Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ wtd: 911 front hub grease caps
Posted by: barrym Aug 28 2016, 01:37 AM
as per the title - want a pair of them for my 5 stud 911 conversion ...
PM me ?
Thanks
Posted by: sixaddict Aug 28 2016, 05:10 AM
There are different ones so you may need to determine specifics..
I speak from experience GL
as per the title - want a pair of them for my 5 stud 911 conversion ...
PM me ?
Thanks
Posted by: 914Sixer Aug 28 2016, 02:47 PM
The part number on the hubs will determine which cap you need.
Posted by: barrym Aug 28 2016, 03:06 PM
Thx, I'll grab a part # from the hub, I do know it's a 58mm od hub if that helps ?
Posted by: Larmo63 Aug 28 2016, 07:23 PM
There are "outies" and "innies."
Posted by: barrym Aug 29 2016, 04:31 AM
ok - hub part # is 901 341 605 3R
the grease cap has to slot on the outside of the hub
Posted by: bdstone914 Aug 29 2016, 07:12 AM
ok - hub part # is 901 341 605 3R
the grease cap has to slot on the outside of the hub
Cap 914-341-684-00 $26.50 new Porsche through Pelican. It is the "outie".
Bruce
Posted by: sixaddict Aug 29 2016, 07:42 AM
I am glad Mark and Bruce are competent purveyors of technical information. I knew only that I picked up outies and needed innies. Always great sources here and buying new from Pelican means you will get the right stuff quickly as surprisingly these things are harder to find than one would think they should be .
Posted by: bdstone914 Aug 29 2016, 06:31 PM
I am glad Mark and Bruce are competent purveyors of technical information. I knew only that I picked up outies and needed innies. Always great sources here and buying new from Pelican means you will get the right stuff quickly as surprisingly these things are harder to find than one would think they should be .
Thanks. Have to check with Porsche as to availability. For some reason they get lost. I buy used ones when i canfind them. Do not have any extras. The innies are twice the price.
Bruce
Posted by: bdstone914 Aug 29 2016, 07:36 PM
dupe post
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)