Printable Version of Topic

Posted by: bdstone914 Jan 22 2017, 11:01 PM

Here are several bumpers from the Slits collection. They are in very good condition overall without obvious dents. I hosed them down and the pictures were taken with them wet which makes the chrome look grainy.

Early bumper with sharp corners. $600
Has been rechromed. Very straight. Surface rust on the face on the corners.

Blue and black painted. $250 each.

Chrome later bumper $300

Pics are not the best but I can give each of them a better inspection.

I am pricing them at what I think is the pries that good bumpers have sold for here.

These can be picked up at the Phoenix club swap meet March 5 or R & G Swap meet two weeks later. Yes you heard it here first folks. R & G Swap meet planned for March 19 . Shipping is available but be patient.

Better picture upon request.


Attached thumbnail(s)

Posted by: bdstone914 Jan 22 2017, 11:03 PM

Two more chrome bumpers

Souper duper Kustom center tow hook mount with reinforcement plate. Not sure it you are supposed to drill a hole through the license plate or just bent it out of the way to use the tow hook. Or leave the hole covered up and forget it is there. $150 Special. Or best offer.




Attached thumbnail(s)

Posted by: Jeff Bowlsby Jan 23 2017, 12:01 AM

Gustl, our Austrian friend was looking for a nice sharp cornered rear bumper for his very original /6. Wolfgang, you in the house?

Posted by: BillC Jan 23 2017, 09:13 AM

I'd like to buy the black-painted rear bumper. PM sent.

Posted by: a914luvr Jan 23 2017, 09:38 AM

I've seen the early rear bumper and it's pretty nice but I seem to remember at least 1 of the mounting brackets looks to have been re-welded.

Posted by: Gustl Jan 23 2017, 11:58 AM

Jeff, thank you very much for your message

but ... even if it's nice, I would buy a rear bumper only, if I could personally check it before ...

Posted by: bdstone914 Jan 24 2017, 08:45 PM

Understood. I will be giving it a better cleaning and inspection. it does have two extra holes in the lisence plate area. It has been reworked as shown by the marks on the inside.