Printable Version of Topic

Posted by: BillC Aug 2 2016, 06:01 PM

I just discovered that my relay board is missing chunks of sealant underneath. Considering the thread in the Garage forum http://www.914world.com/bbs2/index.php?showtopic=290924, that might explain my high alternator output (and even if it doesn't, it still needs to be fixed).

Does anyone have a tested-good, or a cleaned & rebuilt relay board that will fit my '73 1.7? Or, can anyone point me to a vendor that sells rebuilt boards? What is a decent price range for a good board? I looked briefly on ebay, and prices were all over the place.

Thanks!

Posted by: Tom_T Aug 2 2016, 06:50 PM

Bill, try Jeff Bowlsby:
http://bowlsby.net/914/WiringHarnesses/

Tom
///////

Posted by: BillC Aug 3 2016, 05:37 AM

QUOTE(Tom_T @ Aug 2 2016, 08:50 PM)

Bill, try Jeff Bowlsby:
http://bowlsby.net/914/WiringHarnesses/

Tom
///////

Posted by: stugray Aug 3 2016, 08:34 AM

I have two.
I can pull them out and get pics tonight.

Posted by: Chris Pincetich Aug 3 2016, 08:54 AM

Bruce Stone should have one (bdstone)
Last year (or year before) I was trouble shooting, he had relay boards but didn't know their quality, so he sent me 6-7. I tested them all, and sent him back the good ones.
Good luck

Posted by: KeithVonLaws Aug 4 2016, 07:32 PM

QUOTE(BillC @ Aug 2 2016, 08:01 PM)