Hi looking for a set. May have to cut them for this engine, great if one end is off.
Cheers
Tim
I have a 5 gallon bucket of them. What are they worth to you?
Bruce
http://type4store.com/chromoly-pushrods.html
Not cheap, but just what the Dr ordered. They come with one tip removed. You will have to also get the adjustable one that you measure with.
And when you set up the valves, you set them to 0 lash. If you are using the adjustable foot adjusting screws, you make sure the foot will spin but you cannot get a feeler gauge under the foot.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)