Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB: 911 rear hubs and 914-6 stubs
Posted by: davesprinkle Sep 25 2016, 07:06 PM
5-lug conversion in process. Looking for a pair of early 911 rear hubs and 914-6 stub axles. Thanks.
Posted by: 914Sixer Sep 25 2016, 07:14 PM
I have 911SC rear hubs, stubs (100mm) and axle flanges. I have 2 NOS 944 CV joints and NOS bus CV joints I will throw in with the set. Set up requires 914 axles to be machined 4mm on each end and 5mm spacer on hub.
Posted by: gcrotvik Sep 26 2016, 08:19 AM
QUOTE(914Sixer @ Sep 25 2016, 06:14 PM) 
I have 911SC rear hubs, stubs (100mm) and axle flanges. I have 2 NOS 944 CV joints and NOS bus CV joints I will throw in with the set. Set up requires 914 axles to be machined 4mm on each end and 5mm spacer on hub.
Just an FYI. The spacer is available from Patrick Motorsports. Here's the link: http://www.patrickmotorsports.com/part/914-exterior-rear-wheel-hub-adapter-spacer-set-5-stud-wheel-flange-conversion/
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)