Printable Version of Topic

Posted by: motomoss Dec 16 2016, 12:33 PM

This is a custom made engine test stand specifically for a 914 motor. Uses stock engine and trans mounting locations. Engine support brace included as shown in photos. Motor drops in from above with plenty of clearance for exhaust either stock or headers. Switch board is wired to run pumps for fuel injection or carburetor. All wires are labeled and go to stock engine terminals. Very sturdy, roll-able, and built at a nice height for test run and tune. Battery shown not included. Getting out of 914's, so no longer need it. Item is located in Southwest MI, close to Chicago. Asking price is $550. Click links below for more photos and video.

Please send PM if interested.

Video of test stand in use (before being epoxy coated) https://youtu.be/eB-RtUbXllc

More Photos http://s1020.photobucket.com/user/justinmoss101/library/Engine%20Test%20Stand


Attached thumbnail(s)

Posted by: motomoss Dec 16 2016, 12:51 PM

test

Posted by: N_Jay Dec 16 2016, 01:46 PM

Dies it have a connection for the stock engine harness, or do you have to connect each circuit separately?

Posted by: euro911 Dec 16 2016, 02:10 PM

Very nice.

Posted by: JOEPROPER Dec 16 2016, 02:18 PM

Doesn't look like you can take it apart for shipping purposes... Very nice none-the -less. Looks like an easy way to set up an engine. The work is already done. Nice.

Posted by: JOEPROPER Dec 16 2016, 02:20 PM

Actually, you could cut it in half and weld it back together or bolt it together pretty easily. PM coming.

Posted by: motomoss Dec 16 2016, 02:45 PM

Its not set up at this point to plug in the stock brain box. You would have to provide your own brain box and relay board, but power is there and could be easily wired to the back of the switch panel.

Posted by: N_Jay Dec 16 2016, 03:42 PM

I wasn't thinking so much of the FI harness as much as the main harness, starter connections and Alt connections.

Posted by: motomoss Dec 17 2016, 10:37 PM

Sold,

Thanks Garold