Printable Version of Topic

Posted by: sb914 Jan 15 2017, 02:05 PM

What do ya got? It's for my 73 2.0 just need muffler only
Thanks

Posted by: euro911 Jan 15 2017, 02:49 PM

Turbo muffler ... AutoZone, O'Reilly's, Pep Boys

http://www.autozone.com/exhaust/performance-exhaust-muffler/thrush-welded-muffler-performance/285382_0/?_requestid=1315582

Posted by: ahycaramba Jan 15 2017, 05:11 PM

I have 3 different muflers to choose from. was going to clean them up and sell them. shoot me an offer if interested. the one with the heat exchangers are out of a 1.7l engine the other 2 not sure what exactly they are out of.
thanks,
Al

Posted by: Tom_T Jan 15 2017, 06:10 PM

It looks like that's a non-stock exhaust pipes too, if so, then you'll need to put up whether it's Bursch or whatever to match it.

If you still have the stock HEs or SSI ones - then the easiest route would be to get the Dansk made OEM banana muffler, & get the OEM exhaust gaskets & hardware (nuts, bolts, copper washers, etc.) from a reputable shop. Sierra madre up in Pasadena sells the Dansk & the kits, & they're close by if you wanted to drive up there to pick them up & save on shipping.


Tom
///////

Posted by: bdstone914 Jan 15 2017, 08:42 PM

If the rest of the pipes are solid enough you can do what Mark suggested and get a new replacement muffler and have it welded on.

Are you running the 2.0 type heat exchangers? If you go with a new muffler you would need to match it to what is on the car.

I was at Rons and saw some exhausts there. Did not get a good look as to type or condition.
Bruce

Posted by: bdstone914 Jan 15 2017, 08:45 PM

[/quote]
The only one that might work is the top black muffler one IF is is the 2.0 pattern and that is what he has ? OP has not clarified that.

Center one is an early 1.7 with smaller pipes as are the 1.7 heat exchangers.

Those are good boxes for a 1.7 but not a 2.0.

Posted by: Localboy808 Jan 16 2017, 06:02 PM

I have this 4 tip. It's for a 2.0 and in excellent condition. I paid 225 for it not knowing it was for a 2.0. I need one for my 1.7. Lmk if you are interested. I'd like to get my money back for it. But am open to an offer.

Posted by: Localboy808 Jan 16 2017, 06:04 PM

I might be interested in the middle muffler if the OP doesn't need it. He has first choice of course. If it's for a 1.7/1.8. Can you measure the flange width?

Posted by: Localboy808 Jan 16 2017, 06:08 PM

I also have this silver setup. I'm pretty sure it's from a 2.0 as well. Open to offers on it. I'll give you a good deal on it if it works for you.

Posted by: rhodyguy Jan 16 2017, 07:19 PM

Verify the bolt hole spacing on which ever system you decide on. Then make sure that's what's appropriate for your he's. The one in the upper left, post #6, is a 4-2-1 on the piping and the triangular flanges make for an easy muffler change. If it was right for my he's that's the one I would get.

Posted by: sb914 Jan 16 2017, 07:59 PM

I need to check to see exactly what I need ,thanks guys

Posted by: forrestkhaag Jan 19 2017, 11:03 AM

Hey Eddy / I have a really nice 2.0 muffler hanger bracket if you need one / 20 bucks picked up at Starbucks in Sunset Beach (plus a medium litchieo latte MoCallotto)?

Posted by: mapguy Jan 19 2017, 02:49 PM

I'll chime in...

I have a new, never mounted Bursch for 1.7/1.8 sitting in my garage. Will make you a deal on it.