Trying to clear out some of the massive collection. As per the rules, I'll post everything to this thread. If it's still listed here, it's still for sale.
All prices are not including shipping.
Package deals welcome.
Extra pictures of any parts available upon request.
Added http://www.914world.com/bbs2/index.php?s=&showtopic=298555&view=findpost&p=2423707.
Left front lower engine tins. Parts are dusty in the picture.
Powdercoated satin black.
Qty Available: 10
Price: $30each
Powdercoated gloss black.
Qty Available: 2
Price: $30each
Powdercoated gloss black !!! Missing 1 Nut, still usable!!!
Qty Available: 1
Price: $25
Attached image(s)
Right front lower engine tins (over oil cooler), doesn't include rubber seal. Parts are dusty in the picture.
Powdercoated satin black.
Qty Available: 6
Price: $30each
Powdercoated satin black. !!! Missing small tab, still usable!!!
Qty Available: 1
Price: $25each
Attached image(s)
Left Lower Engine Tins. Parts are dusty in the picture.
For tail-shifter transmissions.
Powdercoated gloss black.
Qty Available: 1
Price: $30each
For tail-shifter transmissions.
Powdercoated satin black.
Qty Available: 1
Price: $30each
Attached image(s)
Right Lower Engine Tins. Parts are dusty in the picture.
Powdercoated satin black.
Qty Available: 4
Price: $30each
Powdercoated gloss black.
Qty Available: 1
Price: $30each
Attached image(s)
Set of lower engine tins for 75-76 exhaust. Parts are dusty in the picture.
Powdercoated gloss black. Surface scratching looks worse in the pictures.
Qty Available: 1
Price: $25 both
I'm actually not 100% sure these are 75-76 tins, they could be bus or 411/412. Can anyone confirm?
Attached image(s)
Heater J-Tubes. Mounting tabs intact. Parts are dusty in the picture.
Powdercoated satin black.
Qty Available: 2
Price: $35 each
Attached image(s)
Alternator tin. Parts are dusty in the picture.
Powdercoated satin black.
Qty Available: 3
Price: $30each
Attached image(s)
Right side heater S-Tubes. Parts are dusty in the picture.
Powdercoated satin black.
Qty Available: 2
Price: $30each
Attached image(s)
Heater S-Tube Set. Parts are dusty in the picture.
Original paint in good condition.
Qty Available: 1
Price: $60
Attached image(s)
Engine front left tin. Parts are dusty in the picture.
Powdercoated satin black.
Qty Available: 4
Price: $30each
Attached image(s)
Engine front right tin. Parts are dusty in the picture.
Powdercoated satin black.
Qty Available: 2
Price: $40
Attached image(s)
1.7/1.8 Engine left side top tin. Parts are dusty in the picture.
Gloss black looks good, but I don't know if it's paint or powdercoat. Some scratching/chipping, some 'frosty' areas.
Qty Available: 1
Price: $20
Attached image(s)
Single early 1.7 engine top tin w/ intake preheater opening. Parts are dusty in the picture.
Powdercoated satin black.
Qty Available: 1
Price: $35
Attached image(s)
Rear engine tin. Parts are dusty in the picture.
Powdercoated satin black.
Qty Available: 1
Price: $40each
Attached image(s)
I will take a left lower engine tin for the side shifter tranny. I am in eastern PA. Let me know the damage.
PM sent.
Three ECU of unknown history.
72/73 1.7 ECUs. I have two of these.
0 280 000 037
022 906 021E
75/76 2.0 ECU. One of those.
0 280 000 052
039 906 021A
Asking $60 each.
Attached thumbnail(s)
Decel valves. $5 each or $15 for all of them.
Attached image(s)
1.8 vacuum adjusted fuel pressure regulator.
$10
Attached thumbnail(s)
1.7 fuel injection harness. Untested but has all connectors.
$45
Attached thumbnail(s)
Mark....I.ll take the S Tubes and the best looking Dcel valve you have.
I would like a set of the powder coated S tubes if a set is still available.
Responded and updated the posts.
if you have full set of s-tubes, j- tubes and straight tube that goes to flapper boxes I would consider buying the set. - phil
Mark,
I'm need of a good decal valve
how many do you have left
I'm thinking I should buy what you have left...
thanks
brant
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)