Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FS Gates green stripe 1 1/4" hose
Posted by: Chris914n6 Dec 4 2016, 02:44 AM
See latest post.50ft box about $185-190 at the usual online places. Half is a little more than needed but it's cheaper than local by a bunch.Shipping either to or from Las Vegas 89121.Not in a hurry but do need to install it before April.
-----------
On the wish list:
Me - Vegas
ThePaintedMan - Florida
madmax914 - Oregon
BigFour1973 - Socal
BuddyV - Socal
mgp4591 - SLC
Posted by: 76-914 Dec 4 2016, 12:05 PM
50ft box about $185-190 at the usual online places. Half is a little more than needed but it's cheaper than local by a bunch.
Shipping either to or from Las Vegas 89121.
Not in a hurry but do need to install it before April.
Ahah! That means you'll be at Rt 66.
Posted by: Chris914n6 Dec 19 2016, 08:34 PM
bi-monthly 
Posted by: ThePaintedMan Dec 20 2016, 08:40 AM
Sounds good to me Chris. I need to buy some for the EG33. I'm pretty sure 1 1/4 is what I need.
Posted by: madmax914 Dec 20 2016, 01:01 PM
Chris, who are you buying it through? I'll be needing some her shortly.
Posted by: BigFour1973 Dec 20 2016, 01:32 PM
Chris, who are you buying it through? I'll be needing some her shortly.
https://www.amazon.com/Gates-28445-Heater-Hose/dp/B000CRHLF8
Madmax914- Id be up to go halves on one of these with you. 50ft roll 1 1/4
Posted by: BuddyV Dec 20 2016, 01:47 PM
Is this for a SBC V8 application?
.... if so, I would be in for half an order. I have some old hose in my used kit..... probably best to start fresh.
Posted by: Chris914n6 Dec 22 2016, 11:58 PM
I forgot to sub to my own thread 
Rockauto currently $172.50 + $10 shipping. It usually comes out of Phoenix for me so no tax.
West coast obviously cheaper for reshipping.
I need to also get a 1.25" to 1.5" flex hose after I figure out which length fits better, so I figured I'd order it. Probably in a week or two.
Doesn't matter to me where the other half goes if the coastal guys want to wheel and deal with each other. As long as I don't have to hold on to it for too long.
Posted by: Chris914n6 Dec 23 2016, 12:03 AM
Is this for a SBC V8 application?
.... if so, I would be in for half an order. I have some old hose in my used kit..... probably best to start fresh.
i think the RH kit does 1" in and 1.25" out, about 10ft each way. Depends on you rad and fittings if 1.25" makes sense.
Posted by: mgp4591 Dec 23 2016, 12:50 AM
I'm up for splitting an order with someone. I'd volunteer to drive down to Vegas Chris, but you remember how the last trip went... 
Posted by: Chris914n6 Feb 18 2017, 12:26 AM
Got my box of hose.
Box size 28 x 28 x 8 & 15 lbs. Might be able to get it in a smaller box once I get my half pulled out, but it doesn't bend so good.
Fedex Ground to FL ~ $54
SLC Utah ~ $27
That's with my account. Honestly, more than I expected.
Half of $172.50 for 25ft plus shipping, or maybe 2x 13ft.
Can bring to Route66 or hold if someone is driving thru Vegas.
My 35mm/ 1 3/8" Toyota rad and Nissan engine outlets needed lube to get it on, so not quite a good fit like someone had led on 
Posted by: mgp4591 Feb 18 2017, 04:17 AM
Chris, let me make some measurements to see if it will fit my radiator without killing it. I should be able to get to it tomorrow and let you know.
Posted by: dyckster Feb 18 2017, 09:37 AM
I'm interested in 20feet or so. montana
Posted by: timothy_nd28 Feb 18 2017, 08:57 PM
If the above falls through, I'll buy your other half.
Posted by: mgp4591 Feb 22 2017, 11:32 PM
PM sent...
Posted by: Chris914n6 Mar 5 2017, 10:57 PM
Sold to Mike - mgp4591 whatever that means
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)