I need a bottom seat cushion fiber board for my seat re upholster job as one of mine is rough and missing the retaining clip in the front. I can post a pic but is basically fiber board with a meal clip in the front. Please let me know what you have...perhaps its best just to make a new one? I need all the pieces prior to dropping off to the upholstery guy. So let me know what you may have
-Robert
Photo added BUMP
I just made my own. Got a small piece of MDS from home depot a piece of 18 gauge metal than used the old one as a template and drilled the holes. For the tab I bent the metal to the proper shape (sortof) and bolted the tab on (with washers on back). It really isn't that hard, trust me if I can do it I am sure anyone can.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)