Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB '6' or 911 oil pipe
Posted by: rgalla9146 Aug 4 2016, 10:52 AM
I need a 3 inch section of tubing from an oil plumbing system.
The nipple I need must be steel and must be straight, not curved
The most likely used source would be from a later 911 system.
Takes a 36mm nut
Please see picture.
Used is fine, but not too rusty or pitted.
TIA
Rory
Don't need the nut.
.....gees the pichers are uge.
Attached thumbnail(s)
Posted by: worn Aug 4 2016, 06:23 PM
QUOTE(rgalla9146 @ Aug 4 2016, 08:52 AM) 
I need a 3 inch section of tubing from an oil plumbing system.
The nipple I need must be steel and must be straight, not curved
The most likely used source would be from a later 911 system.
Takes a 36mm nut
Please see picture.
Used is fine, but not too rusty or pitted.
TIA
Rory
Don't need the nut.
.....gees the pichers are uge.
Might have it.
Warren
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)