posted by: type11969 Dec 27 2016, 05:51 PM

Tranny is sold, linkage is still available (will be up in a new ad)