Printable Version of Topic

Posted by: fduval Jan 10 2017, 10:27 AM

Here is a nice clutch ass`y . Includes

original Sachs clutch disk 215 mm with plenty of meat left
original Sachs pressure plate in very good condition
Release bearing ( not pictured)
Flywheel .
All this for $ 200 USD plus shipping

I can split if needed

Posted by: fduval Jan 30 2017, 12:13 PM

Bump

Posted by: fduval Feb 25 2017, 06:33 AM

Week end bump !

Posted by: bdstone914 Feb 25 2017, 08:15 AM

You may have better success selling it by breaking out the flywheel. Also show the other face of the flywheel with how much material is left. Look at the outer edge of the working surface to see if it drops down. If there is little to no drop it is out of spec. I can post a picture to clarify.

New genuine flywheels are over $300 and Chinese are about $100. I would value a good used one at $100.
Any estimate of what shipping to the U.S. from Canada would cost? I may be interested in the flywheel.

Bruce

Posted by: fduval Feb 25 2017, 10:43 AM

Hi , I cleaned a small area of the flywheel ( see picture ) and there is a good drop at the edge. let me know , regards
Shipping to Calif is $ 53.00 for a 16 pounds package.

Francois

Posted by: bdstone914 Feb 25 2017, 11:40 PM

thanks but i just got one today for free. That should be worth $100 to someone. Shipping is kind of a killer.