Printable Version of Topic

Posted by: mb911 Dec 8 2016, 06:53 AM

Everyone I thought it would be nice to start a give away thread for Christmas. Here is what I would like to see happen. I will offer up an item to get things started and the 1st person to say they want it has to reply on the thread (no pms) the person that says they want it only has to pay shipping.

Anyone and everyone should also put their items they want to give away in this thread as well and the cycle can start all over again.. I have seen this work in many forums before.

I will start..

These parts need a new home and I will ship usps probably flat rate large box pricing..let me know who wants them.

Posted by: bdstone914 Dec 8 2016, 07:32 AM

I would like the rain tray funnels and will post a picture with a few free parts .
Merry Christmas

Pair of door strikers correct for 72-76. fits all years
Set of FI injector rails and hold down clamps. Can also be hung on tree
Battery hold down clamp.



Attached thumbnail(s)

Posted by: mb911 Dec 8 2016, 07:56 AM

QUOTE(bdstone914 @ Dec 8 2016, 05:32 AM)

Posted by: AZAircooled Dec 8 2016, 09:06 AM

Attached thumbnail(s)

Posted by: Sea Dragon 914 Dec 8 2016, 10:18 AM

QUOTE(AZAircooled @ Dec 8 2016, 07:06 AM)

Posted by: mb911 Dec 8 2016, 10:21 AM

QUOTE(Sea Dragon 914 @ Dec 8 2016, 08:18 AM)

QUOTE(AZAircooled @ Dec 8 2016, 07:06 AM)

I would like the fog light grills. Please PM me the amount for shipping to Pleasant Hill, CA 94523.

Thanks!

Posted by: mb911 Dec 8 2016, 02:38 PM

Grills and funnels spoken for.

Posted by: tygaboy Dec 8 2016, 04:03 PM

This is awesome! I have a ton of misc stuff that I'll post here ASAP. It may be the weekend before I can get pics.

Posted by: jesse7flying Dec 9 2016, 02:12 PM

I'll take the battery hold down plate. I'll post a freebie within the next couple of days.
Regards--Jesse

Posted by: PanelBilly Dec 9 2016, 06:51 PM

I've got a bag of these push pins. I got them for the threshold plates, but ended up using black rivets instead. Best par of the deal is I'll even pay for postage (snail mail).

First to claim wins the prize


Video link REMOVED BY ADMIN

Posted by: barefoot Dec 11 2016, 05:58 PM

Free to good home:
pair of heat ducts between H/E's & flapper valves, kinda crusty but no rust holes.
Will fit medium flat rate USPS box.

one defroster duct with little chunk bit out of it, see photo, will fit medium flat rate USPS box

4 2L 94mm cylinders and pistons form a GA code motor, cylinders rusty and will need boring to 96mm presume these are OE parts, don't know shipping on these
You pay shipping only, paypal to friends & family.

Posted by: rfinegan Dec 11 2016, 06:25 PM

I will take the Fuel rails and injector hold downs...I will dig in my spar parts tomorrow and see what goodies I can find

-Robert


Spare tire hold down GONE to Bruce
antenna
2 fire wall bushing (early and late)
washer jug cap
trunk lid pivots
fresh air elbow
clutch trunion
chipped shifter nice shift pattern
ground cable
horn grommet
shifter boot ??
throw out bearing sleeve (ok if flipped ) or polished


Attached thumbnail(s)

Posted by: flat4guy Dec 11 2016, 07:38 PM

I would like the door strikers....please.
I am a newer owner but will see if I have any spares in my "box" that came with the car.

Posted by: bdstone914 Dec 12 2016, 07:30 AM

QUOTE(flat4guy @ Dec 11 2016, 07:38 PM)

Posted by: rpc Dec 12 2016, 01:26 PM

I have a set of six eyebrow grommets from 914Rubber, free to a good home (shipping included). I ordered a second set by mistake.

Posted by: mb911 Dec 12 2016, 01:39 PM

My gifts have shipped..

Posted by: Shadowfax Dec 12 2016, 04:12 PM

Here's my contribution.
All fuel-related parts (injectors, AAR, fuel pump) are from an early '74 2.0 and should be considered cores. Kienzle clock is also from an early '74 2.0 and is not working. Rev-limiting rotor has less than 100 miles on it and should be in good shape. The 914rubber rocker panel rivets are unused.

Update: Fuel pump, clock, horn contact ring and window crank are gone.







P.S. Great idea, mb911. Thanks for starting the thread. Merry Christmas!

Posted by: 914bub Dec 12 2016, 05:07 PM

QUOTE(Shadowfax @ Dec 12 2016, 02:12 PM)

Here's my contribution.
All fuel-related parts (injectors, AAR, fuel pump) are from an early '74 2.0 and should be considered cores. Kienzle clock is also from an early '74 2.0 and is not working. Rev-limiting rotor has less than 100 miles on it and should be in good shape. The 914rubber rocker panel rivets are unused.







P.S. Great idea, mb911. Thanks for starting the thread. Merry Christmas!

Posted by: rfinegan Dec 12 2016, 05:44 PM

75-76 heat exchangers


Attached thumbnail(s)

Posted by: Mtntrader Dec 12 2016, 07:46 PM

QUOTE(PanelBilly @ Dec 9 2016, 05:51 PM)

I've got a bag of these push pins. I got them for the threshold plates, but ended up using black rivets instead. Best par of the deal is I'll even pay for postage (snail mail).

First to claim wins the prize


Video link REMOVED BY ADMIN

Posted by: Optimusglen Dec 13 2016, 09:07 AM

Item #1 QTY 1 available
I've got a pair of 1.7 heads that are pretty much unuseable. I was going to scrap them but if someone has a need, they're yours. One was gone through pretty well and I was going to try to use it until I saw the second one and opted out.




Item #2 QTY 3 available - edit - db9146 claimed one bundle, 914bub claimed another bundle, jtprettyman claimed the third bundle.
I'll bundle together a few of my 11x17 illustrations and send them to you. Bundles may include some of the following, or may include other illustrations not shown, it's a surprise and you wont know until Christmas morning (or whenever you decide to open the package) I will make sure each bundle has at least 2 914's

Posted by: db9146 Dec 13 2016, 09:16 AM

oh, oh, I need some more 914 artwork!!!

Optimusglen, I'd appreciate Offer #2.

I'll PM info.

In consideration of OptimusGlen's generous offer, I'll throw out a new 914-4 accelerator cable for anyone free for the claiming (including shipping).



Merry Christmas!!

Posted by: jtprettyman Dec 13 2016, 12:57 PM

Item #2 QTY 3 available - edit - db9146 claimed one bundle, 914bub claimed another bundle, 1 left.
I'll bundle together a few of my 11x17 illustrations and send them to you. Bundles may include some of the following, or may include other illustrations not shown, it's a surprise and you wont know until Christmas morning (or whenever you decide to open the package) I will make sure each bundle has at least 2 914's

I'd love a bundle of the 914 illustrations!. I have a set of 1.8 FI seals and gaskets I'll post up for my offering this evening when I get home.

Posted by: raynekat Dec 13 2016, 09:03 PM

Here's my give-away for Christmas.
Just pay the shipping....and hopefully post something someone else might need....
All parts clean and in very good condition:


Pair of tie rod steering bellows. Rubber soft and in great condition.


Windshield washer bottle with the tubing. The decal is in perfect condition. Nice patina. Given to localboy.


Pair of front hub grease caps painted black.


Cigarette lighter. Very clean and in great condition with a new center cap. Given to Jesse.


Pair of front brake heat shields freshly powder coated satin black. Given to Barefoot


Pick one, pay the shipping and it's on it's way to you.
Pay if forward please.

Posted by: jesse7flying Dec 13 2016, 10:00 PM

QUOTE(raynekat @ Dec 13 2016, 09:03 PM)

Here's my give-away for Christmas.
Just pay the shipping....and hopefully post something someone else might need....
All parts clean and in very good condition:


Pair of tie rod steering bellows. Rubber soft and in great condition.


Windshield washer bottle with the tubing. The decal is in perfect condition. Nice patina.


Pair of front hub grease caps painted black.


Cigarette lighter. Very clean and in great condition with a new center cap.


Pair of front brake heat shields freshly powder coated satin black.



Pick one, pay the shipping and it's on it's way to you.
Pay if forward please.

Posted by: Localboy808 Dec 13 2016, 11:14 PM

QUOTE(raynekat @ Dec 13 2016, 10:03 PM)

Here's my give-away for Christmas.
Just pay the shipping....and hopefully post something someone else might need....
All parts clean and in very good condition:


Pair of tie rod steering bellows. Rubber soft and in great condition.


Windshield washer bottle with the tubing. The decal is in perfect condition. Nice patina.


Pair of front hub grease caps painted black.


Cigarette lighter. Very clean and in great condition with a new center cap.


Pair of front brake heat shields freshly powder coated satin black.


Pick one, pay the shipping and it's on it's way to you.
Pay if forward please.

Posted by: mgp4591 Dec 14 2016, 12:12 AM

QUOTE(db9146 @ Dec 13 2016, 08:16 AM)

oh, oh, I need some more 914 artwork!!!

Optimusglen, I'd appreciate Offer #2.

I'll PM info.

In consideration of OptimusGlen's generous offer, I'll throw out a new 914-4 accelerator cable for anyone willing to pay shipping.



Merry Christmas!!

Posted by: barefoot Dec 14 2016, 10:44 AM

QUOTE(raynekat @ Dec 13 2016, 10:03 PM)

Here's my give-away for Christmas.
Just pay the shipping....and hopefully post something someone else might need....
All parts clean and in very good condition:

Pair of front brake heat shields freshly powder coated satin black.


Pick one, pay the shipping and it's on it's way to you.
Pay if forward please.

Posted by: jtprettyman Dec 14 2016, 11:27 AM

Here is my Christmas give away offering. I have a set of fuel injection seals I had picked up for my 74 1.8 tetanus monster. Let me know if anyone needs these.

Posted by: db9146 Dec 14 2016, 11:31 AM

Come on guys, let's pick up the pace. I like this. Great idea.

Needs to be a new 914World tradition.

Posted by: barefoot Dec 14 2016, 03:17 PM

QUOTE(barefoot @ Dec 11 2016, 06:58 PM)

Posted by: mb911 Dec 14 2016, 05:29 PM

QUOTE(db9146 @ Dec 14 2016, 09:31 AM)

Posted by: Pacqs Dec 15 2016, 01:36 AM

QUOTE(Optimusglen @ Dec 13 2016, 10:07 AM)

Item #1 QTY 1 available
I've got a pair of 1.7 heads that are pretty much unuseable. I was going to scrap them but if someone has a need, they're yours. One was gone through pretty well and I was going to try to use it until I saw the second one and opted out.




Item #2 QTY 3 available - edit - db9146 claimed one bundle, 914bub claimed another bundle, jtprettyman claimed the third bundle.
I'll bundle together a few of my 11x17 illustrations and send them to you. Bundles may include some of the following, or may include other illustrations not shown, it's a surprise and you wont know until Christmas morning (or whenever you decide to open the package) I will make sure each bundle has at least 2 914's

Posted by: PanelBilly Dec 15 2016, 11:55 AM

I think this is a rare part, but its yours if you want one. Its the connector for a 73 2.0 temperature sensor to wiring harness.
If I recall correctly, each year/engine size has a different resistor built into the wire. Anyways, it should fit in a padded envelope,
so there's no charge. (Don't be listing it for sale, if I give it to you!)

Posted by: Mowog4 Dec 15 2016, 06:27 PM

Here are the things I am adding for the Christmas give away: Ash Tray, Rear Reflector, You pay shipping

Posted by: Samoroso72 Dec 15 2016, 07:02 PM

QUOTE(Mowog4 @ Dec 15 2016, 04:27 PM)

Here are the things I am adding for the Christmas give away: Ash Tray, Rear Reflector, You pay shipping

Posted by: Samoroso72 Dec 15 2016, 07:08 PM

I will pick out something from my stash and post it tomorrow

Great idea!

Posted by: Samoroso72 Dec 17 2016, 06:51 AM

Free Haynes manual and two vintage PCA decals. Shipping included

Posted by: kaiserms Dec 17 2016, 04:39 PM

QUOTE(Shadowfax @ Dec 12 2016, 05:12 PM)

Here's my contribution.
All fuel-related parts (injectors, AAR, fuel pump) are from an early '74 2.0 and should be considered cores. Kienzle clock is also from an early '74 2.0 and is not working. Rev-limiting rotor has less than 100 miles on it and should be in good shape. The 914rubber rocker panel rivets are unused.

Update: Fuel pump and clock are gone.







P.S. Great idea, mb911. Thanks for starting the thread. Merry Christmas!

Posted by: mb911 Dec 18 2016, 07:29 PM

I will search and see what else I may have to give away..

Posted by: 914bub Dec 18 2016, 10:38 PM

I'm posting a few tomorrow after work. Just need to pop a few pix.

Posted by: 11tenths Dec 19 2016, 11:11 AM

Shadowfax-

I would love that horn contact ring.

PM me the shipping and I'll paypal you.

Merry Christmas!

Cheers-

-Harry

Posted by: barefoot Dec 19 2016, 02:38 PM

QUOTE(barefoot @ Dec 14 2016, 11:44 AM)

QUOTE(raynekat @ Dec 13 2016, 10:03 PM)

Here's my give-away for Christmas.
Just pay the shipping....and hopefully post something someone else might need....
All parts clean and in very good condition:

Pair of front brake heat shields freshly powder coated satin black.


Pick one, pay the shipping and it's on it's way to you.
Pay if forward please.

I'll take the brake heat shields, shipping to 29420
Barefoot

Posted by: rfinegan Dec 19 2016, 03:29 PM

I got my injector parts from Bruce Stone...if its from Bruce, you know its going to be NICE!

Merry Christmas

-Robert

Posted by: raynekat Dec 19 2016, 08:30 PM

QUOTE(barefoot @ Dec 19 2016, 12:38 PM)

QUOTE(barefoot @ Dec 14 2016, 11:44 AM)

QUOTE(raynekat @ Dec 13 2016, 10:03 PM)

Here's my give-away for Christmas.
Just pay the shipping....and hopefully post something someone else might need....
All parts clean and in very good condition:

Pair of front brake heat shields freshly powder coated satin black.


Pick one, pay the shipping and it's on it's way to you.
Pay if forward please.

I'll take the brake heat shields, shipping to 29420
Barefoot

WOW got my brake shields today, very nice and well packaged
Thanks lots !!

Posted by: flat4guy Dec 19 2016, 08:54 PM

Got my latches from Bruce - parts look new and packaged very well - THANK YOU.

Posted by: slammin Dec 19 2016, 09:24 PM

merry christmas very kind of you for giving the parts away god bless slammin

Posted by: Txbentleyboy Dec 21 2016, 08:54 PM

QUOTE(Samoroso72 @ Dec 17 2016, 06:51 AM)

Free Haynes manual and two vintage PCA decals. Shipping included

Posted by: Txbentleyboy Dec 21 2016, 08:54 PM

QUOTE(Samoroso72 @ Dec 17 2016, 06:51 AM)

Free Haynes manual and two vintage PCA decals. Shipping included

Posted by: PanelBilly Dec 21 2016, 11:03 PM

QUOTE(Mtntrader @ Dec 12 2016, 05:46 PM)

QUOTE(PanelBilly @ Dec 9 2016, 05:51 PM)

I've got a bag of these push pins. I got them for the threshold plates, but ended up using black rivets instead. Best par of the deal is I'll even pay for postage (snail mail).

First to claim wins the prize


Video link REMOVED BY ADMIN

Hi,
I'd love to have those little bitty plastic rivets! I was just talking to Santa about some of those.
Thanks, and Merry Christmas!

Scott

Posted by: kahluver Dec 22 2016, 09:25 AM

Count me in! Anyone need a nice set of strut housings / spindles off of a 1974? These are in great shape with no issues. Just pay shipping and they are yours. PM me if you're interested.

Posted by: jesse7flying Dec 22 2016, 12:32 PM

Got my stuff from Bruce and Kat. Thanks fellas and Merry Christmas to all!
Jesse

Posted by: Keith914 Dec 22 2016, 01:33 PM

Christmas gifts , free except for shipping (or free pickup):



Attached image(s)

Posted by: Keith914 Dec 22 2016, 01:45 PM

One more Christmas gift: like new bra, came with purchase of car, never used, free except for shipping.

Posted by: rpc Dec 22 2016, 03:13 PM

I'm happy to relieve you of the funnels and drain tubes. I'll send a PM.

QUOTE(Keith914 @ Dec 22 2016, 02:33 PM)

Christmas gifts , free except for shipping (or free pickup):

Posted by: Mowog4 Dec 22 2016, 08:54 PM

Here is another contribution:

These are dash pieces I had covered in carbon fiber by a local guy. Much heavier, but they will look cool (I think). They are going to need to be scuffed and shot with a quote of clear coat

Next item is a set of driving lights I bought (I actually bought two, this is easier than returning them to amazon:



You pay shipping, unfortunately they won't ship til after Christmas.
Merry Christmas
Ed

Posted by: Pacqs Dec 22 2016, 10:20 PM

QUOTE(Mowog4 @ Dec 22 2016, 09:54 PM)

Here is another contribution:

These are dash pieces I had covered in carbon fiber by a local guy. Much heavier, but they will look cool (I think). They are going to need to be scuffed and shot with a quote of clear coat

Next item is a set of driving lights I bought (I actually bought two, this is easier than returning them to amazon:



You pay shipping, unfortunately they won't ship til after Christmas.
Merry Christmas
Ed

Posted by: Pacqs Dec 22 2016, 10:23 PM

Ill add this engman pasenger side (doesnt have hardware)
To the goveaway


Attached thumbnail(s)

Posted by: Mowog4 Dec 22 2016, 11:12 PM

Packs gets the dash pieces, will ship next week

QUOTE(Pacqs @ Dec 22 2016, 09:20 PM)

QUOTE(Mowog4 @ Dec 22 2016, 09:54 PM)

Here is another contribution:

These are dash pieces I had covered in carbon fiber by a local guy. Much heavier, but they will look cool (I think). They are going to need to be scuffed and shot with a quote of clear coat

Next item is a set of driving lights I bought (I actually bought two, this is easier than returning them to amazon:



You pay shipping, unfortunately they won't ship til after Christmas.
Merry Christmas
Ed

Ill take the carbon fiber parts will send you a pm with my address

Posted by: roadster fan Dec 22 2016, 11:26 PM

QUOTE(Pacqs @ Dec 22 2016, 08:23 PM)

Posted by: sb914 Dec 23 2016, 07:27 AM

Ill take the pilot lights

Posted by: 11tenths Dec 23 2016, 02:40 PM

Got my horn ring from "Shadowfax" today. He even paid the shipping!

Thanks Pedro- Merry Christmas!

-Harry

Posted by: Mowog4 Dec 23 2016, 03:06 PM

They are yours, send me a PM with your address.

QUOTE(sb914 @ Dec 23 2016, 06:27 AM)

Posted by: sb914 Dec 23 2016, 03:55 PM

QUOTE(Mowog4 @ Dec 23 2016, 01:06 PM)

They are yours, send me a PM with your address.

QUOTE(sb914 @ Dec 23 2016, 06:27 AM)

Ill take the pilot lights

Posted by: mgp4591 Dec 23 2016, 08:30 PM

I got my throttle cable a few days ago from Dee - he paid the shipping too!
This is my offering except I'm keeping the bolts and washers because I'll need them for the bigger axles I'll be running.
These axles are in good shape for the !.7 the were attached to - they're just a bit dirty!
They're free to someone who needs them for the shipping cost only. Merry Christmas!

Posted by: Shadowfax Dec 24 2016, 11:28 AM

QUOTE(11tenths @ Dec 23 2016, 02:40 PM)

Got my horn ring from "Shadowfax" today. He even paid the shipping!

Thanks Pedro- Merry Christmas!

-Harry

Posted by: barefoot Dec 24 2016, 02:43 PM

QUOTE(barefoot @ Dec 11 2016, 06:58 PM)

Posted by: sb914 Dec 24 2016, 06:12 PM

I have a speedo and seat rail with handle

Posted by: carl k Dec 24 2016, 07:03 PM

KevinW tightened me up with a torsion bar end adjuster screw that I needed. He sent the whole thing so if anyone needs just the adjuster without a screw, it's yours for the asking. Overall good shape, good splines.





Merry Christmas,
Carl K.


Attached thumbnail(s)

Posted by: tweet Dec 25 2016, 12:09 AM

This was a terrific idea, but Christmas only comes once a year. Hey admins, is it possible to continue this generosity throughout the year? Perhaps we can add a
"Swap-Me" forum. We all have parts we need and parts we can let go of. No way to get in trouble with your significant other when they find out you are getting rid of stuff they consider junk you'll never use. Also, you are getting parts practically free; everyone can appreciate FREE.

Posted by: R_u_dd Dec 25 2016, 10:52 AM

I will take the driving lights. Thank You and Merry Christmas.

Pm On the way.

Woops, I guess I'm second on the list.

Posted by: Mowog4 Dec 25 2016, 09:16 PM

Sorry, too late. The lights and dash are on their way to their respective owners.

QUOTE(R_u_dd @ Dec 25 2016, 09:52 AM)

Posted by: Andyrew Dec 27 2016, 11:59 AM

I'll post some stuff tonight. I have quite a lot that are gathering dust and would rather see go to someone.

Posted by: Shadowfax Dec 8 2018, 01:08 PM

Can’t believe it’s been two years since we did this. I’ll try to get it going again. Four NGK BP6ES (7333) spark plugs. Had these in for less than 1000 miles. Cleaned them up a bit and they should work fine. Also have a turn signal housing. It works but the top screw hole needs to be repaired. Yours for the cost of shipping

Posted by: Shadowfax Dec 8 2018, 01:09 PM

Posted by: mb911 Dec 8 2018, 04:48 PM

I will look and see what I have again.. Thanks for bumping this..

Posted by: barefoot Dec 10 2018, 05:09 PM

Big mother wing had shipping cost of $110 previously now in primer ready for your color.
Free to god home just pay shipping





Bolts to trunk lid:

Posted by: Noonan Dec 11 2018, 12:48 PM

QUOTE(raynekat @ Dec 13 2016, 08:03 PM)

Here's my give-away for Christmas.
Just pay the shipping....and hopefully post something someone else might need....
All parts clean and in very good condition:


Pair of tie rod steering bellows. Rubber soft and in great condition.


Windshield washer bottle with the tubing. The decal is in perfect condition. Nice patina. Given to localboy.


Pair of front hub grease caps painted black.


Cigarette lighter. Very clean and in great condition with a new center cap. Given to Jesse.


Pair of front brake heat shields freshly powder coated satin black. Given to Barefoot


Pick one, pay the shipping and it's on it's way to you.
Pay if forward please.

Posted by: 1970-1914 Dec 11 2018, 01:13 PM

QUOTE(Noonan @ Dec 11 2018, 10:48 AM)

QUOTE(raynekat @ Dec 13 2016, 08:03 PM)

Here's my give-away for Christmas.
Just pay the shipping....and hopefully post something someone else might need....
All parts clean and in very good condition:


Pair of tie rod steering bellows. Rubber soft and in great condition.


Windshield washer bottle with the tubing. The decal is in perfect condition. Nice patina. Given to localboy.


Pair of front hub grease caps painted black.


Cigarette lighter. Very clean and in great condition with a new center cap. Given to Jesse.


Pair of front brake heat shields freshly powder coated satin black. Given to Barefoot


Pick one, pay the shipping and it's on it's way to you.
Pay if forward please.

I'll take the front hub grease caps off your hands.

Posted by: edrotol Dec 11 2018, 01:40 PM

QUOTE(Keith914 @ Dec 22 2016, 12:45 PM)

One more Christmas gift: like new bra, came with purchase of car, never used, free except for shipping.

Posted by: db9146 Dec 11 2018, 02:28 PM

I think we need to start a fresh thread for 2018.......seems the old thread is causing some confusion.

Posted by: Noonan Dec 11 2018, 03:43 PM

QUOTE(1970-1914 @ Dec 11 2018, 12:13 PM)

QUOTE(Noonan @ Dec 11 2018, 10:48 AM)

QUOTE(raynekat @ Dec 13 2016, 08:03 PM)

Here's my give-away for Christmas.
Just pay the shipping....and hopefully post something someone else might need....
All parts clean and in very good condition:


Pair of tie rod steering bellows. Rubber soft and in great condition.


Windshield washer bottle with the tubing. The decal is in perfect condition. Nice patina. Given to localboy.


Pair of front hub grease caps painted black.


Cigarette lighter. Very clean and in great condition with a new center cap. Given to Jesse.


Pair of front brake heat shields freshly powder coated satin black. Given to Barefoot


Pick one, pay the shipping and it's on it's way to you.
Pay if forward please.

I'll take the front hub grease caps off your hands.

I am guessing you didn’t notice that post was from 2016....