Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB steel faceplate for radio

Posted by: jrblackbox Oct 24 2016, 03:42 PM

WTB or if you know where I can find one. I am looking for a steel, or just a smooth faceplate,without the basket weave, for a radio, has to have the recessed mounting holes for the knobs too. TIA

Posted by: Mikey914 Oct 24 2016, 05:12 PM

We ma j email the dash face metal and the radio plates. I can sell you just the metal if you want.
Mark

Posted by: Mikey914 Oct 24 2016, 11:34 PM

Sorry for the poor typing on the reply(on the cell phone).
I think we have what you may want. As the late face plates are actually sandwiched inside the vinyl. Making recovering a pain.
This is what I have-
It will work for early and late. All holes are pre cut, for all possible options.

Note the early has the one corner square at the edge by the climate control. We made ours rounded like the late as if it's covered you don't see the corner is not there.

Note we offer the DIN style radio plate, the delete plate, and the OEM style (rectangle with 2 small holes to mount - not shown)

Ours is shown with the red 2 sided tape.

http://shop.914rubber.com/914-Dash-Face-Metal-with-Vinyl-and-radio-plate-914DFM.htm?categoryId=-1

Attached thumbnail(s)