Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ Toyota 4AG swap package for 914

Posted by: mrfourteen Jul 15 2016, 10:54 AM

Most of whats needed to swap a Toyota 4AG int a 914. This will fit without cutting the car up with enough room for the radiator in the engine bay.
Kennedy adapter and flywheel uses VW clutch and 914 T/O bearing.
Included are the following.
1.6 twin cam 16 valve 4AG engine from RWD GTS Carolla
Rowland intake and Weber synchronous 38/38 "Outlaw" carb.
Internal regulated alternator with new belt
914 side shift transaxle Kennedy adapter plate and starter
New clutch, pilot bearing and Sachs T/O bearing.(flywheel is new unused)
New aluminum radiator with electric fan, Toyota oil cooler with electric fan.
EDIS ignition components (crank pulley has been turned to accept trigger wheel)
Stainless low mount turbo header.
Steel merged header for non turbo application.
Pair of temp. engine mounts

The engine has new timing belt, oil filter and water pump and is equipped with t-stat controlled oil cooler circut. OEM spare oil filters
This set up should make about 120 HP.
If you know 4AG engines you probably can see the potential in this swap.
If not do a little research. My plan was to use this engine to sort out the install then switch to a 20 valve version of the 4AG (they make 190ish HP)
Simple install with minimal wiring and fuel delivery to sort.
$914.11 offers/ trades
I'll post more photos on craigslist here is a link
http://portland.craigslist.org/grg/pts/5684311773.html

Attached Image

Attached Image

Attached Image

Posted by: mrfourteen Jul 27 2016, 07:05 AM

bump up

Posted by: Rotary'14 Jul 27 2016, 11:38 AM

Would you be interested in a Subi 6 cylinder (EZ30D) with un cut wiring harness,ECU and sensors in trade?

Posted by: mrfourteen Jul 30 2016, 10:02 AM

Thanks but if I could do a swap it would be the 4AG It would be an easy swap with this package.
I just can't do this now. (or ever)
Too bad I did a 4AG in my MGB GT and it was amazing. Have a look.
http://oppositelock.kinja.com/this-twin-cam-mgb-gt-is-a-badass-result-of-ocd-and-time-1613365867

Posted by: mrfourteen Sep 13 2016, 05:59 AM

back to the top

Posted by: euro911 Sep 14 2016, 02:03 AM

QUOTE(Rotary'14 @ Jul 27 2016, 10:38 AM) *
Would you be interested in a Subi 6 cylinder (EZ30D) with un cut wiring harness, ECU and sensors in trade?
Hey, what you got there, Robert? popcorn[1].gif

Posted by: Mueller Sep 14 2016, 01:02 PM

QUOTE(mrfourteen @ Jul 30 2016, 09:02 AM) *

Thanks but if I could do a swap it would be the 4AG It would be an easy swap with this package.
I just can't do this now. (or ever)
Too bad I did a 4AG in my MGB GT and it was amazing. Have a look.
http://oppositelock.kinja.com/this-twin-cam-mgb-gt-is-a-badass-result-of-ocd-and-time-1613365867


Dang, very nice MGB GT, great job.

The 4AG looks like it would be a neat swap into a 914, killer price for all that, someone is going to get a great deal. Hopefully they post pics once done (it's screaming for ITB's or side draft Webers)

Posted by: euro911 Sep 14 2016, 02:10 PM

agree.gif

Posted by: Korijo914 Sep 14 2016, 02:56 PM

Mrfourteen,

I am interested in your Toyota swap. I am north of Seattle, so I will have someone to come down and meet you.

What kind of trades are you interested in? Let me know what you like.

Thanks for your time!

Korijo914 ( David Cawdrey )

Posted by: Mueller Mar 21 2017, 10:42 AM

did this ever find a good home?

Posted by: ablesnead Mar 21 2017, 07:35 PM

it was on craigs list for 850.00 a month ago ..

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)