914-6 OEM replica motor mount designed by Original Customs and manufactured by Maddogs Motor Sports. This mount will fit up to the 3.2 liter flat six and works with early and late cars. BE AWARE that the mount uses the WEVO 911 Sport mount that is sold separately. The retail price on my website is $350, I have 10 available so here is the price breakdown:
5 buyers $300 shipped
here is the group buy status so far:
1. Colingreene
2. Flyer86d
3. Mastercylinder
4. Raynekat
5. 914outlaw
6. Mikey914
this group buy will close this Friday August 19 for the $300 price. Those that are on the list so far pm me your paypal emails and I will paypal invoice you. These are ready to ship so as soon as I receive payment they will ship UPS ground.
This wiring is on a 75/76 chassis. 70-74 cars will route MUCH better. The hole in the shelf was moved towards the center of the car in the late bodies.
This is a great deal for folks. I just made 3 sets for myself and 1 member and I wouldn't even consider selling them for this price.. Nice job
I am in for one for T.Hartline.
Can the engine mount portion be used with a stock -6 chassis mount? Reason, I would like a seperate engine mount for the hot rod motor and keep the stock with the original.
Charlie
Charlie, I believe it can, LukeM is using the WEVO mount and plate in place of his stock rubber mount and had to put a 6mm shim because the wevo is shorter than the stock one so I think you would be ok? Maybe Mark D can confirm this?
Curious with all of these aftermarket engine mounts, it seems like the snorkel that runs the back end wiring is always in a bind, contorted, twisted, etc.
Is this a problem?
I've got the other style 914-6 engine mount (Velios type) and I'm working this out as we go.
How to get the snorkel to smoothly and nicely get past these non factory engine mounts.....
[quote name='maddog' date='Jun 30 2016, 04:57 AM' post='2365813']
Charlie, I believe it can, LukeM is using the WEVO mount and plate in place of his stock rubber mount and had to put a 6mm shim because the wevo is shorter than the stock one so I think you would be ok? Maybe Mark D can confirm this?
[quote name='flyer86d' post='2365659' date='Jun 29 2016, 04:04 PM']
Can the engine mount portion be used with a stock -6 chassis mount? Reason, I would like a seperate engine mount for the hot rod motor and keep the stock with the original.
Charlie
You will need a 6 mm spacer if you are planning on using a Wevo mount/adapter plate with a factory 914-6 firewall and engine mount.
I purchased the Wevo mount and adapter plate from Dave/Mark.
I noticed right away that there was a height difference between the factory rubber mount and the Wevo. I measured the two side by side and the Wevo was 6 mm shorter then the factory 6 part. I plan on making up a 6 mm spacer that would go between the lower side of the Wevo mount and the top of the factory 6 engine mount. That should fix the height problem. I do not know if Mark added the 6 mm difference on his engine side mount? That would be a question that he would need to answer. Hope this helps out the factory 6 guys looking to replace a worn out/damaged rubber engine mount.
OK, thanks for the input. Based on that, add me to the list for one. I only need the engine portion but I will purchase the whole thing and add the firewall piece to my collection of parts to build another one.
Charlie
here is the group buy status so far:
1. Colingreene
2. Flyer86d
3. Mastercylinder
4. Raynekat
5. 914outlaw
6. Mikey914
see original post above
I'd need a better pic of how the snorkel weaves through this new mount before I'd be a buyer and join the group.
Most of the after market mounts don't make it easy for the snorkel and wiring to get from the tunnel into the engine compartment.
Plus is it certain the factory rubber mount and upper/lower plates fit with this new mount? ...in case you don't want to go the Wevo route?
Raynekat, what year is your car?
70-74 are just like the original 914-6 and they won't interfere.
75-76 cars have the snorkel in the location pictured above and you have to make adjustments or run it like the picture above.
I will take one.
That's what it was designed to work with. Let me just confirm one measurement first though. I'll respond tomorrow.
Confirmed the measurement. Should work just fine with a stock mount.
OK, then put me down as part of the group buy. I'll be trading in that other mount that you PM'd me about. I'll hang on to mine until the group buy is official.
Need one more buyer to close this group buy, this is a great deal, last chance to get this at a discounted price.
Put me down for one as I will probably do this later. I also have the snorkel tubes that are about 1" longer for those that need one. Will this work with the factory mount? as I'm working on these now too!
I measured the mount based on a real six mount, but have since lost access to the mount. So the best I can say is that it's supposed to work with a factory rubber mount.
See original posting, this group buy will be closed Friday August 19th.
Last chance to get in on this group buy, it will be closed tonight at midnight.
I still have 4 of these units ready to ship out, let me know if you have any questions.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)