Printable Version of Topic

Posted by: '73-914kid Oct 25 2016, 12:20 PM

I picked up a set of glass tin for my -6, so the OEM tin I was running is for sale.

There is no rust or pitting on the tin, and it was powder coated satin/matte black. It was modified/trimmed to fit the oil line for pressure fed tensioners, and was also modified previously to work with an MFI engine. (Front tin has a pipe brazed into it for the heated air snorkel, and the back tin piece was somewhat butchered to allow a 911 MFI belt cover tin piece to be riveted on.)

All in all, it's a nice set of tin, despite the minor modifications. Easily corrected by a fabricator if desired. The powder coating was done 4 years ago, so there are some minor surface imperfections, but nothing visible once the tin is actually installed. I'd say it's a solid 8.5/10.

Looking to get $550 plus shipping CONUS for the tin. Pictures to come this evening when I get home from work.

Posted by: gms Oct 25 2016, 12:40 PM

email sent

Posted by: don-6 Oct 25 2016, 02:23 PM

PM sent.

Posted by: raynekat Oct 25 2016, 11:51 PM

Put me in line after GMS and DON-6. PM sent.

Posted by: '73-914kid Oct 26 2016, 10:15 AM

[attachmentid=579
409]


Attached thumbnail(s)

Posted by: '73-914kid Oct 26 2016, 10:18 AM

Posted by: '73-914kid Oct 27 2016, 07:16 AM

Thanks for the interest everyone. The tin is SPF to Glenn.