Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB...for daughter's 1.8....wants more loving
Posted by: porbmw Dec 14 2016, 10:33 PM
YUP, by the time her car is done, seems every piece will have been repaired or replaced...
And in the 6 years of getting/keeping hers going...mine sits awaiting assembly 
Anyway, 'nuf whining
Am in the hunt for:
a)muffler for 1.8. I believe they are unique to the 1.8...and ASSUME that they are the same for both years?
b)shifter sleeve on the rearof the shifter rod...it MAY be 91442424102, if that helps
c)wiper switch/lever that mounts on column....
Thanks
Paul
Posted by: bdstone914 Dec 15 2016, 09:01 AM
74 and 75 1.8 use a different muffler due to the type of heat exchangers. The 74 is a one year only muffler with larger pipes than the 1.7. The outlet tip bolts to the end of the muffler unlike the 1.7 which has a couple of configs. I have one muffler and will check to see what it is.
And I have the cup for the end of the rear side shift rod.
Bruce
Posted by: porbmw Dec 16 2016, 08:57 AM
74 and 75 1.8 use a different muffler due to the type of heat exchangers. The 74 is a one year only muffler with larger pipes than the 1.7. The outlet tip bolts to the end of the muffler unlike the 1.7 which has a couple of configs. I have one muffler and will check to see what it is.
And I have the cup for the end of the rear side shift rod.
Bruce
Thanks, Bruce, for the info...and for looking.
And, as a cautionary tale....I bought a nice set of used stainless steel heat exchangers.
I am hearing "rumblings" that they may also be an issue with mating a muffler to a 74 1.8, so perhaps be forewarned....
Will update as the saga progresses.
Posted by: malcolm2 Dec 16 2016, 09:19 PM
I bought a new turn signal lever for a super beetle. I would suppose the wiper lever would be the same too.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)